2nd Shift A&P Technician

Fort Worth, TX - USA

Monthly Salary: Not Disclosed

Posted on: 10 hours ago

Vacancies: 1 Vacancy

Job Summary

POSITION SUMMARY

Airframe and Powerplant (A&P) Technician in a commercial MRO setting is responsible for performing comprehensive maintenance repair and overhaul services on commercial aircraft or components to ensure safety reliability and regulatory compliance. This role supports high-volume operations and tight turnaround schedules requiring precision efficiency and adherence to FAA and OEM standards.

Must be able to work 2^nd Shift 4/10s from 4:00pm to 2:30am Sunday-Wednesday or Wednesday- Saturday depending on company needs

JOB RESPONSIBILITIES

Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems pneumatic systems plumbing precision assemblies rigging and controls etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs reworks and modifies worn or defective assemblies making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system consulting internal procedures that have been FAA approved original equipment manufacturers (OEMs) technical data and work package instructions.
Consult the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before signing off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Control for final/in-progress inspection and re-certification of airworthiness.
Provides Manager with performance statistics and other operational data as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.

ESSENTIAL KNOWLEDGE SKILLS AND ABILITIES

Education:

High School/ GED
Airframe or Airframe & Powerplant License

Experience:

Required: Airframe & Powerplant License.
Recommended experience in the repair or maintenance of aircraft general aviation aircraft aircraft component repair and or overhaul or aviation military experience.
Preferred depot level aircraft maintenance and repair experience (repair of mechanical systems components hydraulics pneumatics and rigging etc.); proficiency with interpretation of original equipment manufacturers technical data or work package instructions; experience using power or pneumatic hand tools.
Experience may be credited from other related industries as determined by the hiring manager.

Knowledge Skills & Abilities:

Assignments require knowledge beyond the assigned work.
Demonstrates correct understanding of routine aspects of work.
Knowledge of machines and tools including their uses repairs and maintenance.
Knowledge of principles and processes for providing customer service.
Skilled with repairing troubleshooting installing and equipment maintenance.
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.

Working Conditions / Environment/Special Requirements

Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA EPA State and Federal regulations.
As required by the position must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 Respirator Protection regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required
Employees will be subject to random drug and alcohol testing under FAA regulations

General Commitment for All Employees

Commitment to company values and complies with department norms policies directives and procedures.
Incorporates Lean and P3E processes and concepts into daily activities.
Strive for continuous improvement to processes and procedures.
Honors and protects confidential and proprietary documents and information.
Satisfies work schedule requirements.
The job description is not designed to cover or contain a comprehensive listing of all activities duties or responsibilities that are required by the employee. Performs other duties as assigned

Required Experience:

POSITION SUMMARY Airframe and Powerplant (A&P) Technician in a commercial MRO setting is responsible for performing comprehensive maintenance repair and overhaul services on commercial aircraft or components to ensure safety reliability and regulatory compliance. This role supports high-volume opera...

POSITION SUMMARY

Must be able to work 2^nd Shift 4/10s from 4:00pm to 2:30am Sunday-Wednesday or Wednesday- Saturday depending on company needs

JOB RESPONSIBILITIES

Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems pneumatic systems plumbing precision assemblies rigging and controls etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs reworks and modifies worn or defective assemblies making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system consulting internal procedures that have been FAA approved original equipment manufacturers (OEMs) technical data and work package instructions.
Consult the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before signing off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Control for final/in-progress inspection and re-certification of airworthiness.
Provides Manager with performance statistics and other operational data as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.

ESSENTIAL KNOWLEDGE SKILLS AND ABILITIES

Education:

High School/ GED
Airframe or Airframe & Powerplant License

Experience:

Required: Airframe & Powerplant License.
Recommended experience in the repair or maintenance of aircraft general aviation aircraft aircraft component repair and or overhaul or aviation military experience.
Preferred depot level aircraft maintenance and repair experience (repair of mechanical systems components hydraulics pneumatics and rigging etc.); proficiency with interpretation of original equipment manufacturers technical data or work package instructions; experience using power or pneumatic hand tools.
Experience may be credited from other related industries as determined by the hiring manager.

Knowledge Skills & Abilities:

Assignments require knowledge beyond the assigned work.
Demonstrates correct understanding of routine aspects of work.
Knowledge of machines and tools including their uses repairs and maintenance.
Knowledge of principles and processes for providing customer service.
Skilled with repairing troubleshooting installing and equipment maintenance.
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.

Working Conditions / Environment/Special Requirements

Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA EPA State and Federal regulations.
As required by the position must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 Respirator Protection regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required
Employees will be subject to random drug and alcohol testing under FAA regulations

General Commitment for All Employees

Commitment to company values and complies with department norms policies directives and procedures.
Incorporates Lean and P3E processes and concepts into daily activities.
Strive for continuous improvement to processes and procedures.
Honors and protects confidential and proprietary documents and information.
Satisfies work schedule requirements.
The job description is not designed to cover or contain a comprehensive listing of all activities duties or responsibilities that are required by the employee. Performs other duties as assigned

Required Experience:

Key Skills

Quality Analysis
Facility
ISO
Inventory Levels
Root cause Analysis
Shift operations
General Maintenance
Daily Operations
Supervision
Analysis
PLC
Safety Standards
Quality Standards
Time management skills
Troubleshooting

Apply Now

About Company

Embraer

POSITION SUMMARY Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and man ... View more

View Profile View Profile

AI AutoApply

Apply to 100+ jobs with one click