DeBeers Consolidated Mines is looking for drill rig operators with extensive experience at installation of primary support secondary support and face drilling with a double boom split feed drill rig (Sandvik DD421 DD420 DD321 DD320).
Responsibilities
- Contribute to a culture of zero harm by adhering to all requirements as laid down by legislation and health safety environmental and security policies and procedures and by the application of specific instructions to own work area and task completion.
- Installation of welded mesh support with split sets and roofbolts by means of the drill rig in accordance with a predetermined support pattern.
- Take-over/ hand over shift from off/on-going drill rig operator attend to any abnormalities first and then report to the supervisor to receive further instructions.
- Perform visual Inspections of equipment before and during operation according to departmental procedure to minimise breakdowns and operational losses by the timeous reporting of defects / abnormalities to Supervisor.
- Operate equipment according to relevant mining requirements and standard operating procedures to achieve daily task.
- Report and record relevant operational data as required by department procedures to compile production reports.
- Conduct efficient housekeeping of equipment and work area in accordance with departmental requirements.
- Perform all activities according to instructions procedures and mining needs.
- Participate in cost saving initiatives and adhere to financial procedures
- Assist the engineering personnel with breakdown maintenance as well as planned maintenance activities
- Accountable for own workspace and activities.
Qualifications :
Formal qualifications
- Grade 12/N3/ Equivalent NQF level 4 qualification
- MQA Competent A and B Certificate for underground
- Double Boom Drill Rig Certificate
- A valid underground metalliferous blasting certificate /MQA Rock Breaking Certificate will be advantageous.
Experience required
- Minimum 3 years practical experience operating double boom split feed drill rig in a trackless mechanised underground mining environment
- Install primary support with welded wire mesh split sets and resin bolts.
- Drill and install long anchors with a double boom drill rig
- Competent to support and drill multiple development ends in one shift
- Experience with Sandvik double boom drill rigs will be a definite advantage
- Experience in trackless mechanised high-speed development is advantageous
- The incumbent will be required to work shifts
Additional requirement
- Code B or higher Drivers License
- Required classification as per VTS testing for specific role (Orange )
- Medical Certificate of Fitness to work underground
For all internal applicants
- You are required to complete an internal application form and attach detailed CV. This form must be accompanied with a signature from your immediate Line Manager and Head of Department failure to do so will render your application invalid.
Background Checks
Successful candidates will be required to complete background screening which may include a criminal check validation of qualifications and medicals fitness.
Additional Information :
Who We Are
We aim to lead the industry by pursuing ever safer and more responsible ways of working demonstrating integrity and showing care and respect for people and the planet. That means we are constantly seeking new opportunities to mine and process our products sustainably using less water less energy and more precise extraction technologies.
What We Offer
When you join De Beers you can expect to enjoy a competitive salary and benefits package. But more than this you will find yourself in an environment where the opportunities for learning and growth are second to none. From technical training to leadership programmes we bring out the best in our people. There are opportunities to move onwards and upwards too.
Inclusion and Diversity
De Beers is an equal opportunities employer. We are committed to promoting an inclusive and diverse workplace where we value and respect every colleague for who they are and provide equality of opportunity so that everyone can fulfil their potential.
How to Apply
To apply for this role please complete our online application form. You will have the opportunity to upload your CV and other relevant documentation as part of this process.
Values
Put Safety First We consider all risks to people and the environment before proceeding with any activity. We address risks before beginning any activity even if this means stopping a task. Zero Harm is always our goal.
Be Passionate We are exhilarated by the product we sell the challenges we face and the opportunities we create.
Pull Together Being united in purpose and action we will turn the diversity of our people skills and experience into an unparalleled source of strength.
Build Trust We will always listen first then act with openness honesty and integrity so that our relationships flourish
Show we Care The people whose lives we touch their communities nations and the environment we share all matter deeply to us. We will always think through the consequences of what we do so that our contribution to the world is real lasting and makes us proud.
Shape the Future We will find new ways. We will set demanding targets and take both tough decisions and considered risks to achieve them. We will insist on excellent execution and reward those who deliver.
Eligibility Criteria
This role is open to all individuals and we will support employees who might need to relocate
Closing date: 19 January 2026
Should you not have heard from the HR Department four weeks after the closing date kindly consider your application as unsuccessful.
#LI-LN1
Remote Work :
No
Employment Type :
Full-time
DeBeers Consolidated Mines is looking for drill rig operators with extensive experience at installation of primary support secondary support and face drilling with a double boom split feed drill rig (Sandvik DD421 DD420 DD321 DD320).ResponsibilitiesContribute to a culture of zero harm by adhering to...
