نبذة عني
Seasoned RF Optimization Engineer with over six years of industry experience. Proficient in developing automated optimization tools using Python and VBA. Adroit in data analysis and visualization using Tableau, seeking a…
Seasoned RF Optimization Engineer with over six years of industry experience. Proficient in developing automated optimization tools using Python and VBA. Adroit in data analysis and visualization using Tableau, seeking a position that demands initiative, responsibility, and challenge.
الخبرة
LTE RF Optimization Engineer
Site audits and QA inspections to ensure correct build, to include alarm reporting
and resolution, golden parameter settings, TAC audit, PCI conflicts, power audits,
tilts, azimuths, RET functionality, and identification, etc.
✓ Timely and regular reporting of all activities.
✓ Optimization of mobile network to meet daily performance KPIs (Accessibility and
Retainability, LTE THPT, Latency, and Mobility Success Rates)
✓ Implementation of new features to allow growth of network performance.
✓ Responsible for Bandwidth Expansion project (from 15 to 20 MHz).
✓ Optimize the new rollout sites KPIs.
✓ Collaborating with other teams, such as the core team and the transport team, to
ensure that the LTE network is working seamlessly with other parts of the network.
✓ Enhance DT Radio condition (RSRP/SINR/RSRQ) over LTE clusters.
✓ Handling LTE switches to improve DL/UL THPT (EPF, IRC, DL Scheduling
switches, CQI Adjust switches, CA algorithm switches, MIMO Audit …etc.).
✓ Optimizing radio frequency (RF) parameters, such as power levels, antenna tilt,
and handover parameters, to improve network performance.
✓ Load Balance over LTE carriers using Tilt Actions, MLB feature, Priority
parameters, Mobility parameters.
✓ Analyzing network performance data to identify areas for improvement, such as
areas with poor coverage, low throughput, or high latency.
✓ Planning and executing network optimization projects, such as site upgrades or
new site deployments.
✓ Perform network tuning using parameter optimization.
✓ Ensure data integrity of various morphology/topography databases and drive test
data for Network optimization.
✓ Create Templates using Tableau. In addition, Design Automated tool using VBA &
python.
LTE RNO Engineer (Sudani Telecommunication MS –Outsourcing)
Site audits and QA inspections to ensure correct build, to include alarm reporting and resolution, golden parameter settings, TAC audit, PCI conflicts, power audits, tilts, azimuths, RET functionality, and identification.
Timely and regular reporting of all activities.
Optimization of mobile network to meet daily performance KPIs (Accessibility and Retainability, LTE THPT, Latency, and Mobility Success Rates).
Implementation of new features to allow growth of network performance.
Responsible for Bandwidth Expansion project (from 15 to 20 MHz).
Optimize the new rollout sites KPIs.
Collaborating with other teams, such as the core team and the transport team, to ensure that the LTE network is working seamlessly with other parts of the network.
Enhance DT Radio condition (RSRP/SINR/RSRQ) over LTE clusters.
Handling LTE switches to improve DL/UL THPT (EPF, IRC, DL Scheduling switches, CQI Adjust switches, CA algorithm switches, MIMO Audit …etc.).
Optimizing radio frequency (RF) parameters, such as power levels, antenna tilt, and handover parameters, to improve network performance.
Load Balance over LTE carriers using Tilt Actions, MLB feature, Priority parameters, Mobility parameters.
Analyzing network performance data to identify areas for improvement, such as areas with poor coverage, low throughput, or high latency.
Planning and executing network optimization projects, such as site upgrades or new site deployments.
Perform network tuning using parameter optimization.
Ensure data integrity of various morphology/topography databases and drive test data for Network optimization.
Designed automated tools using VBA and Python, and created templates using Tableau.
Radio & Core Performance Management Expert Sudani Telecommunication MS –Outsourcing
Set up and managed the Radio & Core Performance Department.
Utilized Tableau and Python to visualize Radio and core (PS core & CS core) KPIs.
Ability to work with large amounts of information and see the ‘bigger picture’.
Developed Network KPIs Degradation Templates (Daily, Weekly, and Monthly).
Analyzed degradation cases and provided recommendations for resolutions.
Critical thinking: able to look at numbers, trends, and data and come to new conclusions based on the findings.
Attention to detail.
A high level of mathematical ability.
Supervised and provided technical support for the performance team.
GSM RNO Engineer (Sudani Telecommunication MS –outsourcing)
Responsible for checking and optimizing daily top worst cells.
Network audit for LTE & GSM neighbors and basic parameter.
Submitting daily progress KPI improvement report to the customer.
Monitor & analyze the LTE & GSM Radio Network Statistics on daily basis.
Responsible for reducing congestion and drops, improving CSSR and HOSR.
dealing professional with the radio parameters to improve the KPIs.
Responsible for the drive test and Layer 3 analysis and taking the necessary action to improve the performance.
Responsible for testing the radio performance for the newly integrated sites.
Responsible for monitoring BSC, BTS and e-NB alarms, checking inconsistencies and discrepancies in adjacency, non-symmetrical adjacency, handover synchronization, non-unique CI and LAC and frequency and administrative states of the objects in network.
Performed cluster optimization as per agreed KPIs.
Troubleshooting coverage, signal quality, low throughput, and handover failure by adjusting antenna azimuth, tilt or Hight, BTS transmit power, and define neighboring cells.
Managed network traffic.
Design an OPT Tools by VBA code to get all site info and generate the scripts Automatically.
RF Post processing Engineer
Analyzed RSRP/SINR/PCI distribution diagrams to determine areas with weak coverage, coverage holes, cross coverage, lack of dominant cell, poor signal quality, UL/DL imbalance, and swapped sectors.
Provided technical support for DT teams and prepared analysis and recommendations report for customer review.
Performed cluster optimization as per agreed Radio Condition.
Prepare analysis and recommendations report for the customer review including plots and diagrams prepared in TEMS Discovery.
RF Post processing Engineer
RF-P. P Team leader and DT teams’ coordination on MTN MS project.
Handling SSV and site survey Acceptance and Customer interface.
Preparing SSV, weekly and monthly reports by using Genex Probe and Assistant.
Detection the problems and giving recommendations to solve it.
RF Drive test engineer
Main duties include for testing the mobile network (2G, 3G or 4G) Data collection, analysis, detection the problems and Reporting.
Finally giving recommendations to customer for enhancing optimization of network.
Drive test engineer trainee
Performing SSV test project of LTE Network like: rounds test (DL and UL), stationary tests (DL, UL, ping, attach, CSFB) and H.O tests.
analysis of the collected data and discover problems.
Site engineer trainee
Main duties include for installation of site (2G, 3G or 4G) and microwave link (traffic note) and site survey.