Senior Electrical Engineer

Senior Electrical Engineer (CT)

高级电子电气工程师CT等医疗设备或者机床行业优先考虑

Job Description:

• Following the V-model you will be responsible for the development of computer-related hardware products complete machine systems and supporting component solutions. By integrating internal and external R&D achievements with cutting-edge technologies you will oversee the overall system architecture and underlying hardware design to deliver product solutions that meet business and user requirements. 遵循 V 开发模型负责计算机相关硬件产品整机系统及配套方案组件开发结合内外研发成果与前沿技术开展设计统筹整机系统全局与硬件内部底层架构设计产出贴合业务及用户需求的产品方案

Your Role:

Hardware Development & Architecture: Lead the analysis testing troubleshooting and documentation of internal or supplier electrical systems and/or sub-systems. Lead the development of modeling simulation and analysis. Produce design requirements and designs for electrical systems and/or sub-systems. 硬件开发与架构设计 主导内部或供应商电气系统及/或子系统的分析测试故障排查和文档编制主导建模仿真和分析的开发工作制定电气系统及/或子系统的设计需求与设计方案

High-Speed Rotation Hardware Development: Lead the electrical design and optimization of high-speed rotating systems (e.g. CT slip rings machine tool spindles). Be responsible for dynamic electrical connection solutions high-speed signal transmission power distribution and ensuring system stability under high-speed rotation conditions. 高速旋转硬件开发 主导高速旋转系统如 CT 滑环机床主轴的电气设计与优化负责动态电气连接方案高速信号传输电源分配并确保系统在高速旋转条件下的稳定性

Failure Analysis & Root Cause Investigation: Act as the technical lead for complex hardware failures. Conduct systematic Failure Analysis (FA) on PCBA sub-systems and electrical components using methodologies such as 8D 5-Why and advanced diagnostic tools to perform fault localization physical characterization and root cause determination. 失效分析与根本原因调查 担任复杂硬件故障的技术负责人运用 8D5-Why 和 FTA 等方法对 PCBA子系统和电气组件进行系统性的失效分析FA利用高级诊断工具进行故障定位物理特征分析并确定根本原因

Problem Solving & Reliability Improvement: Resolve a wide range of issues in imaginative as well as practical ways. Support the development of Design for Reliability (DFR) and Design for Testability (DFT) methodologies. Translate failure analysis findings into actionable design improvements process optimizations and corrective/preventive actions (CAPA) to enhance overall product reliability. 问题解决与可靠性提升 以富有创新且务实的方式解决各类问题支持开发可靠性设计DFR和可测试性设计DFT方法将失效分析结果转化为切实可行的设计改进工艺优化以及纠正/预防措施CAPA以提升产品的整体可靠性

Cross-Functional Technical Support: Actively participate with all cross-hardware units and/or cross-functional teams. Provide expert technical support for the investigation analysis and resolution of NPI production and customer field technical issues.

跨部门技术支持 积极参与各硬件部门及/或跨职能团队的工作为新产品导入NPI生产制造以及客户端现场技术问题的调查分析和解决提供专家级技术支持

Project & Team Leadership: Self-manage projects and tasks and deliver to deadlines. Develop reasonable task estimates and practice risk mitigation. Actively mentor/coach less experienced employees and take on team lead feature lead or technical lead positions on smaller features or projects. 项目与团队领导 能够自我管理项目和任务并确保按期交付制定合理的任务评估并落实风险缓解措施积极指导/辅导经验较少的员工并在较小的功能或项目中担任团队负责人功能负责人或技术负责人

Youre the right fit if:

任职要求

• Bachelors degree and above in Electronics or Electrical Engineering. 电子工程或电气工程相关专业学士及以上学历

• More than 8 years of proven ability to design & develop electrical solutions including 6 years of proven ability to design & develop motion control solutions. 8 年以上电气解决方案设计与开发的成熟经验其中包括 6 年以上运动控制解决方案设计与开发经验

• Knowledge of electric drive and servo control. 熟悉电驱动与伺服控制技术Familiar with the control principles of common electrical components and electrical circuits and be able to complete the electrical diagram design independently. 熟悉常见电气元件及电气电路的控制原理能够独立完成电气原理图设计

• Strong knowledge in analog/audio/digital circuit design. 精通模拟/音频/数字电路设计

• Capable of AC-DC power supply or high voltage inverter design capability and familiar with PWM control algorithm. 具备交直流AC-DC电源或高压逆变器设计能力熟悉 PWM 控制算法

• Basic FPGA application development capabilities. 具备基础的 FPGA 应用开发能力

• Preferably 10-layer PCB design experience with interface standards and electronic component selection capabilities. 优先具备 10 层 PCB 设计经验熟悉接口标准及电子元器件选型

• Working knowledge of designing to IEC 60601 and IPC-610 & IPC-620 standards. 熟悉 IEC 60601IPC-610 及 IPC-620 标准的设计要求

• Product development process and good knowledge in ISO13485 (preferred). 了解产品开发流程熟悉 ISO13485 体系者优先

• Ability to work collaboratively in a cross-functional cross-site organization able to provide technical support for the investigation analysis and resolution of production and customer technical issues and good communication skills. 能够在跨职能跨地域的组织中协同工作具备良好的沟通能力能够为生产制造及客户端技术问题的调查分析和解决提供技术支持

• Structured problem analysis and solving. 具备结构化的问题分析与解决能力

• Strong written verbal and interpersonal skills while communicating in both English and. Chinese. 具备出色的中英文书面口头表达及人际交往能力

• Professional in AUTOCAD or SOLIDWORKS drawing software. 熟练使用 AUTOCAD 或 SOLIDWORKS 绘图软件

• Better understanding in electrical part and PCBA reliability design/test. 深入理解电气部件及 PCBA 的可靠性设计与测试

• Experienced in PCBA/sub-system level EMC design/test. 具备 PCBA/子系统级别的 EMC电磁兼容设计与测试经验

How we work together
We believe that we are better together than apart. For our office-based teams this means working in-person at least 4 days per week.
Onsite roles require full-time presence in the companys facilities.
Field roles are most effectively done outside of the companys main facilities generally at the customers or suppliers locations.
Indicate if this role is an office/field/onsite role.

About Philips
We are a health technology company. We built our entire company around the belief that every human matters and we wont stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
Learn more about our business.
Discover our rich and exciting history.
Learn more about our purpose.
If youre interested in this role and have many but not all of the experiences needed we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our culture of impact with care here.