Building Engineer

Job Title

Building Engineer

Job Description Summary

This position supports the Assistant and/or Chief Engineer and Sr. Facilities Manager in the daytoday maintenance repair and efficient operation of all building systems and equipment on behalf of
the client. The Engineer will accurately and perform timely routine operation inspection maintenance and repairs all HVAC mechanical electrical and plumbing equipment and systems in assigned facilities to obtain the most efficient operating results and life expectancy. Can include HVAC boiler heating refrigeration water and energy systems to ensure the effective operation of the client facility.

Position assures that equipment is being maintained in an energy efficient and safe manner and downtime is reduced to a minimum by anticipation of necessary repairs and maintaining records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas including walls and flooring installed fixtures roofing systems lighting etc. The Engineer will perform at the highest of ethical standards reflecting the core values of C&W as
defined in its Business Code of Conduct Policies and Procedures Manual and other related company policies.

This is a nonsupervisory/ hourly / nonexempt role.

Job Description

Ensure ongoing preventive maintenance and repair work orders on facility mechanical electrical lighting and other installed systems equipment and other components.

Maintain operate and repair all HVAC systems and associated equipment electrical distribution equipment plumbing systems building interior/exterior repair and related grounds as it pertains to assigned client buildings.
Performs major HVAC repairs including compressor replacement condenser replacement evaporator coil replacement condenser coil replacement etc.
Performs major plumbing replacements including domestic water piping steam trap repairs sewage line repairs bathroom fixture repairs etc.
Perform electrical repairs including running and bending conduit piping pulling cables performing electrical panel maintenance electric motor maintenance and predictive maintenance using a megar on said motors and compressors.
Perform assigned facility inspections and due diligence efforts reporting on asfound conditions impacting satisfactory client occupancy and operations.
Respond effectively to all emergencies. May require light travel during emergency events.
Operation maintenance and repair of all boilers heaters pumps valves and lines used in the distribution of steam and heated or processed water.
Operation maintenance and repair of refrigerant compressors condensers evaporators traps transfer pumps expansion valves stop valves and float valves together with all refrigerant lines and devices used to control temperature and air conditioning systems in their entirety.
Operation maintenance and repair of pumps handling water or other secondary refrigerating liquids together with all valves appurtenances and lines used in the system.
Operation maintenance and repair of air compressors together with distribution lines and all valves and devices for air control.
Operation maintenance and repair of water filters softeners piping and pumps used in conjunction with water distribution including all sinks and toilet bowls including all supply lines drains water lines control devices and sprinkler systems.
Operation maintenance and repair of all types of electrical motors and engines used to power pumps compressors and fans.
Maintenance of elevators except where this type of equipment is serviced and maintained by specialized contractors.
Operation maintenance and repair of building automation systems for HVAC including consoles data gathering panels remote sensors and indicating devices.
Operation maintenance and repair of sanitary sewer systems and sump pumps including basins water closets urinals and piping.
Maintenance and repair of trash compactors including electrical and hydraulic systems.
Maintenance and repair of all kitchen equipment excluding tenant owned equipment.
Maintain stock and inventory control.
Recommend improvements to the preventive maintenance program on an ongoing basis.

Ensure the management team is informed of current building operations by compiling and submitting monthly reports.

Study and become familiar with the various items of equipment for assigned client locations and the methods required to use them properly to ensure required ongoing daily client activities. To include building automation systems fire/life safety systems and any other buildingrelated equipment as needed.

Recommend improvements to the preventive maintenance program on an ongoing basis.

Recognize danger and safety hazards and propose methods to
eliminate them or use the correct PPE in performing the task needed.
Comply with all applicable codes regulations governmental agencies and company directives related to building operations and practicing safe work habits.

Respond effectively to all emergencies. May require light travel during emergency events.

Must maintain all Federal State or Local licenses required for locations assigned.

Complete all required CW Safety Training as scheduled annually.

Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance during all working hours.
General Maintenance may include but is not limited to:

a) Repairs on toilet facilities including soap dispensers.
b) Repairs on registers and radiators.
c) Replacement of lamps and cleaning of light fixtures.
d) Removing ceiling tile.
e) Minor repairs on furniture and floors.
f) Maintaining and/or replacing door hardware.
g) Repair of floor maintenance equipment and Venetian blinds.
h) Maintenance painting in equipment rooms cooling towers and other building facilities.
i) Assist in the replacement of filters in the HVAC equipment.
j) General cleaning in mechanical spaces and perimeter inductions units
k) Cleanup of equipment in the engine room and shop
l) Miscellaneous handyman work requires the limited use of hand tools.
m) Replace fire extinguishers when needed

n) Must maintain all Federal State or Local licenses required for locations assigned.

Other assigned operational tasks may be typically expected of the Building Engineer role.

KEY COMPETENCIES
Communication Proficiency (oral and written)

Organization Skills

Technical Proficiency

Problem Solving/Analysis
Sense of Urgency

Related requirements

Any combination of education and experience that would provide the required knowledge and abilities is qualifying. A typical way to obtain knowledge and abilities would be:

Education
A High School Diploma or GED Equivalent is required. Graduate of an apprentice program or trade school preferred is preferred.

Years of Relevant Experience
Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of HVAC equipment and systems plumbing electrical equipment repair and maintenance and overall system design and application as referenced above.

Licenses or Certifications
Candidate must possess and maintain a valid state drivers license.
Based on location appropriate license/permit for trade as may be required i.e. Journeyman or Master Electrician License City License Operators License Steam Engineers License etc.
Possess a valid Universal level certification for CFC and HFCbased refrigerants (EPA Section 608); to service repair or dispose of equipment that could release

Knowledge Skills & Abilities
Experience in operation maintenance and basic repair of HVAC boilers heaters pumps refrigerant systems compressors gas lines water systems and the like.
Knowledgeable in energy management systems techniques and operations.
Thorough knowledge of all building systems operations maintenance and repair.
Excellent interpersonal skills in dealing with tenants clients and vendors.
Basic Computing Skills in Outlook Excel & Word including proficiency in the operation of smartphone and/or iPad/tablet uploading .pdf files and documents and logging into conference meetings (e.g. BlueJeans Teams Meetings Zoom).

Physical Work Requirements
The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions:

Environment: This job operates in a professional office or commercial building environment. This role routinely uses standard office equipment such as computers phones photocopiers filing cabinets and fax machines. Work could any combination of:

Almost constant exposure to loud noise includes the use of power equipment and unusual elements such as extreme temperatures toxic chemicals biohazardous materials dirt dust fumes smoke and/or loud noises.
Ability to perform work wearing Personal Protective Equipment (PPE) if required
May require regular travel outside between properties in varying weather conditions.

Physical: Considerable physical activity. Ability to stoop stand climb frequently lift a minimum of 50 lbs. of equipment (pumps tools ladders) and safely install rigging/lifting devices. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine. May involve movement between departments floors and properties to facilitate work. Should maintain the ability to speak clearly so others can understand you as week as the ability to
read and understand the information presented orally and in writing.

Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents. Regularly required to utilize vision abilities allowing reading of printed material drawings and schematics.

Hearing: Hear in the normal audio range with or without correction.

Scheduling
Most schedules work typical business hours based on location assigned.
Based on client need the role could be scheduled as the only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or oncall duties and over time.
Must be willing and able to support afterhours/weekends buildingrelated activity as required. The role may be assigned and must be able to respond to client callbacks for regular repair and/or emergencies events.
Based on location assigned schedules could be assigned as first second or third shift schedules assigned.

Other Duties
This job description is not designed to cover or contain a comprehensive list of activities duties or responsibilities that are required of the employee. Other duties responsibilities and activities may change or be assigned at any time with or without notice.

Conditions of employment
All offers of employment are contingent upon:

Legal Documentation establishing identity and eligibility to be legally employed in the US/United
States Citizenship
Drug Testing
Criminal background check
Clean DMV record (for related driving roles)
Education verification
Reference checks

AAP/EEO STATEMENT

C&W provides equal employment opportunity to all individuals regardless of their race color creed religion gender age sexual orientation national origin disability veteran status or any other characteristic protected by state federal or local law. Further the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

Cushman & Wakefield is an Equal Opportunity employer to all protected groups including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA) if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield please call the ADA line at or email. Please refer to the job title and job location when you contact us.

INCO: Cushman & Wakefield