Civil Engineer (20- 25 hr/week Part Time)

• Travel: Up to 25% along NYS Thruway with occasional overnight permitted.
• Applicable travel expenses will be billable to the client by way of monthly expense invoices.

Description

Seeking an engineering resource to assist the project team with engineering design review validation of compliance with the NYS Building Code and verification of asbuilt drawing and documentation for the construction of identified critical communication sites across New York State.

Duties

• Subsurface Investigation
  • Evaluate contractor submitted site plans and reports detailing subservice investigations.
  • Review contractor soil borings or test pits for specified site locations.
  • Evaluate and report on Standard Penetration Tests (SPT) and soil and rock core samples that have been collected by the contractor.
  • Evaluate and report any concerns with groundwater levels collected by the contractor for specified site locations.
• Laboratory Testing
  • Review and report on lab tests of collected samples including soil classification moisture content and strength tests.
• Geotechnical Report
  • Evaluate geotechnical reports prepared and provided by the contractor for each new tower location.
  • Ensure the contractor provides a summary of findings boring logs laboratory test results and recommendations for each new tower foundation.
  • Evaluate the new tower designs and remediation plans for work needed to upgrade existing towers and their foundation to ensure all applicable codes and load requirements are met.
• Utility Identification
  • Verify the contractor has requested and obtained utility locates through the states One-Call system.
  • Verify the contractor has performed private utility locating services to identify any un-marked subsurface facilities.
  • Verify contractor plans designating the approximate horizontal location of all utilities using surface geophysical techniques.
• Trenching and Excavation Plan
  • Evaluate the contractors detailed trenching and excavation plan that includes minimum clearance requirements from existing utilities.
  • Ensure the contractor specifies excavation methods and safety protocols.
• Tower Structural Code Compliance Review
  • Review contractors structural analysis in accordance with all applicable codes such as TIA-222-H IBC and ASCE standards.
• Tower Structural Analysis Report
  • Review and confirm that a properly signed and sealed structural analysis report detailing the towers design and capacity has been submitted.
• Foundation Construction Inspection
  • Review and report on the foundation design submittals ensuring the necessary formwork reinforcing steel and concrete for the tower shelter and generator foundations is documented.
  • Inspection and evaluation of concrete work may be necessary to ensure proper installation according to design drawings.
• Slump Testing Evaluation
  • Evaluate and report on contractor slump test results and ensure results conform to project specifications.
• Concrete Core Sampling and Evaluation
  • Inspect contractor concrete core samples from the cured foundation taken at specified intervals.
  • Evaluate contractors report summarizing the core sample results and certifying the foundations strength and report findings.
• Site Preparation
  • Inspect and confirm contractor plans identify site clearing grubbing vegetation and debris removal has been properly identified in the design drawings and completed upon site inspection.
  • Inspect and confirm rough and fine grading of the site to achieve the correct elevation has been properly identified in the design drawings and completed upon site inspection.
• Excavation and Backfill
  • Inspect and confirm excavation for the foundation and utility trenches according to the trenching plan has been properly identified in the design drawings and completed upon site inspection.
  • Inspect and confirm compact backfill material around the foundation and in trenches to prevent settlement has been completed by the contractor.
• Erosion and Sediment Control
  • Inspect and confirm temporary erosion and sediment control measures as required by local regulations have been properly identified in the design drawings and completed upon site inspection.

Mandatory Requirements

• Experience (15 Years)

Requirements

• This is a Hybrid Part-time and travel required.
• Bachelors degree in Civil/Structural Engineering
• 10 years of relevant experience
• NYS licensed PE with experience in civil structural and geotechnical engineering
• Demonstrated experience in conducting and analyzing geotechnical investigations including soil borings lab testing and bearing capacity calculations. This includes familiarity with the geotechnical requirements of the NYS Building Code.
• Verifiable experience with subsurface utility engineering (SUE) and interpreting utility company records. The engineer should be experienced with trenching and excavation plans in accordance with safety regulations and best practices.
• Verifiable experience in structural analysis and design of communication towers including self-supporting guyed and monopole structures.
• Practical experience in the design inspection and construction of concrete foundations including familiarity with different foundation types used for communication towers.
• Ability to conduct site observations during construction to ensure that the work is performed in substantial conformance with the approved plans.
• Ability to review and assess project documents and deliverables for quality accuracy and completeness. This includes detailed inspection of code requirements and design specifications.
• Willing and able to evaluate a project objectively and completely reporting findings without bias.
• Excellent written and oral communication skills necessary to prepare high-quality reports for both technical and non-technical stakeholders and to participate in project meetings.
• Capacity to proactively identify project risks analyze impacts and recommend strategies for mitigation.
• Ability to work collaboratively with both the client and the contractor(s) fostering a team-oriented approach.
• High degree of meticulousness for reviewing documentation and other project artifacts.