Water Plant Operator II Night

Position SummaryThe Water Plant Operator II performs plans and organizes the operation maintenance and monitoring of water facilities and associated systems including but not limited to raw water intakes flocculation/sedimentation basins solids handling filtration related facility structures SCADA and pump stations; performs a variety of work assignments to ensure acceptable asset condition water quality and health and safety standards are met or exceeded; and performs and/or supervises related work as required to ensure efficient and effective facility ResponsibilitiesWorks collaboratively with supervisory personnel and other operators to assure optimal process efficiency proper monitoring and regulatory compliance for the water treatment plant including related subsystems and the treatment process from the control board/computer screen and visual observations; monitors various treatment processes including coagulant feed rapid mix flocculation sedimentation filtration and disinfection including; monitors the addition of chemicals added for corrosion control and secondary water quality ensuring parameters are within compliance by performing laboratory tests at various stages in the treatment process including tests for chlorine residual fluoride residual chlorite residual pH turbidity hardness alkalinity ozone odors and other tests as necessary to maintain water quality; calibrates laboratory equipment; maintains laboratory chemical dosage and makes adjustments to plant processes as necessary including for ferric sulfate chlorine ammonia sodium hydroxide ozone chlorine dioxide and other gauges and meters; interprets data to maintain the proper treatment process proper transmission system operation security and alarm status; makes flow pumps and valves and chemical systems utilizing a SCADA system; backwash filter either through SCADA or manual control monitors systems for alarms make adjustments and provides appropriate response; notifies water stand-by or other personnel as necessary to respond to mechanical equipment including pumps and motors chemical feed pumps and systems air compressors and manual electrical and pneumatically operated valves; operates hand and power tools; operates a light chlorination equipment related to the chlorine and chlorine dioxide feed system; assist in performing maintenance on chemical systems including chemical piping system; participates in calibration of chemical feed in maintaining chemical inventories; takes delivery of bulk chemicals and monitors unloading processCreates service request related to plant operations and maintenance activities utilizing the CMMS (Maximo) to coordinate with personnel and support thorough operational logs and records. Uses these records to improve the function and efficiency of various visual inspections; monitors facilities and roads to insure adequate preventative and predictive maintenance on treatment plant equipment; assists specialized trades personnel in making major and/or specialized repairs to equipment; coordinates work of contractors and of other trains to operate the transmission system including reservoirs and pump stations; ensures adequate availability and pressure to all delivery points;Provides appropriate response to emergencies and spills including those involving hazardous materials; wears respirators including self-contained breathing apparatus as safety guidelines as required by State statutes and as prescribed by the NTMWD. This includes identifying and mitigating safety hazards as well as assisting in the implementation of safety and adhere to applicable NTMWD policies and procedures. May assist in training new other duties as RequirementsEducation & Experience:Possess a high school diploma or GED (an associate degree or trade certification is preferred).Possess two (2) years of experience in water treatment or a suitable combination of directly relevant education and experience as determined by a Texas Commission on Environmental Quality (or predecessor agency) Class C Water Treatment Operators Skills & Abilities:Must maintain knowledge of water treatment processes compliance requirements operations and maintenance requirements and reporting/record keeping requirements; including the ability to troubleshoot water treatment equipment and processes and be knowledgeable with performing water quality tests and interpreting obtain water treatment chemical safety and response procedures include hazardous materials training for chemical safety communicate effectively both written and verbally with supervisors peers to convey basic computer skills and electrical and mechanical and Physical Working ConditionsDriving a District vehicle for business may be required. Employees required to drive as part of their job duties are responsible for maintaining a current valid and vehicle - appropriate driver s license of their resident duties and responsibilities are generally performed in a water treatment environment. The position involves sitting frequent standing frequent walking light to heavy lifting (up to 50 lbs.) light carrying frequent bending and reaching keyboarding and telephone operation. It often requires an irregular work schedule and overtime hours. Specific physical conditions require frequent work with chemicals tools machinery moving mechanical parts duties and responsibilities are performed both indoors and outdoors. Moderate to heavy exposure to sun dirt dust pollen odors wetness humidity biological hazards rain temperature and noise extremes hazardous materials and chemicals machinery moving mechanical parts vibrations electric currents traffic hazards and water hazards are common. Performs and reviews work at locations that involve hazardous environments requiring the physical ability to wear and work using personal protective equipment (PPE) that meet or exceed guidelines such as established by OSHA which may result in some physical discomfort due to temperature dust odors chemicals and noise. The position may require work in confined spaces on ladders and rooftops and in adverse weather conditions with appropriate physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this to pass annual medical evaluation and receive certification to utilize respiratory protection equipment where required by work assignment post-employment offer. Must meet shaving requirements for respiratory fit test at all be able to pass hazardous materials medical examination and test for post-employment offer (applicable only to those on Hazardous Response Team)Perform functions requiring manual dexterity and precision movements continuous or repetitive arm and hand movements grasping movements and occasional forceful colors or shades of colors sounds odor depth and visual cues or visual and muscular dexterity to operate a motor vehicle (including while towing portable equipment) equipment hand tools and a computer.