PCC Talent Acquisition Portal

Position Summary:The Director of Operations is responsible for leading and executing all aspects of manufacturing and operational performance at Carlton Forge Works. This role has full accountability for safety quality delivery productivity cost and employee engagement across forging

Position Summary:The Director of Operations is responsible for leading and executing all aspects of manufacturing and operational performance at Carlton Forge Works. This role has full accountability for safety quality delivery productivity cost and employee engagement across forging

This position is hiring for weekend shift Friday-Sunday.SUMMARYThe Wax Outsource Inspector ensures all parts are inspected and met the quality requirements before the product is delivered to the customer.JOB DUTIESPerforms inspection on cleaning wax vanes/struts and final assemblies.

This position is hiring for weekend shift Friday-Sunday.SUMMARYThe Wax Outsource Inspector ensures all parts are inspected and met the quality requirements before the product is delivered to the customer.JOB DUTIESPerforms inspection on cleaning wax vanes/struts and final assemblies.

The Chemline Operator must be able to perform all etch autoclave and laboratory operations with focus on quality productivity and safety.Specific Duties:Support SOP and EP compliance for etch and autoclave solution controls (solution testing). Periodically review documents and make ch

The Chemline Operator must be able to perform all etch autoclave and laboratory operations with focus on quality productivity and safety.Specific Duties:Support SOP and EP compliance for etch and autoclave solution controls (solution testing). Periodically review documents and make ch

MISSION:Supervise hourly employees in the safe manufacture of company products satisfying all quality and productivity requirements in the most cost-effective manner. This position reports to either a Production Manager II or Area Manager. Incumbent(s) may be required to work with haz

MISSION:Supervise hourly employees in the safe manufacture of company products satisfying all quality and productivity requirements in the most cost-effective manner. This position reports to either a Production Manager II or Area Manager. Incumbent(s) may be required to work with haz

Position Summary:This role is primarily focused on the introduction of new product and improvements in the introduction process from customer through first-time this role the employee will have ownership over the introductory process within the engineering team will work with sales

Position Summary:This role is primarily focused on the introduction of new product and improvements in the introduction process from customer through first-time this role the employee will have ownership over the introductory process within the engineering team will work with sales

Primary Duties and Responsibilities: Contribute to the development of the organizations strategic plans and objectives. Drive division H&S strategy by creating an H&S plan to meet organizations objectives. Act as a strategic business partner change agent and member of the line managem

Primary Duties and Responsibilities: Contribute to the development of the organizations strategic plans and objectives. Drive division H&S strategy by creating an H&S plan to meet organizations objectives. Act as a strategic business partner change agent and member of the line managem

Schedule: Tuesday - Saturday 5am - 1:30pmIf you have experience as a certified X-Ray Technician Level II apply for this role to continue your career in the exciting field of Non-Destructive Testing. The X-Ray Technician Level II is responsible for reviewing both digital images and fil

Schedule: Tuesday - Saturday 5am - 1:30pmIf you have experience as a certified X-Ray Technician Level II apply for this role to continue your career in the exciting field of Non-Destructive Testing. The X-Ray Technician Level II is responsible for reviewing both digital images and fil

General ManagerPosition SummaryThe General Manager is responsible for driving profitability by leading plant operations developing people and executing strategies that achieve PCCs business objectives. This role ensures high levels of customer and employee satisfaction while continuou

General ManagerPosition SummaryThe General Manager is responsible for driving profitability by leading plant operations developing people and executing strategies that achieve PCCs business objectives. This role ensures high levels of customer and employee satisfaction while continuou

Position Summary:At the direction of the Quality manager quality inspectors train to develop the ability to use predetermined methods operations setups and prescribed specifications to perform in-process and completed inspection of products such as machined parts mechanical assemblies

Position Summary:At the direction of the Quality manager quality inspectors train to develop the ability to use predetermined methods operations setups and prescribed specifications to perform in-process and completed inspection of products such as machined parts mechanical assemblies

Core Schedule: Tuesday - Saturday 1:30pm - 10pmTraining for this position will be on DAY SHIFT Monday - Friday: 5:00am-1:30pmCompensation also includes 2nd shift differential of 4.5% and a Quarterly Incentive Bonus Overtime OpportunitiesUnder general supervision inspects the surface

Core Schedule: Tuesday - Saturday 1:30pm - 10pmTraining for this position will be on DAY SHIFT Monday - Friday: 5:00am-1:30pmCompensation also includes 2nd shift differential of 4.5% and a Quarterly Incentive Bonus Overtime OpportunitiesUnder general supervision inspects the surface

