Utility Systems Repairer-Operator

• Operation maintenance repair service troubleshooting of a wide range of highly complex and critical utility systems.
• Operation maintenance repair service troubleshooting of a wide range of highly complex and critical Building Automations stems.
• Knowledge and experience of boilers and chillers.
• Monitors operates and troubleshoots Fire Alarm Panels oxygen Nitrogen Medical Gas Panels Johnson Controls Metasys Extended Architecture Control system Johnson Controls PMI Control System Siemens Apogee Control System SCADA Emergency Power System.
• Operates and performs preventive maintenance installation operation monitoring troubleshooting and repairs to all fuel oil pumps needed top operate generators.
• Identifies and records electrical and mechanical statuses throughout the plant.
• Operating and monitoring all emergency power equipment including all generators and all switch gear related to emergency power.
• Has the ability and skill to interpret equipment schematics electrical circuit plans wiring diagrams and maintenance manuals.
• Reviews final plans and specifications for construction feasibility and practical Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions.
• Maintenance repair modification calibration and installation of all nonmedical electronic systems and components as a delegated responsibility located in the Central Energy Plant.
• Knowledge of all aspects of electrical systems and theory such as secondary power distribution lines and circuits used to supply a wide range of voltage amperage phase and frequency requirements to distribution panels switchgear power and control circuits. Incumbent performs preventative maintenance installations operation monitoring troubleshooting and repairs which include: switchgear SCAOA ATS controls load bank equipment pumps regulators governors and electrical panels.
• Ability to interpret values and meaning represented by gauges meters and other measuring scales that indicate temperatures pressures and like devices in the field and through the automated Graphic Control Center using the Energy Management Computer System.
• Experience with controlling air handlers hot water reheat system and chilled water systems.
• Experience with maintenance and repair of Boilers Systems Chillers Systems Natural Gas System Steam and Chill Water Distributing System Fuel Oil System Fire Alarm System Medical Gas System Elevator System.
• Experience with charging systems with proper refrigerants.
• Experience with Boilers pumps condensate tanks deaerator tank valves and steam piping.
• Ability to monitors operates and troubleshoots Fire Alarm Panels Oxygen Nitrogen Medical Gas Panels Johnson Controls Metasys Extended Architecture Control System Johnson Controls PMI Control System Siemens Apogee Control System SCADA Emergency Power System Medical Air and Dental Vacuum Systems and Air Compressors 24 hours a day 7 days a week and 365 days a year.

Work Schedule: Rotating Shift including holidays and weekends 0730am-16:00pm 16:00pm-23:30pm 00:00am 0-08:30am subject to change based on the needs of the facility.
Position Description Title/PD#: Utility Systems Repairer-Operator/PD07646A
Physical Requirements: May frequently work in hot humid confined spaces around equipment and systems associated with facilities.
Must climb ladders bend crouch. stoop and endure prolonged periods of standing and walking. Must lift parts and supplies weighing up to 40 pounds. Must be physically fit as work involves lifting pulling climbing crawling working with hands over head working in confined areas and using arm and back muscles. Must possess ability to be on feet for long periods either standing walking working off ladder or staging materials and lifting equipment. Frequently handle objects weighing up to 50 pounds and occasionally moves objects weighing 50 to 100 pounds with assistance and /or use of carts. They are required to push pull reach walk or stand crawl knee bend stoop and work in cramped positions for sustained periods of time. They must exercise normal care and practice all safety regulations during the performance of duties to prevent injury.

Working Conditions: May be required to to work in areas of high temperature cold temperature constant noise chemical fumes dirt soot rotating equipment oil grease. work is performed inside and outside sometimes in bad weather wet cramped locations; is frequently exposed to the possibly of cuts and bruises toxic fumes gases and acids. assist in other crafts within the engineering services.

• U.S. Citizenship; non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy.
• Suitable for Federal employment determined by a background investigation
• Selective Services Registration is required for males born after 12/31/1959
• Selected applicants will be required to complete an online onboarding process. Acceptable form(s) of identification will be required to complete pre-employment requirements ( Effective May 7 2025 drivers licenses or state-issued dentification cards that are not REAL ID compliant cannot be utilized as an acceptable form of identification for employment.
• Complete all application requirements detailed in the Required Documents section of this announcement.
• Must pass pre-employment physical evaluation
  

As a condition of employment for accepting this position you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public determining if your employment advances the public interest we may consider:

• your performance and conduct;
• the needs and interests of the agency;
• whether your continued employment would advance organizational goals of the agency or the Government; and
• whether your continued employment would advance the efficiency of the Federal service.

Upon completion of your probationary period your employment will be terminated unless you receive certification in writing that your continued employment advances the public interest.

To qualify for this position applicants must meet all requirements by the closing date of this announcement.

EXPERIENCE: A specific length of training and experience is not required but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge skills and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards.

SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements:

• Equipment Assembly Installation Repair
• Interpret Instructions Specifications (includes blueprint reading)
• Materials
• Measuring Instruments
• Technical Practices
• Use and Maintain Tools and Equipment

Experience refers to paid and unpaid experience including volunteer work done through National Service programs (e.g. Peace Corps AmeriCorps) and other organizations (e.g. professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies knowledge and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience including volunteer experience.

Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment.