Powder Process Engineer (1704)

We connect science to life for a better future.

LG Chem will become a world-class corporation that creates new value for our customers based on science beyond chemistry.

Job Summary (Basic Functions): LG Chem Advance Materials Inc. (LGCTA) is actively searching for a Powder Process Engineer will be an individual contributor reporting to the Production Manager and work alongside our Powder Solutions team.

The Powder Process Engineer will deal with stabilization of powder flowability issues in pre- and post-processing and improve process loss by managing the bag filter efficiency and issues for our new cathode material manufacturing plant in Clarksville Tennessee.

The Powder Process Engineer will report to the Powder Solutions Team Manager and is a member of our powder solutions team serving as a core engineer and technical resource to optimize the installation parameters and process parameters in commissioning test observe the load cells calibration perform the DOE(Design Of Experiment) and analyze the capability of the process. The Powder Process Engineer will also resolve the issues related to powder flowability such as weighing transfer mixing and milling process and verify the improvement actions and monitor the result of improvement. Also Powder Process Engineer will minimize the process loss by managing the bag filter issues according to standards and deal with the audit challenge of customer.
This role will serve as a powder process expert establish the standard & regulation train and distribute standards & regulations to workers and work with related department on day-to-day issues. The Powder Process Engineer will develop a sound understanding of the plants equipment & process and an understanding of analysis results of powder flowability properties.

The Powder Process Engineer is a vital member of our powder solutions team and will support special projects related to process improvement process loss reduction and new product introduction.

This position is based full time in Clarksville TN and is not a remote role.

What Youll Be Doing

Essential Functions (include but are not limited to):

New Factory Early Stabilization:

• During the new installation phase inspect the process equipment conditions and installation parameters related to flowability parameters & bag filter and match up the conditions with P&ID document parameter check list and recipe.
• Before DOE phase inspect the calibration status of equipment load cells and address the issues when calibration result is out of standard.

Before DOE coordinate the schedule of DOE with related department establish the new standard of new equipment.

DOE (Design of Experiments) Evaluation and Mass Production:

Coordinate the DOE schedule and operate the equipment with all relevant departments in a three-shift system to keep operations running 24/7 before mass production.

During DOE & mass production phase monitor the batch-by-batch trend and the process parameters related to flowability process & bag filter with process technology team and manage the process parameters within control lines process capability process loss and trouble shooting history.

During DOE & mass production phase monitor and resolve flowablity issues such as weighing transfer mixing and milling processes to minimize the downtime. Conduct sampling and analyze the flowablity properties with quality team and process technology team.

During DOE & mass production phase monitor manage the process loss from bag filter abnormaility by using the monitoring sensor and system and quickly resolve the bag filter issues.

Analyze the product and monitor the flowability properties related to product issues and maintain company and customer guidelines for quality.

Establish and manage a job training program for all manufacturing processes procedures and techniques; document work standards (guides SOPs etc.) for new operators technicians and engineers in various areas of flow engineering. Provide technical support as needed.

Technical Support and Audit Challenge:

Deal with internal and external audit challenges and provide alternative plans and implement corrective actions.

Provide technical support for special projects related to process improvement process loss reduction and new product introduction.

Manage and improve the key performance index related to flow engineering to ensure manufactured products meet or exceed established customer requirements

Data Analysis:

Monitor the product analysis data from QA/QC and address the issues related to flowablility properties of product according to standards.

Collaborate in the analysis of production data and lead activities to improve plant equipment effectiveness and reduce waste within operations

Conduct root cause analysis for manufacturing issues and non-conformances implementing corrective actions to prevent recurrence.

Qualifications Skills and Experience: What Were Looking For

Competencies/Desired Skills:

Collaborating for Superior Results: Partner with colleagues and customers to get to the best solutions. Build successful relationships and develop a high level of trust.

Challenges the status quo and does not settle for good enough. Holds self and colleagues accountable for actions and results. Require excellence not only in results but in how we achieve them.

Technical & Analytical skills: Is capable of quantifying taking and managing appropriate risks. Possesses a demonstrated competence in analytical methodologies and engineering tools such as CAD SEM-EDS analyzer P&ID Lean Six Sigma SPC and capability analysis.

Communication: Ability to communicate in written and oral form detailed and technical engineering information guidelines and standards/statutes/codes/regulations to various audiences to ensure that the information and message are understood and to seek compliance. Ability to deliver presentations suited to the characteristics and needs of the audience such as negotiating solutions among different parties or providing expert support.

Engineering review analysis and decision making: Knowledge of and ability to use effective approaches for choosing a course of action or developing appropriate solutions after reaching conclusions. Ability to make decisions and take action consistent with available facts constraints and anticipated consequences. Identify issues obtain relevant information relate and compare data from different sources and identify alternate solutions.

Education: Bachelors degree in Mechanical Engineering Chemical Engineering Materials Science and Engineering or equivalent engineering experience. Additional relevant work experience is a plus.

Requirements:

Minimum 3 years of stable work history is required.

Minimum 3 years experience in manufacturing engineering or a technical field preferably in powder chemical glass refinery plastics food pharmaceutical semiconductor automotive or batteries.

Able to work multiple shifts including weekends or be asked to work supplemental hours and participate in on-call rotation during DOE period.

Able to respond off hours and weekends to troubleshoot plant issues.

Experience utilizing lean manufacturing concepts with a proven track record of lean / six sigma SPC and capability analysis.

Able to sit stand walk kneel crouch stoop squat crawl twist climb and lift 50 lbs.;

Exposure to heat noise outdoors vibration confining workspace chemicals explosive materials mechanical hazards and electrical hazards.

Able to travel to different sites and locations; undertake long-term international travel.

Able to wear personal protective equipment (PPE) and other garments as needed. This may include safety shoes safety glasses Masks full body gowns hair nets gloves and hearing protection and air respirator.

Preferred Qualification/What Wed Like to See:

Understanding the PLC control system load cell calibration and bag filter & dust collecting system ESD system.

Find and Address problems of technical complexity on identifying Processes.

Propose innovative solutions accordingly and Develop band New Products.

Excellent communication skills: verbal written and presentation

Proficiency in the use of PC and Microsoft Office suite (Microsoft Excel Power Point Word etc.)

Excellent analytical ability to effectively analyze production data.

Work Environment

The working conditions (including the general work environment and table with physical/mental demands) in this job description reflect the typical conditions you can expect while performing the essential functions of this job. LGCTA provides reasonable accommodations appropriate changes and adjustments to applicants and employees to be considered for a job opening enable them to perform a job gain access to the workplace and enjoy the benefits and privileges of employment.

General Work Environment. The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The incoming primarily works in an office setting but work requires exposure to manufacturing environment operations such as moving sample of product noise fumes vibrations dust etc to manage plant.

All qualified applicants will receive consideration for employment without regard to race color religion sex age gender sexual orientation gender identity national origin disability status as a protected veteran or any characteristic protected by applicable federal state or local law.