Level two thread/form roll operators work under minimal supervision to operate and perform basic setups of thread/form roll machines such as feeding systems on Warren Waterbury EWM Roy Hartford platforms. Basic familiarity with thread/form roll tooling. This role requires intermediate

Level two thread/form roll operators work under minimal supervision to operate and perform basic setups of thread/form roll machines such as feeding systems on Warren Waterbury EWM Roy Hartford platforms. Basic familiarity with thread/form roll tooling. This role requires intermediate

Primary Duties and Responsibilities: Contribute to the development of the organizations strategic plans and objectives. Drive division H&S strategy by creating an H&S plan to meet organizations objectives. Act as a strategic business partner change agent and member of the line managem

Primary Duties and Responsibilities: Contribute to the development of the organizations strategic plans and objectives. Drive division H&S strategy by creating an H&S plan to meet organizations objectives. Act as a strategic business partner change agent and member of the line managem

Position Summary:At the direction of the Quality manager quality inspectors train to develop the ability to use predetermined methods operations setups and prescribed specifications to perform in-process and completed inspection of products such as machined parts mechanical assemblies

Position Summary:At the direction of the Quality manager quality inspectors train to develop the ability to use predetermined methods operations setups and prescribed specifications to perform in-process and completed inspection of products such as machined parts mechanical assemblies

General ManagerPosition SummaryThe General Manager is responsible for driving profitability by leading plant operations developing people and executing strategies that achieve PCCs business objectives. This role ensures high levels of customer and employee satisfaction while continuou

General ManagerPosition SummaryThe General Manager is responsible for driving profitability by leading plant operations developing people and executing strategies that achieve PCCs business objectives. This role ensures high levels of customer and employee satisfaction while continuou

MISSION:Supervise hourly employees in the safe manufacture of company products satisfying all quality and productivity requirements in the most cost-effective manner. This position reports to either a Production Manager II or Area Manager. Incumbent(s) may be required to work with haz

MISSION:Supervise hourly employees in the safe manufacture of company products satisfying all quality and productivity requirements in the most cost-effective manner. This position reports to either a Production Manager II or Area Manager. Incumbent(s) may be required to work with haz

Schedule: Tuesday - Saturday 5am - 1:30pmIf you have experience as a certified X-Ray Technician Level II apply for this role to continue your career in the exciting field of Non-Destructive Testing. The X-Ray Technician Level II is responsible for reviewing both digital images and fil

Schedule: Tuesday - Saturday 5am - 1:30pmIf you have experience as a certified X-Ray Technician Level II apply for this role to continue your career in the exciting field of Non-Destructive Testing. The X-Ray Technician Level II is responsible for reviewing both digital images and fil

The Chemline Operator must be able to perform all etch autoclave and laboratory operations with focus on quality productivity and safety.Specific Duties:Support SOP and EP compliance for etch and autoclave solution controls (solution testing). Periodically review documents and make ch

The Chemline Operator must be able to perform all etch autoclave and laboratory operations with focus on quality productivity and safety.Specific Duties:Support SOP and EP compliance for etch and autoclave solution controls (solution testing). Periodically review documents and make ch

Level two thread/form roll operators work under minimal supervision to operate and perform basic setups of thread/form roll machines such as feeding systems on Warren Waterbury EWM Roy Hartford platforms. Basic familiarity with thread/form roll tooling. This role requires intermediate

Level two thread/form roll operators work under minimal supervision to operate and perform basic setups of thread/form roll machines such as feeding systems on Warren Waterbury EWM Roy Hartford platforms. Basic familiarity with thread/form roll tooling. This role requires intermediate

Core Schedule: Tuesday - Saturday 1:30pm - 10pmTraining for this position will be on DAY SHIFT Monday - Friday: 5:00am-1:30pmCompensation also includes 2nd shift differential of 4.5% and a Quarterly Incentive Bonus Overtime OpportunitiesUnder general supervision inspects the surface

Core Schedule: Tuesday - Saturday 1:30pm - 10pmTraining for this position will be on DAY SHIFT Monday - Friday: 5:00am-1:30pmCompensation also includes 2nd shift differential of 4.5% and a Quarterly Incentive Bonus Overtime OpportunitiesUnder general supervision inspects the surface

Position Summary:This role is primarily focused on the introduction of new product and improvements in the introduction process from customer through first-time this role the employee will have ownership over the introductory process within the engineering team will work with sales

Position Summary:This role is primarily focused on the introduction of new product and improvements in the introduction process from customer through first-time this role the employee will have ownership over the introductory process within the engineering team will work with sales