Owner's Engineer Commissioning Manager

1. Role Description

The role of Owners Engineer (OE) Commissioning Manager for the onsite commissioning scope of services which include but are not limited to:

• Support the development and review of commissioning plans procedures method statements punch lists and handover documentation to facilitate the successful transition of the facility into commercial operation.
• Attend and actively participate in site inspections technical meetings commissioning workshops and progress review meetings.
• Review and assess installation testing commissioning and quality documentation prior to commissioning and testing activities to confirm compliance with project requirements and acceptance criteria.
• Conduct routine site inspections to verify construction quality commissioning readiness system completion status and compliance with approved procedures.
• Verify compliance of installed works testing procedures and commissioning activities with approved designs technical specifications contractual requirements applicable standards and industry best practices.
• Provide on-site technical oversight and support throughout the testing and commissioning phase from pre-commissioning testing through to energisation grid connection performance testing and final handover to the Operations and Maintenance (O&M) team.
• Coordinate commissioning activities between Contractors Suppliers and other stakeholders facilitating the timely investigation resolution and close-out of technical and commissioning-related issues.
• Monitor and assess the implementation of commissioning-related Quality Assurance (QA) and Quality Control (QC) processes by the Balance of Plant (BoP) and Turbine Supply and Installation (TSI) Contractors to ensure compliance with project requirements.
• Witness monitor and provide technical oversight of testing and commissioning activities associated with the Low Voltage (LV) Medium Voltage (MV) High Voltage (HV) and control systems including the integration and interfacing of plant systems. The role may also require support to other engineering disciplines and installation activities where necessary.
• Witness and evaluate Site Acceptance Tests (SATs) and commissioning tests on behalf of the Owner for wind turbines portable transformer stations (PTKs) SCADA systems Power Plant Controller (PPC) systems substation equipment and associated plant infrastructure including the review of technical reports and test records.
• Monitor project progress during the commissioning phase providing regular updates to the Owners Engineer and Owner (Client) management team and escalating risks delays non-conformances and technical issues as required.
• Maintain accurate records of daily activities observations inspections non-conformances technical queries requests for information (RFIs) and commissioning concerns for reporting and close-out purposes.
• Where appropriate and relevant to commissioning and testing activities report health safety and quality concerns to the HSE Manager and Owners Engineer and Owner (Client) management team.
• Provide independent technical advice and recommendations to the Owners Engineer team regarding commissioning performance system readiness defect resolution and achievement of contractual milestones.

Further requirements for the role are as follows:

• Full-time involvement on the project site aligning with the general working time conditions of both contractors and project stakeholders and ensure that they participate in all critical or milestone activities as per the schedule. The Owner and contractors will endeavour to plan & manage key activities within normal working hours but for activities on the project critical path some deviations and exceptions are expected and cannot be avoided as this could jeopardise the project schedule.
• Pay weekends Rest and recuperate (R&R) public holiday adjustments and builders breaks are subject to the Project Calendar and agreed-to onsite working arrangements. Any additional time-off must be agreed to by the Owner (Client) Site Manager the OE Site/QC Manager and the OE Project Manager.
• The Employee/Representative will be required to spend time in the site office as well as walking/driving around site performing construction monitoring duties and attending and recording inspections. It is expected that the Employee/Representative has an adequate fitness level to undertake this role.
• All onsite OE staff shall report directly to the OE Site/QC Manager and the OE Project Manager. The OE Site/QC Manager shall report to the Construction Director (Owner appointed) during construction and take direction and instruction from the CD for the duration of their appointment. Direction may also be given by the Owners Project Director or Owners Site Manager.
• The Employee/Representative will be required to wear the applicable PPE and adhere to the Owner and/or Contractor HSE requirements whilst on site.
• All on-site staff should have a good command of English.
• All onsite staff should have the correct base qualifications certifications and registrations required for the role they shall be performing.
• Working space and facilities (offices printing potable water toilets and internet access) on-site shall be provided by the Owner.

2. Personal attributes:

• Proactive
• Practical
• Analytical
• Diligent
• Good technical report writing skills
• Ability to work under project execution related pressure

3. Candidate specification:

The following specifications apply:

• National Diploma BTech Advanced Diploma BEng/BSc Eng Electrical Engineering.
• Minimum 15 years experience specifically with:

1. Practical commissioning experience
2. HV switching
3. Protection relay testing
4. Energisation procedures
5. SCADA commissioning
6. Grid compliance testing

• Professional Registration preferred.
• Extensive technical knowledge in the power transmission renewable energy and infrastructure sectors.