Electrical Subsystem IT Engineer KGS Integrated Systems Solutions

Project Kuiper is a initiative within Amazon that aims to revolutionize global connectivity through the development of a stateoftheart Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering highspeed low latency internet services to underserved and unserved communities and remote communities around the world. By leveraging satellite technology we are working towards a future where everyone has access to reliable and highquality internet connectivity regardless of their location.

The Kuiper Government Solutions (KGS) Engineering organization is a multidisciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.

The Electrical Integration & Test (I&T) engineer will engage with an experienced crossdisciplinary team to design integrate and test innovative spacebased and terrestrial electronics. The Electrical I&T Engineer will work closely with colleagues throughout Kuiper Government Solutions (KGS) interdisciplinary teams and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The Electrical I&T Engineer must be responsive flexible innovative and able to succeed within a collaborative fastpaced and dynamic environment.

As a member of the KGS Engineering Integrated Systems Solutions organization the Electrical I&T engineer will be responsible for developing the architecture and executing the design build and validation of test systems for complex electronic subsystems. The candidate will have the capabilities to develop test procedures test software test scripts APIs and automation to enable test and verification at various products levels including but not limited to systemonchip (SoC) calibration algorithm verification silicon wafer and photonics test test automation and data analysis for electronics optoelectrical subsystems and RFsystem level tests including environmental tests. The candidate will be responsible for ensuring the test architecture supports all aspects of the integration test verification and validation of one or more of the following: the satellite bus electronic subsystems RF payloads optoelectrical payloads custom ground terminals or custom user terminals. This includes testing analyzing and optimizing the test support equipment to the particular satellite or ground element being developed. Testing efforts include functional and performance testing through various environmental conditions as required and it will be the candidates responsibility to ensure the test systems enable efficient test and requirements verification.

The successful candidate will have demonstrated experience working on largescale programs with a diverse set of talented individuals as well as with partner organizations (including government agencies).


Key job responsibilities
Provide Electronics Integration and Test leadership to one or more of the following: the satellite bus electronics RF payloads optical payloads custom ground terminals or custom user terminals.
Provide electronics test design technical expertise to one or more of the following products and services: satellite bus RF payloads optical payloads custom ground terminals or custom user terminals.
Specify and develop endtoend payload or subsystem integration and test plans and procedures to validate performance against customer and/or partner requirements
Create test algorithms test scripts and calibration routines as part of performing lab and field evaluation of integrated bus payloads or subsystems
Analyze electronics test data and engage with cross functionally with teammates partners suppliers or customers to evaluate the product performance and provide proactive feedback on potential improvements.
Architect design and validate electrical support equipment necessary to enable test and requirements verification
Prepare reports documenting test results test coverage performance results and other key performance indicator (KPI) metrics and communicate issues effectively with developers and managers
Effectively manage and track to closure test anomalies defects and bugs; Debug rootcause and make continuous improvements of control systems in a highrate production environment

This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. governmentimposed requirements related to the nature of the work and/or where it will be performed.

About the team
Kuiper Government Solutions (KGS) Engineering is a multidisciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both spacebased and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution including architecture development requirements and interface definition through assembly integration and test (AI&T). verification and postdelivery and operational support.

Bachelors degree in electrical engineering
5 years of experience in board level design and design verification for aerospace automotive or consumer electronics products; OR 5 years of experience building complex test systems including test software systems
5 years of experience developing electronics test requirements plans and procedures for electrical product design verification and validation.
5 years of experience in the use of standard electronic lab test equipment (i.e. network analyzers oscilloscopes spectrum analyzers function generators multimeters etc.
5 years of experience in embedded software or FPGA verification I Xilinx tools for aerospace automotive or consumer electronics products; OR 5 years of experience building complex test systems including integrating test software
Experience with testing satellite communications payloads optical communications payload spacecraft bus and constituent subsystems or space vehicle level.

Masters Degree or PhD in electrical engineering
High sense of ownership urgency and drive; resourceful and able to deliver results with minimal direction
Excellent oral and written communication and leadership skills with strong sense of ownership and drive
Ability to coordinate between engineering test lab and technicians (if applicable) and schedule testing resources
Experience as the technical lead leading small groups of other test engineers across multiple designs
Experience in developing and reviewing requirements to support various test phases
Experience in test plan development related to established space hardware test standards (GEVS/SMCS016 or military standards (MILSTD810 DO160
Strong debugging/troubleshooting skills
Solid understanding of electrical engineering test fundamentals
Computational problem solving and test automation/optimization in one or more of the following: Python Matlab LabVIEW C/C Docker Rust on a Linux platform.
Experience with design or test of communication busses switching power supplies electric motors IMUs sensors RF and highspeed electrical signal characterization
Experience with design or test of circuit boards with complex microcontrollers systemonchip (SOCs) ASICs or FPGAs
Experience in design verification of highspeed interfaces signal integrity and protocol compliance
Experience with communication and electrical system test equipment such as vector spectrum analyzers vector signal generators power supplies and oscilloscopes
Experience with incoming calibration checks and developing calibration procedures
Broad knowledge of satellite communication link budgets (RF or Optical)
Broad knowledge and experience in multiple disciplines related to satellite or space systems including design integration test operation maintenance and configuration/data management
Experience supporting system engineering of space and/or ground systems development efforts including meeting cost schedule and performance goals
Demonstrated experience working with government agencies

Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status disability or other legally protected status.

Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees supervisors and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees supervisors and staff to ensure exceptional customer service; and follow all federal state and local laws and Company policies. Criminal history may have a direct adverse and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above as well as the abilities to adhere to company policies exercise sound judgment effectively manage stress and work safely and respectfully with others exhibit trustworthiness and professionalism and safeguard business operations and the Companys reputation. Pursuant to the Los Angeles County Fair Chance Ordinance we will consider for employment qualified applicants with arrest and conviction records.

Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process including support for the interview or onboarding process please visit for more information. If the country/region youre applying in isnt listed please contact your Recruiting Partner.

Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105600/year in our lowest geographic market up to $185000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on jobrelated knowledge skills and experience. Amazon is a total compensation company. Dependent on the position offered equity signon payments and other forms of compensation may be provided as part of a total compensation package in addition to a full range of medical financial and/or other benefits. For more information please visit This position will remain posted until filled. Applicants should apply via our internal or external career site.