Instrumentation & Controls Head (PMC)

Job Description

AECOM is seeking a highly experienced Instrumentation & Controls Head for PMC to lead I&C engineering design review and execution oversight for power transmission systems substations (AIS/GIS/Hybrid Digital) HVDC systems FACTS (STATCOM/SVC) and renewable energy integration (Solar Wind BESS).

The role will function as the PMC discipline lead and PMC representative for all control automation communication and grid monitoring systems ensuring compliance with technical specifications grid codes cybersecurity standards and project performance requirements across the full project lifecycle.

The position requires strong expertise in advanced grid control systems including HVDC control & protection STATCOM automation WAPS / Remedial Action Scheme (RAS) schemes and PMU-based systems with close coordination across Electrical Protection Telecom and Digital disciplines.

Key Accountabilities

1. Engineering Design Review & Technical Governance

• Lead basic and detailed engineering reviews of SCADA SAS PLC/DCS EMS and communication systems.
• Review advanced control systems for:
  • HVDC systems (converter control pole control DC protection redundancy)
  • FACTS (STATCOM/SVC) for voltage regulation and reactive power control
  • WAPS / RAS schemes for grid stability and contingency management
  • PMU systems for real-time monitoring and advanced Grid modernization
• Validate system architecture network topology IOs Develop Algorithms as per system requirements IED/RTU configurations and HMI systems.
• Ensure compliance with IEC 61850 IEC/104 IEEE C37.118 IEC 61970/61968 and utility standards.

2. PMCs Engineer Role

• Act as the single-point accountability for all I&C systems within the PMC framework.
• Ensure EPC contractors adhere to approved designs specifications and integration requirements.
• Lead design reviews interface management and multidisciplinary coordination.
• Support technical due diligence vendor evaluations and techno-commercial assessments.

3. Construction Supervision & Site Execution

• Oversee installation of control panels SCADA/SAS HVDC/STATCOM control systems PMUs EMS and communication networks.
• Ensure proper implementation of fiber optic systems redundancy architecture and time synchronization (GPS/NTP).
• Conduct site inspections audits and progress monitoring ensuring QA/QC and HSE compliance.

4. Testing Commissioning & Grid Integration

• Lead and witness FAT SAT pre-commissioning and commissioning for:
  • HVDC control & protection systems
  • STATCOM / FACTS systems
  • WAPS / PMU-based monitoring systems
  • EMS integration
• Validate integration with SLDC/RLDC/NLDC REMC and utility SCADA/EMS platforms.
• Ensure correct configuration of alarms interlocks event logs remote control and synchrophasor data flows.
• Support grid compliance testing and dynamic performance validation.

5. Communication Systems & Cybersecurity

• Ensure implementation of communication protocols including IEC 61850 IEC 104 Modbus DNP3 IEEE C37.118.
• Oversee synchrophasor communication architecture (PMUPDCControl Center).
• Ensure compliance with IEC 62351 cybersecurity standards.
• Validate redundancy failover and network reliability.

6. Project Controls Risk & Reporting

• Integrate I&C deliverables into project schedules milestones and commissioning timelines.
• Identify risks related to complex system integration (HVDC FACTS WAPS) and implement mitigation strategies.
• Support progress reporting KPI tracking and management dashboards.

7. Quality Assurance & Documentation

• Develop and implement QA/QC plans ITPs FAT/SAT procedures and inspection checklists.
• Review and approve engineering documents test reports as-built drawings and O&M manuals.
• Ensure compliance with contractual regulatory and client requirements.

8. Renewable & BESS Integration

• Lead integration of SCADA EMS plant controllers and hybrid control systems.
• Ensure coordination between renewable plants BESS EHV Transmission line / HVDC links and STATCOM systems.
• Validate control strategies for frequency response voltage control ramp rate and ancillary services.

9. Stakeholder Coordination & Leadership

• Interface with clients EPC contractors OEMs system operators and regulatory authorities.
• Lead multidisciplinary teams and provide technical leadership and mentorship.
• Support issue resolution claims management and change control processes.

Key Focus Areas PT&D with Hybrid Renewable Energy

1. Smart Grid Integration & Advanced Monitoring

• Deployment of SCADA EMS WAPS and PMU-based systems for real-time monitoring and control.
• Integration of Solar Wind BESS HVDC and STATCOM into transmission networks.
• Adoption of digital substations and real-time analytics platforms.

2. Grid Stability & Dynamic Control

• Implementation of HVDC STATCOM and WAPS/RAS schemes for voltage and frequency stability.
• Use of PMU-based wide-area monitoring for dynamic grid assessment.
• Coordinated control of hybrid renewable systems and grid infrastructure.

3. Safety Protection & Reliability

• Strict adherence to protection schemes interlocks and fail-safe logic.
• Implementation of zero-harm safety philosophy during commissioning.
• Ensuring system redundancy cybersecurity and high availability.

4. Efficient Project Delivery & Interface Management

• Manage technical interfaces between EPC contractors OEMs and client teams.
• Align I&C deliverables with project schedules and commissioning milestones.
• Drive resolution of design integration and site execution challenges.

5. Digitalization & Data-Driven Execution

• Use of integrated dashboards analytics and real-time monitoring tools.
• Enable predictive analysis faster decision-making and lifecycle optimization.

6. Hybrid Renewable Optimization

• Optimize operation of Solar Wind BESS hybrid systems.
• Support energy management dispatch optimization and grid support functions.
• Ensure long-term efficiency reliability and grid compliance.

Key Competencies

• Advanced Grid Control Systems Expertise
• Technical Leadership & Engineering Governance
• Interface & Stakeholder Management
• Risk Management & System Integration
• Quality & Compliance Orientation
• Project Delivery Excellence

Qualifications :

• Bachelors Degree in Instrumentation / Electronics / Electrical Engineering (Masters preferred).
• 15 years of experience in I&C systems for transmission substations HVDC and hybrid renewable energy projects.
• Proven experience in PMCs Engineer roles.
• Strong expertise in:
  • SAS SCADA PLC/DCS systems
  • HVDC and FACTS (STATCOM/SVC)
  • WAPS / RAS and PMU systems
  • EMS integration (for Hybrid renewable projects)

Additional Information :

• Strong communication and stakeholder management skills.
• Ability to operate in a matrixed multicultural and multidisciplinary environment.
• Willingness to travel for project reviews factory visits and site support.
• Demonstrates leadership accountability and adaptability in complex project environments.

About AECOM 

AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status AECOM benefits may include medical dental vision life AD&D disability benefits paid time off leaves of absences voluntary benefits perks flexible work options well-being resources employee assistance program business travel insurance service recognition awards retirement savings plan and employee stock purchase plan. 

AECOM is the global infrastructure leader committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities we solve our clients complex challenges in water environment energy transportation and buildings. Our teams partner with public- and private-sector clients to create innovative sustainable and resilient solutions throughout the project lifecycle from advisory planning design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at . 

What makes AECOM a great place to work 

You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts youll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills helping you build the career youve always envisioned. Here youll find a welcoming workplace built on respect collaboration and community - where you have the freedom to grow in a world of opportunity. 

As an Equal Opportunity Employer we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. 

Remote Work :

No

Employment Type :

Full-time