Preventive Maintenance Technician III Mobile, AL

ATTENTION MILITARY AFFILIATED JOB SEEKERS- Our organization works with partner companies to source qualified talent for their open roles. The following position is available toVeterans Transitioning Military National Guard and Reserve Members Military Spouses Wounded Warriors and their Caregivers. If you have the required skill set education requirements and experience please click the submit button and follow the next steps. Unless specifically stated otherwise this role is On-Site at the location detailed in the job post.


Job Description
REPORTS TO: Preventive Maintenance Supervisor

SUPERVISES: N/A
The primary objective of this position is to be the technical expert at the deck plate level helping prevent the failure of equipment and to preserve and enhance performance of equipment. Provides technical support and training to the level I and II while assisting the Supervisor in day-to-day operations. Ensures that preventive maintenance activities are completed according to defined schedules aimed at the prevention of breakdowns and failures. Preventive maintenance activities include equipment checks oil changes lubrication and so on. Ensures that PM activities including but not limited to making physical rounds of the ship(s) modules and warehouses are performed and completed in accordance established guidelines and policies.

AUTHORITIES / RESPONSIBILITIES:
Conducts preventive maintenance according to a schedule of planned maintenance actions aimed at the prevention of breakdowns and failures.
Works from limited documentation schematics diagrams notes production prints and layouts.
Establish a maintenance schedule then plan and conduct that maintenance IAW the established schedule.
Perform equipment checks oil changes lubrication and other preventive procedures.
Record equipment conditions including but not limited to deterioration and corrosion.
Follow established procedures manufacturers technical manuals instructions and pre-established guidelines to schedule plan and perform the functions of the job.
Ensure systems readiness for activation
Understanding of PM principles.
Offer guidance and mentorship to junior staff promoting development and knowledge sharing
Certificates/Security Clearances/Other
PHYSICAL REQUIREMENTS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.

While performing the duties of this job the employee is regularly required to stand walk use hands to manipulate handle or feel reach with hands and arms climb and balance stoop kneel crouch or crawl and talk or hear. The employee is occasionally required to sit.

Specific physical requirements include the following:

Must have the ability to bend squat stoop crawl and kneel.

Perform prolonged standing.

Ability to turn head from side to side and about the vertical axis.

Ability to turn body at the waist from side to side and about the vertical axis.

Lift/push/pull 50lbs to 75lbs on an occasional basis.

Lift/push/pull up to 20lbs on a frequent basis.

Must have the ability to climb in a safe manner (climbing as a minimum includes stairs scaffolding ladders and ramps).

Ability to work at heights above 12 while working from ladders scaffolding and/or man lifts.

Able to work at a variety of levels (ex. waist eye overhead).

Demonstrate the ability to safely and appropriately use required tools and equipment.

Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.

Possess sufficient handgrip and coordination to carry and operate tools and equipment.

Ability to utilize personal protective equipment (hard hat safety glasses steel- toes shoes goggles respirator safety harness safety line flotation gear etc.) safely per OSHA standards.

Ability to withstand cold and hot temperatures.


Ability to enter 18 x 36 openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead reaching out reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size shape temperature and texture by means of receptors in the hands and fingers.

Additional Qualifications/Responsibilities
QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:
Minimum of five (5) years maintenance/safety/mechanical/operational/install experience in a shipyard marine aerospace or offshore oil and gas environment required.
Maintenance training equivalent to two (2) years technical trade school or military technical school and/or Navy Coast Guard or Merchant Mariner experience will be considered in lieu of work experience
Current knowledge of OSHA Lockout /Tagout requirements and US Navy Work Authorization Form (WAF) procedures.
Internal hire Complete understanding of POSand 130.
Beginning knowledge of IFS.
External hire - Basic knowledge of CMS systems procedures in maintenance checks on high value equipment such as reduction gears propulsion diesels gas turbines.
Knowledge of ship equipment operations. Able to coordinate with assigned personnel to operate equipment to complete PM checks.
Demonstrated troubleshooting skills required.
Demonstrated understanding of shipboard equipment such as pumps motors diesels generators winches deck equipment and any other maintainable items.
Demonstrates ability to read and understand ship construction drawings and testing Procedures required.
Ability to make decisions that are safe and protective of expensive machinery.
Experience in ensuring equipment readiness for installation or operation and operation of marine equipment required.
Ability to read understand and fill out engineering logs required.
Good knowledge of shipbuilding processes and operational principles required.
Prior Navy Coast Guard or Merchant Mariner experience extremely beneficial.
TOOLS: Various

DIRECTION EXERCISED: None
DISCRETION EXERCISED: None

LIAISES WITH: Test and Activation Project Leads Production Leads.

ADDITIONAL GUIDELINES:
Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:

18 years of age or older at time of application
Able to provide proof of US Person Status
No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
No felony convictions of Drug crimes within three years from disposition date
Willing to submit to a drug screen
Willing to submit to a background check