Electro-Mechanical Inspector – 18 Month Contract

SGS is currently looking for an Electro-Mechanical Inspector in Port Colbourne Ontario to start immediately.  The inspector would be working full time hours - 50 weeks a year 5 days a week (Monday to Friday 8 to 10 hours a day) and every other Saturday.

Scope of work:

Mechanical Checks:
Gasket verification check to see proper gasket type is used

• Torque checks - verify against our technical spec
• Insulation verification verify the thickness and type conform with our standard ensure all heat tracing is installed wherever there needs to be heat tracing
• Valve installation ensure proper valve is used at the locations per our PID and make sure they are orientated properly and installed correctly control cable & pneumatic lines or electrical depending on actuator type. Make sure each of the valves is appropriately tagged
• Hangers and supports verify the hangers and supports are the correct type and in the locations as shown in the drawings also make sure that they are supported at the minimum span shown in our tech spec.
• Documentation review Ensure we have documentation to ensure the pressure test was complete and flushing was done on each of the lines with TSSA sign off
• Belt tension check
• Fan pitch verification

Controls and Instrumentation:

• Verify each of the instruments are in the correct location and have appropriate tags
• Verify the instruments are calibrated and the parameters are suitable for the associated piping lines
• Verify that each of the valves actuate correctly
• CSA/CUL 

 Electrical:
 To go through the cable lists Electrical diagrams and motor lists and check the following;

• Megger check each of the motors
• Test each of the motors for rotation grounding and tagged
• Hi-pot and continuity test each of the lines
• CSA/CUL certification on each of the Panels & Motors

Qualifications :

• Red Seal Journeyman Electrician & CWB W178.2 Level II Welding Inspector Certification would be preferable
• Minimum of five (5) years industrial experience in Electro-Mechanical inspections. Experience in EV Battery inspection is preferable and advantageous
• Must be able to demonstrate knowledge of the battery inspections Motor testing familiar with CSA/CUL regulations familiar with Megger & Hi-pot tests.
• Must be able to read understand and follow work instructions in a safe accurate and timely manner.
• Candidates must be proficient in using several types of computer software (Word Excel. PowerPoint & Outlook).
• Candidates must demonstrate excellent verbal and written communication skills including grammar and composition.
• Proven time management skills and a strong attention to detail.
• Pay range is $40 to $45/hour depending on experience 0.70/KM.

Additional Information :

SGS is an Equal Opportunity Employer and as such we recruit hire train and promote persons in all job classifications without regard to race color religion sex national origin disability age marital status sexual orientation gender identity or expression and Indigenous status or any other characteristics protected by law.

To perform this job successfully an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge skills and/or abilities required.

This job description should not be construed as an exhaustive statement of duties responsibilities or requirements but a general description of the job. Nothing contained herein restricts the companys rights to assign or reassign duties and responsibilities to this job at any time.

Accommodations are available on request for qualified candidates during each stage of the recruitment process.

Please note that candidates applying for Canadian job openings should be authorized to work in Canada.

#IND

Remote Work :

No

Employment Type :

Contract