Supervisory General Engineer

• Designs coordinates manages and administers facilities program. Plans and implements energy conservation measures.
• Performs facility inspections to identify safety construction and equipment deficiencies.
• Advises employees on performance requirements and expectations on their positions and performance progression. Conducts meetings and conferences with staff to explain work requirements answering technical questions.
• Coordinates major renovations and repair of existing facilities on a current and long-range basis.
• Reviews design drawings and specifications submitted by engineers architects and contractors.
• Has knowledge of Heating/Ventilation/Air Conditioning systems electrical plumbing and structural systems. Interprets RSMeans database to estimate cost.
• Collects all data for construction projects. Reviews submittals contact field inspectors surveyors and other representatives. Tracks utilities other energy and waste quantities and costs for the unit in a central database.

Selectee may be subject to a probationary period
ESEP appointees typically serve a two year trial period
U.S. Citizenship is required
Selective Service Registration is required for males born after 12/31/1959

This is a designated position covered by Public Law 101-630 requiring contact or control over Indian children. Due to this requirement the agency must ensure that persons hired for these positions have not been found guilty of or pleaded nolo contendere or guilty to certain crimes.

A one-year supervisory/managerial probationary period may be required upon selection/placement.

On-call hours or standby duty may be required. Physical Demands: Some work may require walking standing carrying light items such as papers books etc. Travel is required to attend meetings conferences to and from field locations.

Successfully pass the E-Verify employment verification check. To learn more about E-Verify including your rights and responsibilities visit will need to set up direct deposit so we can pay you.

Background Investigation Requirement:

This position requires the successful completion of a federal background investigation as a condition of employment.

A background investigation is a standard process used by the Federal Government to verify an individuals identity employment history education and other relevant information to determine suitability for Federal service.

Upon receipt of instructions applicants must complete all required background investigation forms within five (5) calendar days of issuance. Timely completion is critical to avoid delays in processing or a determination of unsuitability.

Applicants are strongly encouraged to prioritize this requirement and to maintain regular communication with their assigned Personnel Security Specialist throughout the process.

Financial Suitability Requirement:
This position requires a review of the applicants financial history as part of the personnel security and suitability determination. Applicants must demonstrate financial responsibility maintain good standing with creditors and satisfy all legal financial obligations prior to applying.

Individuals with substantial delinquent or unresolved financial obligations-including but not limited to delinquent federal or state tax liabilities defaulted federal student loans court-ordered fines or fees or child support arrears-may be deemed unsuitable for employment with the Indian Health Service (IHS).

To qualify for this position your resume must state sufficient experience and/or education to perform the duties of the specific position for which you are applying.

Experience refers to paid and unpaid experience including volunteer work done through National Service programs (e.g. Peace Corps AmeriCorps) and other organizations (e.g. professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

BASIC REQUIREMENT(S):

A. Degree: Engineering. To be acceptable the program must: (1) lead to a bachelors degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics such as optics heat transfer soil mechanics or electronics.

OR

B. Combination of education and experience -- college-level education training and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering and (2) a good understanding both theoretical and practical of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI) Engineer in Training (EIT)1 or licensure as a Professional Engineer (PE) by any State the District of Columbia Guam or Puerto Rico. Absent other means of qualifying under this standard those applicants who achieved such registration by means other than written test (e.g. State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example an applicant who attains registration through a State Boards eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States the District of Columbia Guam and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical mathematical and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field e.g. engineering technology physics chemistry architecture computer science mathematics hydrology or geology may be accepted in lieu of a bachelors degree in engineering provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence or several years of prior professional engineering-type experience e.g. in interdisciplinary positions. (The above examples of related curricula are not all-inclusive).

In addition to the Basic Requirements you must also meet the Minimum Qualifications stated below.

MINIMUM QUALIFICATIONS:
GS-13: Your resume must demonstrate at least one (1) year of specialized experience equivalent to at least the next lower grade level in the Federal service obtained in either the private or public sector performing the following type of work and/or tasks: Experience applying engineering principles concepts and practices to solve practical engineering problems with sound engineering judgment resourcefulness and intuitive planning. Experience in overseeing a diverse workforce including developing goals and objectives of a facility management program; preparing policies procedures and guidelines for implementing preventive and operations maintenance. Experience in serving as project manager for sustainability activities. Experience in reviewing architectural and engineering drawings for new building construction. Experience in performing administrative activities to effectively conduct a facilities management program.

Supervisory Work: Candidates should possess proficiency or the potential to develop proficiency in these competencies prior to entry into a supervisory position. Accountability: Holds self and others accountable for measurable high-quality timely and cost-effective results. Determines objectives sets priorities and delegates work. Accepts responsibility for mistakes. Complies with established control systems and rules. Customer Service: Anticipates and meets the needs of both internal and external customers. Delivers high-quality products and services; is committed to continuous improvement. Decisiveness: Makes well-informed effective and timely decisions even when data are limited or solutions produce unpleasant consequences; perceives the impact and implications of decisions. Flexibility: Is open to change and new information; rapidly adapts to new information changing conditions or unexpected obstacles. Integrity/Honesty: Behaves in an honest fair and ethical manner. Shows consistency in words and actions. Models high standards of ethics. Interpersonal Skills: Treats others with courtesy sensitivity and respect. Considers and responds appropriately to the needs and feelings of different people in different situations. Oral Communication: Makes clear and convincing oral presentations. Listens effectively; clarifies information as needed. Problem Solving: Identifies and analyzes problems; weighs relevance and accuracy of information; generates and evaluates alternative solutions; makes recommendations. Resilience: Deals effectively with pressure; remains optimistic and persistent even under adversity. Recovers quickly from setbacks. Written Communication: Writes in a clear concise organized and convincing manner for the intended audience.

Time In Grade
Federal employees in the competitive service are also subject to the Time-In-Grade Requirements: Merit Promotion (status) candidates must have completed one year of service at the next lower grade level. Time-In-Grade provisions do not apply under the Excepted Service Examining Plan (ESEP).

You must meet all qualification requirements within 30 days of the closing date of the announcement.