Calibration Technician

The Taleb Group in Doha Qatar is now hiring for Calibration Technician positions.

Requirements:
Have experience in the calibration field minimum 3 years Oven Weight balance weighing Bridge Length Batching plant RM Load cells Feller Guage
Have a Diploma in Metrology or any relevant qualifications

Salary: QARbased on qualification and experience.

Responsibility:
To receive the instruments for calibration from the customers.
To check the physical condition of instruments as well as functioning of instrument.
To verify the qty. and type of instruments received against customer delivery note / memo if any.
To prepare Calibration Service Request Instrument Receipt Challan
To issue copy of Calibration service request instrument receipt challan to the customer for acknowledgement of receipt of their instruments.
To paste masking tape on instrument along with the details of; Calibration service request (inward) No. (Job No. / Serial no. of particular instrument in the inward.
To place the instruments at the identified area such as Instrument received for Calibration (link removed)> To clean the instruments before calibration.
To clean the instruments with petrol and cotton waste in case of mechanical instruments.
To keep instrument in the calibration standard room atleast for 30 minutes for soaking (To bring instrument in the equilibrium condition of the standard room).
To start calibration of instruments as per the documented calibration method based on the priority of the calibration.
To ensure that the calibration methods are available where calibration activities are performed.
To record the results of calibration in the observation sheet.
To complete the calibration and to get review and approval of results recorded in the observation sheet from the Technical Manager.
To calculate uncertainty of measurement for the instruments calibrated as requested by the customer.
To enter the data of the observation sheet in the computer and prepare calibration certificate.
To get review and approval of the calibration certificate through Technical Manager / Chief Executive Officer.
To collect photocopies of masters calibration certificate used for the performing of calibration.
To attach photocopies of calibration certificates of master alongwith the calibration certificates and to place all such things in the cover.
To place instrument at the identified place in the calibration room after completion of calibration.
To deliver the instruments alongwith the calibration certificate to the customer.
To ensure that the proper records are maintained at all stages of calibration and quality assurance activities.
To prepare daily records of the mechanical / electrical / thermal discipline.
To handle the instruments throughout the calibration activities in safe and proper manner.
To monitor the accommodation and environment parameters (Such as Temperature humidity noise illumination electrical supply earthing resistance) regularly and to maintain records for the same.
To analyse the relevant records and to provide feedback to the Technical Manager against the customer complaint if any.
To do re calibration of the instruments as per the Quality assurance schedule.
To do calibration of the instrument selected for the inter laboratory comparison and to submit the results of calibration to the Technical Manager.
To prepare uncertainty budget for all calibration parameters and to ensure that the same is used periodically for uncertainty of measurement.
To identify the requirements for consumable purchase and forward it to Technical Manager.
To help Technical Manager on day to day activities.
To report to the Technical Manager on day to day functioning.
To use available resources in an optimum basis.
To reduce wastage of available resources.

Authority:
To stop the calibration activities if proper environment condition is not maintained/achieved.
To take corrective and preventive actions identified based on analysis related to the customer complaint or results of calibration.

Application:
Interested Candidates should send their latest Resume/CV with their working history and Education