CDL Class A Truck Driver DDC

Milwaukie, OR - USA

Monthly Salary: Not Disclosed

Posted on: 16 hours ago

Vacancies: 1 Vacancy

Job Summary

SUMMARY

To drive company tractor trailer flatbed or combination vehicles and other trucks between PCC (Precision Castparts) plants vendors and outside processors to pick up and deliver parts supplies and equipment in a safe and timely manner.

ESSENTIAL FUNCTIONS

Deliveries
1. Objective
  1. to pick up and deliver parts supplies materials metals and equipment on a timely basis.
2. Essential Job Function
  1. Picks up and delivers parts manufacturing supplies and other materials between PCC facilities vendors and outside processors.
  2. Inspects all items to be transported to assure they can be safely moved; must refuse to move any unsafe items.
  3. Secures all loads to prevent shifting spillage and damage during transport.
  4. Transports hazardous chemicals/materials which are placarded and follows all procedures for handling hazardous materials. Must have current OSHA Haz. Mat. Emergency Response trainingcertification.
  5. Loads and unloads trucks at the receiving docks. Operates forklift to load or unload as needed.
  6. Must be available for overtime work for occasional after-hours and weekend runs.
3. Maintenance and Warehousing
  1. Objective
    1. maintain vehicles in good working order and assist with warehousing duties as needed.
  2. Essential Job Function
    1. Performs and is responsible for minor maintenance and repair of vehicles; reports mechanical problems or safety hazards to supervisor and on vehicle inspection sheet; is responsible for the condition and cleanliness of the truck and trailers.
    2. Performs general warehousing duties when not completing deliveries or when assigned; stocks materials pulls requisitions marks material cycle counts performs inventory cleans and sweeps warehouse empties dumpsters etc.
  3. Safety
    1. Objective
      1. to take responsibility for and demonstrate safe work practices.
    2. Essential Job Function
      1. Adheres to all Federal and State laws and regulations.
      2. Adheres to PCC and department safety rules.
      3. Safely operates all vehicles machines and equipment.
      4. Identifies and reports safety problems.
      5. Does not move unsafe loads.
      6. Completes pre-trip vehicle safety inspections at beginning of each shift; completes and turns in inspection form.
      7. Assures trucks are equipped with necessary safety equipment.
      8. Assures tire tread is within regulations.
      9. Log vehicle mileage (daily)
    3. Regulatory Compliance
      1. Objective
        to operate vehicles within state and federal regulations and to comply with all required licensing training and safety regulations.
      2. Essential Job Function
        Operates vehicles under Department of Transportation (DOT) regulations including standards for Commercial Driver Licenses; maintains current written road and medical certifications and Haz. Mat. Emergency Response certification.
        Maintains satisfactory driving records; certifies driving record annually to supervisor reports any traffic violation convictions or loss of license privileges immediately to supervisor; reports all accidents immediately to supervisor.
        Receives training and follows all regulations regarding transport and handling of hazardous materials.
        Complies with federal and PCC regulations regarding drug/alcohol testing in transportation industry.
        Reports all incidents regarding hazardous materials as required by federal and state regulations.
      3. Essential Equipment Vehicles Tools and/or Machinery Used:
        Trucks (semis cabover vans delivery vans reefer units trailers up to 53 and flatbeds.)
        forklift
        pallet jacks
        hand truck
        basic hand tools (e.g. wrenches pliers etc.)
        pressure washer
      4. Training
        Route training is provided on the job.
        Must have current Hazardous Materials certificate and previous handling experience.
        Must complete Defense Driving Safety Training course for professional drivers.
        PCCs Forklift Driving Safety Certification Training must be completed.
      5. Interacts with PCC vendor and customer personnel in a courteous professional manner attaining exemplary customer service.
      6. Completes logs and records.
      7. Perform other tasks as directed.

QUALIFICATIONS

Must possess a valid Commercial Driver License (Class A) with the Hazardous Materials Endorsement and at least 21 years of age.
Must have a valid DOT written examination certificate or passage of written exam prior to hire.
Must pass the PCC road test and a valid DOT road test certificate.
Must have a valid DOT medical certificate and passage of a PCC job-related medical exam
Must have a safe driving record with emphasis on safety and a current Motor Vehicles Report.
Must have previous commercial truck driving experience with a minimum of 2 years driving tractor trailers accident free. A professional driver training program will be considered.
Must have previous forklift experience.
Must be able to interact effectively and courteously with company and outside personnel.
Must be able to read follow and interpret Hazardous Materials Specifications examinations logs and records.
Must be able to perform basic mathematical calculations. (Addition subtraction multiplication division.
Must possess the physical ability to perform the essential job functions.

