Hardware engineer

Rabat - المغرب

الراتب شهرياً: لم يكشف

تاريخ النشر: نُشرت قبل 3 ساعة

عدد الوظائف الشاغرة: 1 عدد الوظائف الشاغرة

سجل للتقديم

ملخص الوظيفة

Track and implement requirements:
Identify and implement internal and external requirements.
Review Lessons Learned from previous Model Year or equivalent models with similar components and technology
Deliver a High-Quality Design on Time
Coordinate and execute development verification activities
Execute prototype testing and rework using laboratory equipment such as Programmable electronic load oscilloscopes logical analyzer climatic chambers
Identify risks on tests performed impact and mitigation plan in coordination with project leader.
Release documentation During Development phase to engineering teams (SW Mechanical): i.e. HITS (Hardware Internal Technical Specification) PCB design guidelines
Release documentation to manufacturing: End of Line specification with respect to project planning and ensure permanent updates.
Release validation documentation: EMC test plan DV/PV test plan
Implement GHAT (Generic Hardware Automatic Tester) testing for new programs in development. Creating test environment with CAPL/Python language
Deliver an Accurate and Robust Design on Time
Ensure schematic is ready according to project planning/milestones and following guidelines with checklist and DRC (Design Rule Check)
passed
Analyze critical circuits with simulation tools (OrCAD PSPICE PSIM sensitivity analysis Montecarlo analysis)
Execute review and approve WCCA (Worst Case CircuitAnalysis) with MathCAD tool.
Execute review and approve DFMEA (Design failure mode and effect analysis) embracing efficient external tools (IQ-FMEA).
Execute Variant Consistency Analysis according customer specification.
Quality Investigation

Qualifications :

Engineering degree (Masters level / Bac5) in Embedded Systems Electronics or equivalent.
Strong skills in technical coordination planning and risk management.
Excellent communication skills and team spirit.
Professional level of English required.
Knowledge of the development processes established in the organization & projects
Knowledge of industry applicable standards (i.e. Automotive SPICE AECQ JEDEC SAE MILx ISO 26262)
Knowledge of the Requirements management tools used in the organization (i.e. DOORS)
Knowledge of the change management tools used in the organization (i.e. JIRA)
Knowledge of the configuration management tools used in the organization (i.e. SVN)
Knowledge of the Hardware Development activities (WCCA with excel or Mathcad tool or similar DFMEA Schematic design with
DxDesigner main component selection)
Knowledge electronic board testing and usage of electronic laboratory equipment.
Knowledge of the Functional Safety procedures & techniques established in the organization

Informations supplémentaires :

You are rigorous creative and curious and you enjoy working as part of a team while developing your skills in a dynamic environment. You are passionate about service-oriented professions and wish to grow within a friendly and supportive work environment join us!

Remote Work :

Employment Type :

Full-time

Track and implement requirements:Identify and implement internal and external requirements.Review Lessons Learned from previous Model Year or equivalent models with similar components and technologyDeliver a High-Quality Design on TimeCoordinate and execute development verification activitiesExecute...

Track and implement requirements:
Identify and implement internal and external requirements.
Review Lessons Learned from previous Model Year or equivalent models with similar components and technology
Deliver a High-Quality Design on Time
Coordinate and execute development verification activities
Execute prototype testing and rework using laboratory equipment such as Programmable electronic load oscilloscopes logical analyzer climatic chambers
Identify risks on tests performed impact and mitigation plan in coordination with project leader.
Release documentation During Development phase to engineering teams (SW Mechanical): i.e. HITS (Hardware Internal Technical Specification) PCB design guidelines
Release documentation to manufacturing: End of Line specification with respect to project planning and ensure permanent updates.
Release validation documentation: EMC test plan DV/PV test plan
Implement GHAT (Generic Hardware Automatic Tester) testing for new programs in development. Creating test environment with CAPL/Python language
Deliver an Accurate and Robust Design on Time
Ensure schematic is ready according to project planning/milestones and following guidelines with checklist and DRC (Design Rule Check)
passed
Analyze critical circuits with simulation tools (OrCAD PSPICE PSIM sensitivity analysis Montecarlo analysis)
Execute review and approve WCCA (Worst Case CircuitAnalysis) with MathCAD tool.
Execute review and approve DFMEA (Design failure mode and effect analysis) embracing efficient external tools (IQ-FMEA).
Execute Variant Consistency Analysis according customer specification.
Quality Investigation

Qualifications :

Engineering degree (Masters level / Bac5) in Embedded Systems Electronics or equivalent.
Strong skills in technical coordination planning and risk management.
Excellent communication skills and team spirit.
Professional level of English required.
Knowledge of the development processes established in the organization & projects
Knowledge of industry applicable standards (i.e. Automotive SPICE AECQ JEDEC SAE MILx ISO 26262)
Knowledge of the Requirements management tools used in the organization (i.e. DOORS)
Knowledge of the change management tools used in the organization (i.e. JIRA)
Knowledge of the configuration management tools used in the organization (i.e. SVN)
Knowledge of the Hardware Development activities (WCCA with excel or Mathcad tool or similar DFMEA Schematic design with
DxDesigner main component selection)
Knowledge electronic board testing and usage of electronic laboratory equipment.
Knowledge of the Functional Safety procedures & techniques established in the organization

Informations supplémentaires :

Remote Work :

Employment Type :

Full-time

اعرض المزيد

المهارات المطلوبة

Arm
الهندسة الكهربائية
SOC
System Design
Firmware
C/C++
PCB
Sensors
Fpga
Digital design
Assembly
تطوير المنتجات

قدم الآن

عن الشركة

ALTEN

?? ?????????? ???????????? ???? ?????????????????????? ?????? ???? ???????????????? ALTEN is committed to meeting the expectations of its stakeholders and anticipating their requirements in the fields of innovation, R&D, and technological information systems. Founded in 1988 and pr ... اعرض المزيد

عرض صفحة الشركة عرض صفحة الشركة

التقديم التلقائي على الوظائف بـ AI

قدّم على عشرات الوظائف بنقرة واحدة