Role Overview
Lead the design integration and delivery of telecommunication and ICT systems for High-Speed Rail (HSR) assets including stations depots stabling yards OCC/CC and associated facilities. The role covers fixed and wireless communications transmission networks passenger information public address time synchronization and integration with rail operational systems and critical building systems
Key Responsibilities
- Lead end-to-end design integration and delivery of telecom/ICT systems for HSR assets including stations depots/stabling yards OCC/CC back-of-house buildings and corridor-wide communications.
- Develop Basis of Design (BoD) system architecture and design deliverables (concept to detailed design) for telecom systems including as applicable:
- Transmission/backbone networks (fiber backbone OTN/MPLS/IP/WAN) station LAN OCC networks
- Structured cabling (copper/fiber) containment/pathways telecom rooms (MDF/IDF) racks/ODF patching and labeling philosophy
- Radio communications (TETRA/DMR LTE/5G GSM-R / FRMCS-ready concepts where required) indoor/outdoor coverage planning; tunnel communications concepts such as leaky feeder where in scope
- Telephony / VoIP (SIP/VoIP hotline/emergency phones help points)
- Wi-Fi (public and operational) staff mobility solutions (if required)
- Passenger Information / CIS (PIDS) and Public Address / Voice Alarm (PA/VA) interfaces zoning and priority philosophy
- Master Clock / Time Synchronisation (GPS receivers NTP/PTP distribution) for event correlation and operational systems
- Telecom-side integration considerations for CCTV/Security transport (in coordination with Security Systems)
- Produce and coordinate design outputs: system schematics single line diagrams network block diagrams device layouts telecom room layouts equipment schedules BOM duct/fiber routing plans and interface matrices.
- Perform/coordinate network sizing and capacity engineering: bandwidth QoS latency/jitter considerations (voice) multicast where relevant IP addressing concepts PoE budgets (where applicable) storage/transport assumptions for video and operational applications.
- Define resilience and redundancy philosophy (ring/topology concepts N1 for critical nodes) failover expectations maintainability access spares strategy and O&M handover requirements.
- Manage interfaces with OCC/CC operations and other rail systems: define segregation between corporate IT / operational networks / security networks and document interfaces to SCADA BMS/EMS signaling power maintenance systems AFC (if applicable).
- Coordinate with Architecture (public area coverage rooms/data sheets) MEP (power/UPS loads HVAC requirements earthing/grounding fire interfaces) Civil/Structural (duct banks trenches mounting) and BIM teams to ensure spatial coordination and clash-free design.
- Prepare technical specifications Employers Requirements / performance specs compliance matrices and support technical notes for authority submissions and stakeholder reviews (as applicable).
- Support procurement and vendor management: technical evaluations RFIs design reviews workshops and value engineering while protecting performance and operational requirements.
- Lead and/or review testing commissioning and integration documentation and activities: FAT/SAT network acceptance tests end-to-end service verification (voice radio coverage PIDS/PA functions time sync) and integration test plans.
- Apply project QA/QC and governance: ensure document control compliance traceability of assumptions and effective management of design change impacts on telecom architecture.
Qualifications :
Qualifications & Experience
- Bachelors in Telecommunication.
- 1214 years security systems design on large public/transport/critical facilities.
- Strong understanding of structured cabling network design interfaces and compliance processes.
Additional Information :
Software
AutoCAD Revit Visio; ACC. Strong competency in bandwidth/storage calculators and coordination tools (Excel schedules interface registers)
Remote Work :
No
Employment Type :
Full-time
Role OverviewLead the design integration and delivery of telecommunication and ICT systems for High-Speed Rail (HSR) assets including stations depots stabling yards OCC/CC and associated facilities. The role covers fixed and wireless communications transmission networks passenger information public ...
Role Overview
Lead the design integration and delivery of telecommunication and ICT systems for High-Speed Rail (HSR) assets including stations depots stabling yards OCC/CC and associated facilities. The role covers fixed and wireless communications transmission networks passenger information public address time synchronization and integration with rail operational systems and critical building systems
Key Responsibilities
- Lead end-to-end design integration and delivery of telecom/ICT systems for HSR assets including stations depots/stabling yards OCC/CC back-of-house buildings and corridor-wide communications.
- Develop Basis of Design (BoD) system architecture and design deliverables (concept to detailed design) for telecom systems including as applicable:
- Transmission/backbone networks (fiber backbone OTN/MPLS/IP/WAN) station LAN OCC networks
- Structured cabling (copper/fiber) containment/pathways telecom rooms (MDF/IDF) racks/ODF patching and labeling philosophy
- Radio communications (TETRA/DMR LTE/5G GSM-R / FRMCS-ready concepts where required) indoor/outdoor coverage planning; tunnel communications concepts such as leaky feeder where in scope
- Telephony / VoIP (SIP/VoIP hotline/emergency phones help points)
- Wi-Fi (public and operational) staff mobility solutions (if required)
- Passenger Information / CIS (PIDS) and Public Address / Voice Alarm (PA/VA) interfaces zoning and priority philosophy
- Master Clock / Time Synchronisation (GPS receivers NTP/PTP distribution) for event correlation and operational systems
- Telecom-side integration considerations for CCTV/Security transport (in coordination with Security Systems)
- Produce and coordinate design outputs: system schematics single line diagrams network block diagrams device layouts telecom room layouts equipment schedules BOM duct/fiber routing plans and interface matrices.
- Perform/coordinate network sizing and capacity engineering: bandwidth QoS latency/jitter considerations (voice) multicast where relevant IP addressing concepts PoE budgets (where applicable) storage/transport assumptions for video and operational applications.
- Define resilience and redundancy philosophy (ring/topology concepts N1 for critical nodes) failover expectations maintainability access spares strategy and O&M handover requirements.
- Manage interfaces with OCC/CC operations and other rail systems: define segregation between corporate IT / operational networks / security networks and document interfaces to SCADA BMS/EMS signaling power maintenance systems AFC (if applicable).
- Coordinate with Architecture (public area coverage rooms/data sheets) MEP (power/UPS loads HVAC requirements earthing/grounding fire interfaces) Civil/Structural (duct banks trenches mounting) and BIM teams to ensure spatial coordination and clash-free design.
- Prepare technical specifications Employers Requirements / performance specs compliance matrices and support technical notes for authority submissions and stakeholder reviews (as applicable).
- Support procurement and vendor management: technical evaluations RFIs design reviews workshops and value engineering while protecting performance and operational requirements.
- Lead and/or review testing commissioning and integration documentation and activities: FAT/SAT network acceptance tests end-to-end service verification (voice radio coverage PIDS/PA functions time sync) and integration test plans.
- Apply project QA/QC and governance: ensure document control compliance traceability of assumptions and effective management of design change impacts on telecom architecture.
Qualifications :
Qualifications & Experience
- Bachelors in Telecommunication.
- 1214 years security systems design on large public/transport/critical facilities.
- Strong understanding of structured cabling network design interfaces and compliance processes.
Additional Information :
Software
AutoCAD Revit Visio; ACC. Strong competency in bandwidth/storage calculators and coordination tools (Excel schedules interface registers)
Remote Work :
No
Employment Type :
Full-time
View more
View less