Required Experience:

SUMMARYTo drive company tractor trailer flatbed or combination vehicles and other trucks between PCC (Precision Castparts) plants vendors and outside processors to pick up and deliver parts supplies and equipment in a safe and timely manner.ESSENTIAL FUNCTIONSDeliveriesObjectiveto pick up and delive...

SUMMARY

ESSENTIAL FUNCTIONS

Deliveries
1. Objective
  1. to pick up and deliver parts supplies materials metals and equipment on a timely basis.
2. Essential Job Function
  1. Picks up and delivers parts manufacturing supplies and other materials between PCC facilities vendors and outside processors.
  2. Inspects all items to be transported to assure they can be safely moved; must refuse to move any unsafe items.
  3. Secures all loads to prevent shifting spillage and damage during transport.
  4. Transports hazardous chemicals/materials which are placarded and follows all procedures for handling hazardous materials. Must have current OSHA Haz. Mat. Emergency Response trainingcertification.
  5. Loads and unloads trucks at the receiving docks. Operates forklift to load or unload as needed.
  6. Must be available for overtime work for occasional after-hours and weekend runs.
3. Maintenance and Warehousing
  1. Objective
    1. maintain vehicles in good working order and assist with warehousing duties as needed.
  2. Essential Job Function
    1. Performs and is responsible for minor maintenance and repair of vehicles; reports mechanical problems or safety hazards to supervisor and on vehicle inspection sheet; is responsible for the condition and cleanliness of the truck and trailers.
    2. Performs general warehousing duties when not completing deliveries or when assigned; stocks materials pulls requisitions marks material cycle counts performs inventory cleans and sweeps warehouse empties dumpsters etc.
  3. Safety
    1. Objective
      1. to take responsibility for and demonstrate safe work practices.
    2. Essential Job Function
      1. Adheres to all Federal and State laws and regulations.
      2. Adheres to PCC and department safety rules.
      3. Safely operates all vehicles machines and equipment.
      4. Identifies and reports safety problems.
      5. Does not move unsafe loads.
      6. Completes pre-trip vehicle safety inspections at beginning of each shift; completes and turns in inspection form.
      7. Assures trucks are equipped with necessary safety equipment.
      8. Assures tire tread is within regulations.
      9. Log vehicle mileage (daily)
    3. Regulatory Compliance
      1. Objective
        to operate vehicles within state and federal regulations and to comply with all required licensing training and safety regulations.
      2. Essential Job Function
        Operates vehicles under Department of Transportation (DOT) regulations including standards for Commercial Driver Licenses; maintains current written road and medical certifications and Haz. Mat. Emergency Response certification.
        Maintains satisfactory driving records; certifies driving record annually to supervisor reports any traffic violation convictions or loss of license privileges immediately to supervisor; reports all accidents immediately to supervisor.
        Receives training and follows all regulations regarding transport and handling of hazardous materials.
        Complies with federal and PCC regulations regarding drug/alcohol testing in transportation industry.
        Reports all incidents regarding hazardous materials as required by federal and state regulations.
      3. Essential Equipment Vehicles Tools and/or Machinery Used:
        Trucks (semis cabover vans delivery vans reefer units trailers up to 53 and flatbeds.)
        forklift
        pallet jacks
        hand truck
        basic hand tools (e.g. wrenches pliers etc.)
        pressure washer
      4. Training
        Route training is provided on the job.
        Must have current Hazardous Materials certificate and previous handling experience.
        Must complete Defense Driving Safety Training course for professional drivers.
        PCCs Forklift Driving Safety Certification Training must be completed.
      5. Interacts with PCC vendor and customer personnel in a courteous professional manner attaining exemplary customer service.
      6. Completes logs and records.
      7. Perform other tasks as directed.

QUALIFICATIONS

Must possess a valid Commercial Driver License (Class A) with the Hazardous Materials Endorsement and at least 21 years of age.
Must have a valid DOT written examination certificate or passage of written exam prior to hire.
Must pass the PCC road test and a valid DOT road test certificate.
Must have a valid DOT medical certificate and passage of a PCC job-related medical exam
Must have a safe driving record with emphasis on safety and a current Motor Vehicles Report.
Must have previous commercial truck driving experience with a minimum of 2 years driving tractor trailers accident free. A professional driver training program will be considered.
Must have previous forklift experience.
Must be able to interact effectively and courteously with company and outside personnel.
Must be able to read follow and interpret Hazardous Materials Specifications examinations logs and records.
Must be able to perform basic mathematical calculations. (Addition subtraction multiplication division.
Must possess the physical ability to perform the essential job functions.

Required Experience: