Denison Industries JOB DESCRIPTION | Job Title: FILM AND NON-FILM RADIOGRAPHY TECHNICIAN LEVEL ll | Employment Status: Full-Time | FLSA Status: Non-Exempt | Department: Quality Non- Destructive Testing | Position Reports To: Director of Quality/NDT Supervisor | Summary Description: Radiograph utilizing film and non-film processes and accept/reject aluminum castings. Direct or carry out tests in the method certified to the prescribed process specification. Set-up and calibrate equipment where applicable and interpret and evaluate results with reference to applicable codes standards and specifications. Apply familiarity with the scope and limitations for the method and apply detailed techniques to the parts within the limit of his/her qualifications. Organize and report test results and prepare written instructions. Use familiarity with the type and location of expected defects for the fabrication process used to make the parts and exercise assigned responsibility for on-the-job training and guidance of trainees and Level I personnel. | Essential Functions: - Align object on stand between source of x-rays and film
- Mask peripheral areas with lead shields
- Select type of film and determine exposure distance and time
- Verify radiation intensities
- Adjust controls of x-ray equipment on console to take radiograph
- Remove and develop film
- Monitor working area to protect personnel
- Mark defects appearing on film and assist in analyzing findings
- Set up and shoot castings using DDA Radiography equipment and techniques
- Perform required checks and calibrations to customer and industry specifications
- Investigate suspected discontinuities in castings using correct procedures and make accept/reject decisions based on those procedures
- Perform any and all other job related tasks as assigned
| Skills or Experience Required: Must have High School diploma or GED; Radiation Safety Card for the state of Texas (preferred); Level II Film Radiography (RT) certification; Level II Non-film Radiography (CR or DR) certification (preferred) must have 40 hours of formal training/1200 hours experience as a Level I on Radiographic Experience with Aerospace castings (preferred). | Other Position Demands or Requirements: Must be able to use the following machines tools equipment and/or work aids: RT: X-Ray Machines: Comet 160KV/22 XRG controller Comet 320/26 Ivario controller and Comet 320/11 MP1 controller; fully automatic Waygate NDT-U film processor; Penetrex High Intensity Dual Window FV-2014 viewer KOWOLUX X5 viewer; light meter; magnifying glasses 3X to 10X; penetrameters; lead screens; light tight vinyl cassettes; DT-300 densitometer; Fuji- Class I II and Class III safety films; DR: DDA Hardware: PiXS DR Custom Dual Robotic. PXS 320 / R-2 / 20. CR: Fuji DynamIx HR2 |
PHYSICAL JOB DEMANDS: ACTION | Weight | N/A | Occasional 1 - 33% | Frequent 34 - 66% | Constant 67 - 100% | | Max Avg | | | | | Pushing - Assisted | 50 | | | | | Pulling - Assisted | 50 | | | X | | Floor to Knuckle Lift | so | | | X | | Knuckle to Shoulder Lift | 50 | | | x | | Shoulder to Overhead Lift | | | | | | Carrying | | | | | | Sitting | | | | | | Standing | | | | | | Walking | | | | | | Climbing Stairs | | | | | | Sustained Bending | | | | | | Overhead Reaching | | | | x | | Crawling | | | | | | Squatting (Repeated) | | | | | | Kneeling | | | x | | | Stooping (Repeated Bending) | | | X | | | Crouching | | | X | | | Climbing Ladders | | | | | | Balancing | | | | | | Handling | | | | | X | Fingering | | | | | | Feeling | | | | | | Talking | | | | X | | Hearing | | | | x | | Tasting | | | | | | Smelling | | | | | | Near Acuity | | | | | | Far Acuity | | | | | | Depth Perception | | | | X | | Color Perception | | | | X | | Peripheral Vision | | | | | |
Repetitive motion Trip hazards High ambient temperatures & Head hazards | Personal Protective Equipment Required | | PPE | | Additional Information | Head Protection: | No | | Hearing Protection: | Yes | | Glasses: | Yes | | Side Shields: | Yes | Permanent Attachment (Yes or No): Yes | Face Shield: | No | | Goggles: | No | | Other Eye Protection: | No | | Other Face Protection: | No | | | Chest Guards: | No | | Sleeve/Arm Guards: | No | | Gloves: | Yes | Depending upon task being performed. | | Gloves: (other) | No | | Wrist Protection: | No | | | Elbow Protection: | No | | | Knee Protection: | No | | Half Apron: | No | | | Full Apron: | No | | | Chaps: | No | | | Spats: | No | | | Boots: | Yes | Steel Toe | | | Pants: | Yes | Pants may not be shorter than the Shoe/Boot being worn. | | Shirt: | Yes | May be sleeveless with Supervisor permission. | | Clothing Type: | Yes | Cotton or Wool | | Fall Arrest: | No | | | Respirator: | No | | Disclaimer: This job description is not intended nor should it be construed to be an exhaustive list of all responsibilities duties skills or working conditions associated with a particular job. It is intended only to be a general description of the essential functions common to positions of this type. |
| Required Experience:
IC
Denison IndustriesJOB DESCRIPTIONJob Title: FILM AND NON-FILM RADIOGRAPHY TECHNICIAN LEVEL llEmployment Status:Full-TimeFLSA Status:Non-ExemptDepartment:Quality Non- Destructive TestingPosition Reports To:Director of Quality/NDT SupervisorSummary Description:Radiograph utilizing film and non-film p...
