Assembler/Tester B - 2nd shift (Repair & Overhaul) - Los Angeles, CA
Assembler/Tester B - 2nd shift (Repair & Overhaul) - Los Angeles, CA
Posted on :
23-05-2025
Employer Active
1 Vacancy
Job Alert
You will be updated with latest job alerts via emailValid email field required
Send jobs
Share
Send me jobs like this
Job Alert
You will be updated with latest job alerts via emailValid email field required
Send jobs
Monthly Salary
Not Disclosed
Salary Not Disclosed
Vacancy
1 Vacancy
Posted on :
23-05-2025
Job Description
ATTENTION MILITARY AFFILIATED JOB SEEKERS Our organization works with partner companies to source qualified talent for their open roles. The following position is available toVeterans Transitioning Military National Guard and Reserve Members Military Spouses Wounded Warriors and their Caregivers. If you have the required skill set education requirements and experience please click the submit button and follow the next steps. Unless specifically stated otherwise this role is OnSite at the location detailed in the job post.
Eatons IS AER FMC division is currently seeking a Assembler/Tester B 2nd shift (Repair & Overhaul). Add sentence or two about what the business does/manufactures.
The hourly rate for this position is 27.95 35.88 per hour. The hours for second shift are as follows; 1:45 pm 10:15 pm.
Salaries are based upon candidate skills experience and qualifications as well as market and business considerations.
What youll do:
Assemble teardown and test routine mechanical assemblies subassemblies and top assemblies of simple to moderate product line that includes commercial and military.
Reports to the Production Supervisor/Manager in CSO. Will also receive direction from department lead.
ESSENTIAL FUNCTIONS:
Teardown assembly and test of mechanical assemblies subassemblies and top assemblies. Ensure activities are performed correctly and proper tooling and documentation is used. Requires little to no supervision.
Organize data and prepare test reports.
Perform lock wire/safety wire and nameplate
Proactively identifies best practices and assists in process improvements.
Must have the ability to utilize hand tools such as but not limited to pliers wrenches screwdrivers arbor press vises soldering iron depth micrometers calipers lockwire pliers dial indicators pressure gauges flow meters multimeters test boxes or specialized test equipment as needed.
Proficient interpreting blueprints wiring diagrams testing schematics verbal and/or written instructions.
Perform cross training when required.
Material preparation including lapping of surfaces with proper tooling techniques and compounds.
Perform visual inspection and identify any defective items and handle according to established procedures.
Use test equipment to perform in process testing and final Acceptance Test Procedures (ATPs) and Component Maintenance Manual (CMM).
Assists in process improvements
May retrieve items from stockroom
Adhere to operational procedures and ensure tooling is in calibration before use.
Maintain clean and safe work area. Adhere to all safety rules and regulations
Other duties as assigned. May be temporarily reassigned to cover workload in other areas of production as necessary.
Additional Qualifications/Responsibilities
Qualifications:
SPECIALIZED KNOWLEDGE:
Basic Qualifications:
High school diploma GED or equivalent from an accredited institution is required.
Minimum of 2 years in assembly within a manufacturing aerospace or military environment.
Minimum of 2 years of testing one or more of the following: mechanical hydraulic pneumatic or electromechanical assemblies.
No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles CA facility will be considered for this position.
Legally authorized to work in the United States without company sponsorship now or in the future.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen U.S. Permanent Resident (i.e. Green Card Holder) Political Asylee or Refugee.
Eaton will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO.
Preferred Qualifications:
Minimum of 2 years prior test experience of hydraulic and electromechanical actuators and working knowledge or hydraulic test equipment
Electrostatic Discharge (ESD) certification
Associates degree in technical field.
Soldering experience
A&P License
Experience working in an FAA environment
Physical Requirements:
Sitting standing walking squatting
Pulling frequently reaching frequently
Lifting/Carrying: Knees Waist
Lifting requirements: Ability to lift up to 50lbs (group lifts over 35lbs)
Eatons IS AER FMC division is currently seeking a Assembler/Tester B 2nd shift (Repair & Overhaul). Add sentence or two about what the business does/manufactures.
The hourly rate for this position is 27.95 35.88 per hour. The hours for second shift are as follows; 1:45 pm 10:15 pm.
Salaries are based upon candidate skills experience and qualifications as well as market and business considerations.
What youll do:
Assemble teardown and test routine mechanical assemblies subassemblies and top assemblies of simple to moderate product line that includes commercial and military.
Reports to the Production Supervisor/Manager in CSO. Will also receive direction from department lead.
ESSENTIAL FUNCTIONS:
Teardown assembly and test of mechanical assemblies subassemblies and top assemblies. Ensure activities are performed correctly and proper tooling and documentation is used. Requires little to no supervision.
Organize data and prepare test reports.
Perform lock wire/safety wire and nameplate
Proactively identifies best practices and assists in process improvements.
Must have the ability to utilize hand tools such as but not limited to pliers wrenches screwdrivers arbor press vises soldering iron depth micrometers calipers lockwire pliers dial indicators pressure gauges flow meters multimeters test boxes or specialized test equipment as needed.
Proficient interpreting blueprints wiring diagrams testing schematics verbal and/or written instructions.
Perform cross training when required.
Material preparation including lapping of surfaces with proper tooling techniques and compounds.
Perform visual inspection and identify any defective items and handle according to established procedures.
Use test equipment to perform in process testing and final Acceptance Test Procedures (ATPs) and Component Maintenance Manual (CMM).
Assists in process improvements
May retrieve items from stockroom
Adhere to operational procedures and ensure tooling is in calibration before use.
Maintain clean and safe work area. Adhere to all safety rules and regulations
Other duties as assigned. May be temporarily reassigned to cover workload in other areas of production as necessary.
Additional Qualifications/Responsibilities
Qualifications:
SPECIALIZED KNOWLEDGE:
Basic Qualifications:
High school diploma GED or equivalent from an accredited institution is required.
Minimum of 2 years in assembly within a manufacturing aerospace or military environment.
Minimum of 2 years of testing one or more of the following: mechanical hydraulic pneumatic or electromechanical assemblies.
No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles CA facility will be considered for this position.
Legally authorized to work in the United States without company sponsorship now or in the future.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen U.S. Permanent Resident (i.e. Green Card Holder) Political Asylee or Refugee.
Eaton will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO.
Preferred Qualifications:
Minimum of 2 years prior test experience of hydraulic and electromechanical actuators and working knowledge or hydraulic test equipment
Electrostatic Discharge (ESD) certification
Associates degree in technical field.
Soldering experience
A&P License
Experience working in an FAA environment
Physical Requirements:
Sitting standing walking squatting
Pulling frequently reaching frequently
Lifting/Carrying: Knees Waist
Lifting requirements: Ability to lift up to 50lbs (group lifts over 35lbs)
Employment Type
Part-Time
Key Skills
Report This Job
Disclaimer: Drjobpro.com is only a platform that connects job seekers and employers. Applicants are advised to conduct their own independent research into the credentials of the prospective employer.We always make certain that our clients do not endorse any request for money payments, thus we advise against sharing any personal or bank-related information with any third party. If you suspect fraud or malpractice, please contact us via contact us page.
