Transmission and Distribution (Recruitment drive only)

Job Description

Overview

This role is only open for a recruitment walk in drive dated 7th February.

Please note that this applies exclusively to candidates attending the recruitment drive in person. Applicants who are not physically present for the drive will not be considered.

Transmission and Distribution Division includes teams working on different industries Power T&D team. The Power T&D team is presently working on projects in the UK USA Canada Australia and ME.

The Power T&D team is looking for experienced engineers in HV Plant /Substations discipline as we look to grow the team in line with business requirements. So if you are interested in working for an internationally renowned consultancy and working on some challenging projects across UK Canada & ANZ come join us at AtkinsRéalis.

Your role

Using your experience and knowledge you will be a part of the delivery of a variety of projects drawing upon the wider team for the technical engineering requirements and building a strong relationship with our clients. You will be client-facing working with the team and making sure it meets our clients expectations.

We are currently hiring for the following roles:

Engineer- Substation

Using your experience and knowledge you will be a part of the delivery of a variety of projects drawing upon the wider team for the technical engineering requirements and building a strong relationship with our clients. You will be client-facing working with the team and making sure it meets our clients expectations.

You will be taking up the following responsibilities:

• Technical Specification preparation.
• Design basis feasibility report technical reports etc.
• SLDs Layouts sections calculations such as bus bar sizing short circuit force AC/Dc schematics Erection diagrams clearance diagrams General arrangement of substation.
• You should have experience of substation for 400kV and above with latest international standards such as IEEE IEC etc.
• Complete design calculations LVAC & DC System Sizing CT & VT adequacy checks Cable Sizing etc.
• Contribute to Tendering activities by supporting with preliminary design documentation & drawings Bill of Quantities Engineering Man Hour Estimates etc.
• Providing support for bids cost estimation preparation of tender documents etc.
• Mentoring other engineers and help them become better engineers.

About you

• Graduate/Post-Graduate degree in Electrical Engineering with around 5 to 10 years of experience in Design and engineering of HV substations up to 400kV or above.
• Hands-on Experience in design substations calculations and FEED engineering.
• Ability to complete design deliverables as per the Client requirement.
• Preference shall be given to those candidates who have experience with UK or USA Clients.
• Ability to produce design documentation Design Basis Report Case Studies and Project Design Specification.
• Be competent to check the design drawings & documents produced by other engineers before the final approval by more competent engineers.
• Member of IET & working towards Chartered Engineer accreditation.
• Desirable Worked in projects for UK USA and other international projects.

Behavioural requirements:

• Strong English Communication Skills needed to co-ordinate with client and other internal stake holders.
• Be a part of the team which is working at different geographical locations and co-ordinate for the needs of the project.

Software & Design Tools:

• MS Office
• AutoCAD 2D/3D
• Grounding /earthing
• ETAP
• Engineering calculations

Engineer - Power System Study

• In depth knowledge of conducting simulations and analytical studies for Transmission and Distribution Planning Load and generation interconnection Integration of renewables.
• Able to prepare simulation study models and carry out power system studies including but not limited to.
• Steady state and Dynamic power flow analysis.
• Short circuit calculation.
• Transient & Dynamic Stability Studies.
• Power Quality analysis.
• Arc Flash Studies.
• Grid compliance studies for Wind Solar BESS and Hybrid projects.
• Candidate should be able to carry out following protection calculations.
• Overcurrent and earth fault protection co-ordination for the transmission and distribution network.
• Unit protection calculation for Transformer motor busbar generator etc.
• Carry out consulting research and development study projects.
• Analyse study results and recommend solutions as per requirements and able to discuss / clarify Clients with help of results.
• Prepare study reports and other technical documentation.
• Respond to request for proposals (RFP) by preparing proposals & estimation of man-hours.
• Strong conceptualization ability strong interpersonal communication and organizational skills are a must including the capability to explain complex technical issues to decision-makers and project teams. Candidate must have good oral and written communication skills be willing to travel and work successfully in a customer focused project-oriented environment.

About you

• Masters / Bachelors Degree in Electrical Engineering with 8 years of relevant industrial experience.
• Knowledge of PSSE MATLAB / Simulink and any other system study software.
• Competency in Python coding.
• Experience of working on Traction simulation studies.

Engineer - P&C Substation

Using your experience and knowledge you will be leading the delivery of a variety of projects drawing upon the wider team for the technical engineering requirements and building a strong relationship with our clients. You will be client-facing responsible for the delivery of our work and making sure it meets our clients expectations.

You will be taking up the following responsibilities:

• Produce design drawings & documentation for Front End Engineering Design (FEED) such as Protection Single Line Diagram (or) Key Line Diagram (KLD) Work Specification Assessment of requirement for Auxiliary Systems etc.
• Complete Detailed Design Deliverables Circuit Diagrams Wiring Diagrams Cable Schedules Cable Block Diagrams General Arrangement Diagrams Termination Schedules etc.
• Interface substation auxiliary systems and other equipment with Protection & Control Systems.
• Complete design calculations LVAC & DC System Sizing CT & VT adequacy checks Cable Sizing etc.
• Contribute to Tendering activities by supporting with preliminary design documentation & drawings Bill of Quantities Engineering Man Hour Estimates etc.
• You could also be working on Fault Current Calculations Relay Settings and IED Configuration based on the skill set and project requirements.

About you

• Graduate/Post-Graduate degree in Electrical Engineering with around 6 - 8 years of experience in Design of Protection & Control Systems.
• Hands-on Experience in design of protection systems applied to Busbars Feeders Transformers Reactors etc. on the 132kV and above systems.
• Appreciation for the principles of Current & Voltage Transformers Auto Reclose Circuit Breaker Fail & Plant Auto Switching arrangements.
• Ability to complete design deliverables Single Line Diagram (SLD) & Protection SLD (or) Key Line Diagram (KLD); Circuit Diagrams Wiring Diagrams General Arrangement Diagrams Cable Schedules Cable Block Diagrams and Termination Schedules etc.
• Ability to produce design documentation Design Basis Report Case Studies and Project Design Specification.
• Member of IET & working towards Chartered Engineer accreditation.

Behavioural requirements:

• Strong English Communication Skills needed to co-ordinate with client and other internal stake holders.
• Be a part of the team which is working at different geographical locations and co-ordinate for the needs of the project.

Software & Design Tools:

• MS Office
• AutoCAD 2DTrimble (Amtech) - Desirable
• ETAP/PSCAD Desirable

Reward & benefits

Explore the rewards and benefits that help you thrive at every stage of your life and your career.

This includes:

Comprehensive life insurance coverage.

Premium medical insurance for you and your dependents.

Generous annual leave balance.

Flexible and hybrid work solutions.

Remote work opportunities outside of country.

Company gratuity scheme.

Discretionary bonus program.

Relocation assistance.

Employee Wellbeing Program: 24/7 access to specialists in finance legal matters family care personal health fitness and nutrition.

Seize every opportunity to sharpen your skills expand your expertise and be recognized for the impact you make.

About AtkinsRéalis

Were AtkinsRéalis a world-class engineering services and nuclear organization. We connect people data and technology to transform the worlds infrastructure and energy systems. Together with our industry partners and clients and our global team of consultants designers engineers and project managers we can change the world. Were committed to leading our clients across our various end markets to engineer a better future for our planet and its people.

Find out more.

Worker Type

Job Type

At AtkinsRéalis we seek to hire individuals with diverse characteristics backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender ethnic or national origin sexual identity and orientation age religion or disability but enriches itself through these differences.