Boilerhouse Refrigeration Operator I

• Maintains and promotes safe work practices at all times assures that safe work practices are being followed in all work groups and activelyparticipatesin safety programs.

• Perform assigned duties and responsibilities in a safe and satisfactory manner.

• Must understand andcomply withall known posted orgenerally acceptedinstructions procedures rules practicespoliciesor other items covered in the Employee Handbook.

• Required to pass a pulmonary/fit test annually (due to the use ofSCBA).

• Following established procedures such as SOPsperformsthe safe isolation shut down inspection cleaning adjustment repair/overhaul or startup of equipment and systems within scope of responsibility.

• Performs and documents line checks corrective maintenance and preventive maintenance including the lubrication and inspection of equipment to sustain equipment reliability.Documentation may include but is not limited to SAP Belt Tracking form FM form BDE cardetc...

• Records data such as temperature of equipment hours of operation fuel consumed temperature or pressure water levelsandanalysis of flue gases.Recordstank levels chemical and lubricant supplies. Records other readings in daily logs and sheets as assigned at the specified intervals to verify and assureoptimaloperating conditions.

• Is knowledgeable enough about the boiler and refrigeration systems tooptimizesystemsto helpoptimizeoperating and troubleshooting procedures.

• Competently evaluatesequipmentforperformance performs adjustments etc. as needed toassuresustainedoptimalequipment performance and the production of quality potato products.

• Maintainsoptimalequipment operation by tightening fittings repacking bearings replacing packing glands seals gaskets valves recorders gages and cleaning or replacing burners or other components.Troubleshoots repairs and welds equipment as needed to sustain reliable andoptimaloperations.

• Adjusts manual controls or overrides automatic controls to bring equipment into recommended or prescribed operating ranges switch to back-up equipment or systems or to shut down equipment.

• Is proficient in performingand documenting thetroubleshooting ofissues such as mechanicalelectricaland pneumatic toidentifydefectsidentifythe reason for the failuredetermineroot causeand to take corrective action toeliminaterecurring failure.

• Operates andmaintainswater conditioning systems. Performstests andadds chemicals and/or makes operational adjustments asindicatedby the testing procedures to protectoptimizeand sustain healthy steam and condensate systems.

• Performs most non-routine jobs assigned by Boiler & Refrigeration Maintenance Lead Maintenance Team Leader Team Leader Production or Plant Managementandcanperform repairs withminimaldirect supervision.

• Strongly encouraged to develop the knowledgeandskills necessary to advance from a1stClass Boiler & Refrigeration Operatorto a TechnicianBoiler & Refrigeration Operator.The three-part advancement test to the Technician level consists of 1)Weld test 2)Writtentestand 3)Hands-on validation of some advanced troubleshooting skills.

• If hired in or transferred in as 1stClass must be qualified toremain1stClass within 9 months after date of hireortransfer as 1stClassby passing the 1stClass test.Passinggradefor all written examinations must be 75% or better.

• Failure to passthistest will result in a minimum of30daysand a maximum of45 dayswaiting period before re-testing. Failure to passthesecond test will result in demotion toa2ndClass rating and pay scale.

• One more opportunity to pass the 1stClass test will be given within theremainderof the18 monthsof your hire or transfer date as a 1stClass. Failure to passthis testwill result in termination or reassignment outside the maintenance department.

OTHER JOB FUNCTIONS:

• Maintain 5Sstandards (Sort Set Systematize Shine and Sustain). Keep a neat clean orderlywork area.

• Follows instruction given verbally in work orders equipment manuals etc. Advises Team Leader and Planner of any inaccuracies found in work orders manuals schematics etc. and documents in SAP where applicable.

• Is proficient in the use ofSAP.Is fully capable ofutilizingSAP tolocateequipment and any data in SAP on equipment such as drawings schematics parts etc. as well as if the part is a stocked item in our plant Stores the quantity on hand and the bin location. Through the use of SAPiscapable of identifying any other plant that would have the item on hand.

• Providesaccuratedetailed information to Planner(s) of inaccuracies found in equipment BOMs or items needing added to equipment BOMs.

• Is capable of assistingStores personnel when needed toidentifyorlocateneeded equipment or parts in the secured Stores areas.

• Submits Notifications for deficiencies noted during the performance of tasks or through general observation that will improve and sustain reliability.

• Competently examines parts toidentifydefectsidentifyroot cause reason for the failure and to takeappropriate correctiveactionto sustainoptimalreliableand sustainable operation.

• Complete assigned workin a timely manner. If held over to cover an absence complete the assigned work of the absent team member. (Forexample if covering 4 hours of an 8-hour shift complete 4 hours of the absent team members assigned work.)Fully accounts for time worked (less breaks)utilizingthe CMMS system (SAP).

• Performs and properly documents the removal installation disassembly assembly and repair of plant components andequipmentasneeded to sustainoptimalreliableand sustainable operation.

• • Is responsible forthe troubleshooting replacement and re-wiring of electrical components beingreplaced.For example troubleshooting of a motor back to the MCC bucket and verifying that wires are properly torqued heaters/overloads and fuses are good and ifbadreplacing them (with the properly rated components) or changing rotation of a motor if.

  • Takescomparesand documents the motor amp-draw to the FLA rating of the motor

  • Repair orassistin repairsin other areas of the plantas instructed by the Maintenance Lead Maintenance Team Leader Team Leader Production or Plant Management.

  • Participates in and helps drive DMS (Daily Management System) and other miscellaneous programs as assigned.

  • Must be able to differentiate between stainless steel mild steel and aluminum materials andpossessthe knowledge todeterminetheappropriate applicationsand correct fabrication and welding process for each.

  • Is able to proficiently cut and bond materials together utilizing various processes such as but not limited to welding soldering bolting riveting screwing clip or caulking to fabricate repair or install materials and equipment to company specifications using verbal direction prints sketches diagrams and blueprints.

  • Is proficient in the use of hand tools power tools and testing or specialty equipmentnecessary to execute the duties associated with thisjob.(Test or specialty equipment includes but is not limited to multimeters meggers infrared and laser alignment tools.)

  • Is proficient inutilizingestablished procedures such as SOPs in the coaching of new or lower-class employees in the safest and proper way tooperateand maintain equipment.

  • Has the knowledge experience desire and communication skills to share learnings with fellow employees salaried team members and outside resources to improve collaboration to improve safety working relationships and equipment performance.Sharing ofthis knowledge may be in the form of one on one or potentially a classroom style setting.

  • Qualified to operate Powered Lift Trucks Scissor Lifts Man Lifts Snorkel Lifts and other equipment necessary to facilitate the execution of their various job functions including but not limited to the maintenance removal or placement of equipment and/or the materials supplies and tools associated with maintenance activities.

QUALIFICATION REQUIREMENTS:To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the skill and/or ability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PHYSICAL REQUIREMENTS:Based on an average 12-hour workday.