Mohammad Abdallah Al Dali

Review sites and create metrics and goals to achieve design intent and ensure processes
are optimized. Manage clients and contractors to reach objectives.
• Inspecting onsite research.
• Create reports and site-specific documentation about progress, completion and
obstacles.
• Resolving onsite malfunctions.
Performing quality control tasks on budgets, schedules, plans, and personnel
performance and reporting on the project’s status.
• Verify equipment installations and environmental compliance.
• Ensuring the project’s compliance with the applicable codes, practices, policies,
performance standards, and specifications.
• Supporting the construction team with cables pulling and termination and installation.
• Supervising the cable trenches excavation and preparation.
• Calibrating the testing and measuring instruments.
• Making sure that the workplaces are safe.
• Monitoring the general work environment, and inspecting buildings and machines for
hazards and safety violations.
• Designing the needed special safety clothing and safety devices to protect workers from
injury when operating machines.
• Educating the workers on the safety rules and instructions.
• Perform the commissioning tests on the PV system all, and these tests include:
o DC cables tests such as (continuity test, polarity test, insulation or
megger test at 1000 v applied voltage).
o MV cables tests such as (polarity test, continuity test, insulation test at 5
kv applied voltage, very low frequency VLF test for half an hour for each
cable).
o PV arrays tests such as (Voc and Ish measuring for each string, DC string
cables insulation test, I-V curve test, PV check test, earth test, thermal
camera test for the PV modules and electrical installations inside each
combiner box).
o CCTV system cables tests such as (continuity and insulation tests).
o Communication cables (data logger test).

Demonstrated leadership in managing MEP construction teams.
Oversaw the seamless execution of testing and commissioning processes for diverse facilities.
Ensured optimal functionality of electrical and mechanical utilities.
Managed stakeholder demands.
Effectively communicated project progress.
Addressed concerns to ensure project success and client satisfaction.
Overseeing materials inventories.
Managing invoices.
Ensured timely procurement.
Managed cost-effective project management.
Led the commissioning and optimization of state-of-the-art chiller systems.
Integrated chiller systems with airport cooling requirements.
Maximized energy efficiency.
Spearheaded commissioning processes for advanced electric water heaters.
Ensured precise temperature control.
Ensured energy efficiency.
Ensured seamless integration with facilities’ hot water supply system.
Oversaw commissioning of HVAC systems.
Performed precision tuning of air distribution.
Managed temperature control.
Managed humidity levels.
Created a comfortable and energy-efficient environment.
Managed the installation, operation, and maintenance of power and lighting systems.
Managed LV panels.
Managed fire alarm and fire fighting panels.
Managed fire fighting systems.
Managed generators during project execution and handover.
Successfully managed a project budget of approximately 180,000,000 Saudi Riyal.
Achieved cost savings of approximately 500,000 Saudi Riyal through strategic negotiation with clients regarding unnecessary material requirements and tests.

Selected amongst less than 5% of applicants to participate in a 14-week Data Science for All Fellowship focused on solving real-world data science business cases.
Engaged in a rigorous advanced data analytics program using Excel for data engineering.
Used SQL for data manipulation.
Used Python for analysis and modeling.
Leveraged Jupyter notebooks for data exploration and dashboarding with Tableau, Looker Studio, and Power BI.
Developed expertise in data modeling and KPI monitoring through the creation and maintenance of data models, reports, and dashboards.
Participated in a team working on the graduation capstone project that achieved first place ranking.
Analyzed SPI time-series data to identify trends and patterns in social progress across countries.
Uncovered key drivers of social progress in different countries and regions.
Contributed to evidence-based decision-making.
Contributed to resource allocation.
Contributed to targeted strategies for addressing social challenges and enhancing overall societal wellbeing.