Denison Industries JOB DESCRIPTION | Job Title: FILM AND NON-FILM RADIOGRAPHY TECHNICIAN LEVEL ll | Employment Status: Full-Time | FLSA Status: Non-Exempt | Department: Quality Non- Destructive Testing | Position Reports To: Director of Quality/NDT Supervisor | Summary Description: Radiograph utilizing film and non-film processes and accept/reject aluminum castings. Direct or carry out tests in the method certified to the prescribed process specification. Set-up and calibrate equipment where applicable and interpret and evaluate results with reference to applicable codes standards and specifications. Apply familiarity with the scope and limitations for the method and apply detailed techniques to the parts within the limit of his/her qualifications. Organize and report test results and prepare written instructions. Use familiarity with the type and location of expected defects for the fabrication process used to make the parts and exercise assigned responsibility for on-the-job training and guidance of trainees and Level I personnel. | Essential Functions: - Align object on stand between source of x-rays and film
- Mask peripheral areas with lead shields
- Select type of film and determine exposure distance and time
- Verify radiation intensities
- Adjust controls of x-ray equipment on console to take radiograph
- Remove and develop film
- Monitor working area to protect personnel
- Mark defects appearing on film and assist in analyzing findings
- Set up and shoot castings using DDA Radiography equipment and techniques
- Perform required checks and calibrations to customer and industry specifications
- Investigate suspected discontinuities in castings using correct procedures and make accept/reject decisions based on those procedures
- Perform any and all other job related tasks as assigned
| Skills or Experience Required: Must have High School diploma or GED; Radiation Safety Card for the state of Texas (preferred); Level II Film Radiography (RT) certification; Level II Non-film Radiography (CR or DR) certification (preferred) must have 40 hours of formal training/1200 hours experience as a Level I on Radiographic Experience with Aerospace castings (preferred). | Other Position Demands or Requirements: Must be able to use the following machines tools equipment and/or work aids: RT: X-Ray Machines: Comet 160KV/22 XRG controller Comet 320/26 Ivario controller and Comet 320/11 MP1 controller; fully automatic Waygate NDT-U film processor; Penetrex High Intensity Dual Window FV-2014 viewer KOWOLUX X5 viewer; light meter; magnifying glasses 3X to 10X; penetrameters; lead screens; light tight vinyl cassettes; DT-300 densitometer; Fuji- Class I II and Class III safety films; DR: DDA Hardware: PiXS DR Custom Dual Robotic. PXS 320 / R-2 / 20. CR: Fuji DynamIx HR2 |
PHYSICAL JOB DEMANDS: ACTION | Weight | N/A | Occasional 1 - 33% | Frequent 34 - 66% | Constant 67 - 100% | | Max Avg | | | | | Pushing - Assisted | 50 | | | | | Pulling - Assisted | 50 | | | X | | Floor to Knuckle Lift | so | | | X | | Knuckle to Shoulder Lift | 50 | | | x | | Shoulder to Overhead Lift | | | | | | Carrying | | | | | | Sitting | | | | | | Standing | | | | | | Walking | | | | | | Climbing Stairs | | | | | | Sustained Bending | | | | | | Overhead Reaching | | | | x | | Crawling | | | | | | Squatting (Repeated) | | | | | | Kneeling | | | x | | | Stooping (Repeated Bending) | | | X | | | Crouching | | | X | | | Climbing Ladders | | | | | | Balancing | | | | | | Handling | | | | | X | Fingering | | | | | | Feeling | | | | | | Talking | | | | X | | Hearing | | | | x | | Tasting | | | | | | Smelling | | | | | | Near Acuity | | | | | | Far Acuity | | | | | | Depth Perception | | | | X | | Color Perception | | | | X | | Peripheral Vision | | | | | |
Repetitive motion Trip hazards High ambient temperatures & Head hazards | Personal Protective Equipment Required | | PPE | | Additional Information | Head Protection: | No | | Hearing Protection: | Yes | | Glasses: | Yes | | Side Shields: | Yes | Permanent Attachment (Yes or No): Yes | Face Shield: | No | | Goggles: | No | | Other Eye Protection: | No | | Other Face Protection: | No | | | Chest Guards: | No | | Sleeve/Arm Guards: | No | | Gloves: | Yes | Depending upon task being performed. | | Gloves: (other) | No | | Wrist Protection: | No | | | Elbow Protection: | No | | | Knee Protection: | No | | Half Apron: | No | | | Full Apron: | No | | | Chaps: | No | | | Spats: | No | | | Boots: | Yes | Steel Toe | | | Pants: | Yes | Pants may not be shorter than the Shoe/Boot being worn. | | Shirt: | Yes | May be sleeveless with Supervisor permission. | | Clothing Type: | Yes | Cotton or Wool | | Fall Arrest: | No | | | Respirator: | No | | Disclaimer: This job description is not intended nor should it be construed to be an exhaustive list of all responsibilities duties skills or working conditions associated with a particular job. It is intended only to be a general description of the essential functions common to positions of this type. |
| Required Experience:
IC
View more
View less