Avionics Technician KC-130J Program Kuwait City, Kuwait

Overview

The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting maintenance and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector breaker assemblies component removal inspection and the course of assigned duties will apply a thorough knowledge of electrical avionics and COM/NAV engineering principles techniques and methods necessary to repair and maintain aircraft applicable equipment and systems. Possess competent abilities in the use and application of hand tools power tools and associated precision measuring equipment used in support of system testing evaluation and operation. Possess the ability to read and interpret manufacturers maintenance manuals service bulletins technical data engineering data diagrams schematics and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.

Description:

Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems e.g. data bus antennas software displays communications/navigation equipment systems integration system/component failure analysis inspection repair and testing of COM/NAV and electrical systems through engineering principles techniques and methods in the maintainability of existing KC-130J equipment and systems.

Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s to include performing calibration procedures and required functional tests.

Performance abilities include maintenance and serviceability procedures to supported components to include wiring and wiring connector condition breaker assemblies component removal inspection reinstallation and incorporates applicable technical directives and bulletins.

Possess competent abilities in the use and application of hand tools power tools and associated precision measuring equipment used in support of system testing evaluation and operation to include complying with established local tool control programs.

Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications orders and directives and the processes to document such maintenance actions

Read interpret and apply manufacturers maintenance manuals service bulletins technical data engineering data diagrams schematics and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components

Use illustrated parts breakdowns (IPB)s to determine material requirements research associated part numbers and order parts to complete maintenance actions.

Has the ability to review interpret and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data

Performs periodic special hourly conditional and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s Maintenance Requirement Cards (MRC)s manufacturers specifications and all applicable directives orders and instructions as directed through Maintenance Control.

Removes troubleshoots inspects reinstalls and/or replaces aircraft COM/NAV and avionics components radios antennas electrical wiring and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control

Interpret MIMs and all associated maintenance publications orders and directives to perform maintenance and use processes to document such maintenance actions ensuring the accurate entry of data into the locally used computer database system.

Performs applicable O and I level battery maintenance functions as required per applicable maintenance manuals.

Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR

Performs scheduled and unscheduled maintenance actions to include cross-training in all required essential technical specialties to facilitate the removal inspection repair/replacement installation and test procedures of aircraft component parts survival equipment (life rafts first aid kits etc..) pneumatic systems environmental control systems fuel systems avionics systems and all associated aviation life support equipment airframes and power plants systems.

Inspect control and prevent corrosion of aircraft metals and system components using established and approved procedures.

Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/

Conducts off station maintenance when required.

When necessary perform other duties and supervisory functions critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).

Must have a working knowledge of and be proficient with (input and extract data) of computers aircraft data debriefing and diagnostic software (DTADS) and maintenance information systems.

Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature less than adequate lighting dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms stand walk stoop kneel crouch or crawl and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds

Education / Certifications:

High School Diploma

Must be able to obtain/maintain the following required certifications/qualifications:

- Aviation Gas Free Engineering (AVGFE) certification

- Auxiliary Power Unit (APU) run qualification

-I Level Battery Maintenance certification

- Applicable Support Equipment licensing

- Electric Shop & Comm Nav (210 & 220) Collateral Duty Inspector (CDI) qualification

- Electric Shop & Comm Nav (210 & 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification

- Corrosion Prevention and Control qualification

- Confined Space Entry certification

Experience:

Four years maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred..

Must have a working knowledge of first aid procedures to be used in an emergency.

Must have a strong knowledge base of aviation maintenance programs processes and procedures (example: Safety Tool Control HAZMAT inspection programs administrative requirements support equipment calibration/torque programs & procedures).

Specific Requirements:

Must be United States (U.S.) citizen be able to read write and understand the English language

Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.

Must have a valid U.S. Drivers License.

Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.

Must be willing to administrate maintain and manage maintenance programs (ex. Tool Control HAZMAT FOD MetCal etc) as required by local policies.

Must be willing and able to comply with all contractual Performance Work Statement (PWS) Requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance NLG & MLG Tire re-building MLG Brake repair/rebuilding Battery maintenance support and Oxygen Regulator testing/repair.

Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.

Must be willing to work flexible hours to include day shift night shift or weekend duty and travel as part of a maintenance recovery team as required.

Must have the ability to communicate clearly concisely and follow instructions when directed on assigned tasks.

Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties) marshalling/recovering aircraft fueling towing mooring and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance.

As a Subject Matter Expert must be willing to perform in-depth research troubleshoot and perform O and I level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements researching part numbers ordering tracking and receiving materials as required to facilitate aircraft inspections/repairs.

Must be able to communicate directly with the customer pilots air crew members management and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed.

Must have an in-depth knowledge of aircraft technical orders/job guides/publicationsread interpret follow and comprehend schematic diagrams drawings charts and technical publications.

Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.

Must be able to overcome cultural differences and to think outside the box innovate and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.

Must perform as a team member contributing to the success of the C-130J maintenance department.

Must be dependable and timely in managing assigned tasks perform consistent quality maintenance.

Must have a proven ability to work independently with minimal direction.