Monitored gas gensets, inverters, and medium voltage fields.
Ensured efficient power plant operations.
Executed planned and emergency maintenance tasks.
Swiftly resolved malfunctions and damages.
Assisted in materials and machinery procurement.
Maintained up-to-date operations logs.
Conducted measurements and checks of gas infrastructure.
Prepared checklists for daily tasks.
Managed leachate water sanitation.
Managed oil sample checks.
Managed oil and gas monitoring instruments.
Prepared reports.
Prepared gas records.
Prepared metrics frameworks for project evaluation and control.
Maintained and repaired low and medium voltage equipment.
Collaborated in gas gensets overhaul projects.
Participated in night shift stand-by.
Monitored power systems through SCADA systems.
Periodically checked PLC systems for maintenance needs.
Optimized HVAC and cooling systems.
Regularly replaced air filters.
Cleaned evaporator and condenser coils.
Calibrated thermostats for the HVAC system.
Monitored and maintained coolant levels.
Inspected radiators.
Conducted pressure tests.
Inspected hoses for the engine cooling system.

Reviewed sites.
Established metrics and goals to align with design intent.
Optimized processes.
Managed clients and contractors to achieve project objectives.
Conducted comprehensive onsite research and inspections to ensure project quality and progress.
Created detailed reports and site-specific documentation.
Addressed onsite malfunctions promptly.
Implemented effective solutions.
Performed quality control checks on budgets, schedules, plans, and personnel performance.
Regularly reported on project status.
Verified the proper installation of equipment.
Ensured compliance with environmental regulations.
Ensured project adherence to applicable codes, industry practices, policies, performance standards, and specifications.
Supported the construction team by assisting with cable pulling, termination, and installation tasks.
Supervised cable trench excavation and preparation.
Calibrated testing and measuring instruments.
Maintained workplace safety.
Designed specialized safety clothing and devices to protect workers during machine operation.
Educated workers on safety rules and instructions.
Conducted commissioning tests on PV systems.
Conducted DC cable tests.
Conducted MV cable tests.
Conducted PV array tests.
Conducted CCTV system cable tests.
Conducted communication cable tests.

Led quality standards implementation.
Led inspection processes.
Led test methodologies.
Developed quality plans, documents, and reports to ensure compliance.
Assisted in achieving process certifications.
Ensured adherence to quality standards.
Reported quality issues, trends, and losses to management.
Oversaw the calibration of testing equipment.
Prepared necessary documents and secured approvals for commissioning tests.
Educated workers on safety equipment usage and safety rules and instructions.
Designed specialized safety clothing and devices to safeguard workers during machine operation.
Formulated project parameters.
Assigned responsibilities.
Monitored project teams for efficiency and profitability.
Conducted quality control tasks on budgets, schedules, plans, and personnel performance.
Collaborated with senior engineers to optimize project methods.
Established field test methods.
Monitored field test quality.
Ensured project compliance with relevant codes, practices, policies, performance standards, and specifications.
Assessed and reported safety hazards related to commissioning tests.
Monitored construction progress closely to maintain quality and safety standards.
Performed commissioning tests including DC and MV cable tests, PV array tests, inverter tests, and SCADA system tests.
Served as the quality assurance representative to the Materials Review Board (MRB).

Developed, applied, and maintained quality standards for PV system installation.
Designed and implemented process control, improvement, testing, and inspection methods.
Acted as the representative for the PV project's commissioning team.
Protected the owner's interests by ensuring contractors adhered to project specifications and drawings.
Closely monitored construction progress.
Ensured equipment and materials complied with specifications.
Conducted commissioning tests to guarantee the PV power plant's proper operation.
Conducted DC and MV cable tests.
Conducted inverter testing.
Conducted SCADA system tests.
Ensured the PV power plant operated at the expected voltage, frequency, and power factors.
Performed SCADA tests to ensure proper connections of arrays and strings to inverter stations without disconnections.

Assessed preventive maintenance needs for packing machines.
Forecasted spare parts requirements.
Analyzed repetitive machine failures.
Coordinated with department heads to optimize operational systems.
Ensured company operations met specifications.
Supported product lifecycle management processes for on-site packaging.
Contributed to the review and optimization of packaging processes.
Contributed to the purchase of new packaging machinery and equipment.
Controlled and directed the validation effort for existing and new packaging-related processes.
Possessed knowledge of packaging materials, fabrication methods, sealing, sterilization, and their effects.

Applied engineering concepts to optimize equipment.
Applied engineering concepts to optimize procedures.
Applied engineering concepts to optimize departmental budgets.
Analyzed repetitive equipment failures.
Forecasted spare parts requirements.
Assessed necessary maintenance tools and skills for efficient equipment maintenance.