DeBeers Consolidated Mines is looking for drill rig operators with extensive experience at installation of primary support secondary support and face drilling with a double boom split feed drill rig (Sandvik DD421 DD420 DD321 DD320).
Responsibilities
- Contribute to a culture of zero harm by adhering to all requirements as laid down by legislation and health safety environmental and security policies and procedures and by the application of specific instructions to own work area and task completion.
- Installation of welded mesh support with split sets and roofbolts by means of the drill rig in accordance with a predetermined support pattern.
- Take-over/ hand over shift from off/on-going drill rig operator attend to any abnormalities first and then report to the supervisor to receive further instructions.
- Perform visual Inspections of equipment before and during operation according to departmental procedure to minimise breakdowns and operational losses by the timeous reporting of defects / abnormalities to Supervisor.
- Operate equipment according to relevant mining requirements and standard operating procedures to achieve daily task.
- Report and record relevant operational data as required by department procedures to compile production reports.
- Conduct efficient housekeeping of equipment and work area in accordance with departmental requirements.
- Perform all activities according to instructions procedures and mining needs.
- Participate in cost saving initiatives and adhere to financial procedures
- Assist the engineering personnel with breakdown maintenance as well as planned maintenance activities
- Accountable for own workspace and activities.
Qualifications :
Formal qualifications
- Grade 12/N3/ Equivalent NQF level 4 qualification
- MQA Competent A and B Certificate for underground
- Double Boom Drill Rig Certificate
- A valid underground metalliferous blasting certificate /MQA Rock Breaking Certificate will be advantageous.
Experience required
- Minimum 3 years practical experience operating double boom split feed drill rig in a trackless mechanised underground mining environment
- Install primary support with welded wire mesh split sets and resin bolts.
- Drill and install long anchors with a double boom drill rig
- Competent to support and drill multiple development ends in one shift
- Experience with Sandvik double boom drill rigs will be a definite advantage
- Experience in trackless mechanised high-speed development is advantageous
- The incumbent will be required to work shifts
Additional requirement
- Code B or higher Drivers License
- Required classification as per VTS testing for specific role (Orange )
- Medical Certificate of Fitness to work underground
For all internal applicants
- You are required to complete an internal application form and attach detailed CV. This form must be accompanied with a signature from your immediate Line Manager and Head of Department failure to do so will render your application invalid.
Background Checks
Successful candidates will be required to complete background screening which may include a criminal check validation of qualifications and medicals fitness.
Additional Information :
Who We Are
We aim to lead the industry by pursuing ever safer and more responsible ways of working demonstrating integrity and showing care and respect for people and the planet. That means we are constantly seeking new opportunities to mine and process our products sustainably using less water less energy and more precise extraction technologies.
What We Offer
When you join De Beers you can expect to enjoy a competitive salary and benefits package. But more than this you will find yourself in an environment where the opportunities for learning and growth are second to none. From technical training to leadership programmes we bring out the best in our people. There are opportunities to move onwards and upwards too.
Inclusion and Diversity
De Beers is an equal opportunities employer. We are committed to promoting an inclusive and diverse workplace where we value and respect every colleague for who they are and provide equality of opportunity so that everyone can fulfil their potential.
How to Apply
To apply for this role please complete our online application form. You will have the opportunity to upload your CV and other relevant documentation as part of this process.
Values
Put Safety First We consider all risks to people and the environment before proceeding with any activity. We address risks before beginning any activity even if this means stopping a task. Zero Harm is always our goal.
Be Passionate We are exhilarated by the product we sell the challenges we face and the opportunities we create.
Pull Together Being united in purpose and action we will turn the diversity of our people skills and experience into an unparalleled source of strength.
Build Trust We will always listen first then act with openness honesty and integrity so that our relationships flourish
Show we Care The people whose lives we touch their communities nations and the environment we share all matter deeply to us. We will always think through the consequences of what we do so that our contribution to the world is real lasting and makes us proud.
Shape the Future We will find new ways. We will set demanding targets and take both tough decisions and considered risks to achieve them. We will insist on excellent execution and reward those who deliver.
Eligibility Criteria
This role is open to all individuals and we will support employees who might need to relocate
Closing date: 19 January 2026
Should you not have heard from the HR Department four weeks after the closing date kindly consider your application as unsuccessful.
#LI-LN1
Remote Work :
No
Employment Type :
Full-time
View more
View less