Piping Inspector API 570

JOB Overview

Perform third-party inspection of in-service and new piping systems at Ras Laffan Industrial City. Verify compliance with API 570 ASME B31.3 and applicable client standards. Assess piping integrity review inspection data and provide authoritative inspection sign-off.

KEY DUTIES

Piping Inspection Execution

Inspect process piping systems for:

• Wall loss internal corrosion erosion and flow-accelerated corrosion (FAC)
• Corrosion Under Insulation (CUI) especially on carbon steel and low alloy lines
• Mechanical damage dents gouges cuts and deformation
• Cracking fatigue stress corrosion cracking (SCC) and thermal fatigue
• Perform external visual inspection of piping circuits including pipe supports hangers and guides.
• Identify dead legs stagnant zones and other high-risk locations for corrosion.

Documentation & Record Review

• Review piping isometrics P&IDs and inspection history records.
• Verify line numbers material specifications design conditions and service fluids.
• Cross-reference inspection data with previous records to identify trends.

NDT Witnessing & Acceptance

Witness and accept NDT inspections including:

• UT Thickness spot readings profile scans and C-scan mapping
• Radiography (RT) film interpretation for welds and corrosion
• Visual (VT) for surface defects fit-up and coating condition
• Ensure NDT techniques equipment and personnel certifications meet code and client requirements.
• Review and accept NDT reports with sign-off authority.

Repair & Alteration Oversight

Review and approve piping repair/alteration procedures including:

• Weld repair procedures (WPS/PQR)
• Installation of repair sleeves or clamps
• Pipe replacement scopes
• Verify post-repair NDT and pressure testing (hydrotest/pneumatic) when required.

Corrosion Assessment & Remaining Life

Calculate corrosion rates using historical thickness data.

• Next inspection dates and intervals (per API 574)
• Inspection methods and locations for future campaigns
• Determine remaining life and recommend:
• Identify piping circuits requiring RBI (Risk-Based Inspection) reassessment.

Non-Conformance & Quality Control

Issue non-conformance reports (NCRs) for:

• Non-compliant inspection findings
• Substandard repairs or unacceptable damage
• Missing or incorrect documentation
• Follow up on NCR close-out and verify corrective actions are implemented.

MINIMUM REQUIREMENTS

Mandatory Certification

• Valid API 570 (Piping Inspector) certification mandatory and active.

Experience

• Minimum 5 years of piping inspection experience in oil & gas / petrochemical industry.
• At least 2 years of experience in in-service piping inspection (corrosion monitoring CUI damage mechanisms).
• Experience with new construction piping (witnessing hydrotest NDT and final sign-off) is an advantage.

Technical Knowledge

• ASME B31.3 Process Piping (design fabrication inspection testing)
• API 571 Damage mechanisms affecting piping (CUI HIC SCC etc.)
• API 574 Inspection practices for piping systems
• API 578 Positive Material Identification (PMI) requirements

Qualifications

• API 580 / 581 Risk-Based Inspection
• CSWIP 3.1 / AWS CWI Welding Inspector
• ASNT NDT Level II in UT or RT
• IRATA Rope Access Level 1 or 2