Safety Rules Jobs in Clackamas, OR

MISSION:To operate all types of mold machines within department and specialize in the operation of these machines to produce complex and/or heavy wax pattern soluble and gating parts. To inspect and insure quality and dimensional integrity and adhere to guidelines. To work with limited supervision....

MISSION:To complete all steps necessary for the application of fluorescent penetrant on castings in order to prepare castings for the fluorescent penetrant inspection process; to prepare castings for evaluation by the fluorescent penetrant system.PRINCIPAL ACCOUNTABILITIES:Penetrant Line OperationOb...

SCHEDULE:Monday- Friday 6:00am-2:30pmMISSION:To identify and evaluate indications of defects in castings using fluorescent penetrant inspection methods to determine if castings meet customer specifications and PCC standards; to route rejectable castings and to identify indications for rework.PRINCIP...

Training Schedule: Monday - Friday 6:30am to 3pmMISSION:To assist air and vacuum furnace operators in the casting or master melt process. To take part in the preparation and pouring of castings or ingots as well as associated foundry tasks. Works in one or more of the following accountability areas....

MISSION:To provide entry level assistance as assigned to PCC departments including loading transporting filling scheduling assistance gathering materials equipment operation and cleaning. Learns the basic operations of the department. Job postings identify the essential job functions for the departm...

MISSION:To identify and evaluate indications of defects in castings using fluorescent penetrant inspection methods to determine if castings meet customer specifications and PCC standards; to route rejectable castings and to identify indications for rework.PRINCIPAL ACCOUNTABILITIES:Penetrant Inspect...

Schedule: Tuesday - Friday 4:00am - 2:30pmMISSION:To operate molding machines to produce small and/or less complex wax pattern and gating components of the highest quality. To inspect trim and clean wax parts as required. To train less experienced operators as assigned.PRINCIPAL ACCOUNTABILITIES:Too...

Work Schedule:Monday- Friday 6:00am - 2:30pmMISSION:To remove soluble wax used to create appropriate cavities in patterns; to dissolve wax with acids.PRINCIPAL ACCOUNTABILITIES:Pattern PreparationObjective: prepare patterns for removal of soluble wax by the leaching process.Essential Job Functions:I...

Training Schedule: Monday through Friday 3:30pm - 11:30pmWork Schedule: Monday through Friday 6:30am - 3:00pm0MISSION:To provide assistance to operators and other more skilled personnel as assigned to PCC departments including delivery staging moving and storing materials operating and cleaning equi...

Schedule: Dayshift 6am - 2:30pmMISSION: To utilize rapid prototype experience innate artistic skill and exercise attention to detail in the development and application of techniques effective to the fabrication of complex and/or intricate parts. Routinely works on prototype developmental or parts re...

CHEDULE:Training: Monday- Friday 6:00am-2:30pmWork: Monday- Friday 6:00am-2:30pm or 2:45pm-10:45pmMISSION:To inspect the work of grinders and welders in order to evaluate the quality of their work and to route and off-route castings entering the rework or leaving the grinding area; to assure the qua...

Fosters directly and indirectly by action example and training a comprehensive safety program throughout the Structurals Division at all locations. Monitors potential health and safety conditions of the workplace; identifies problems recommends solutions and ensures that the on-going safety system i...

Fosters directly and indirectly by action example and training a comprehensive safety program throughout the Structurals Division at all locations. Monitors potential health and safety conditions of the workplace; identifies problems recommends solutions and ensures that the on-going safety system i...

Work Schedule:Training Schedule: Monday through Friday 5:00am to 1:30pmWork Schedule:TBD MISSION: To provide entry level assistance as assigned to PCC departments including loading transporting filling scheduling assistance gathering materials equipment operation and cleaning. Learns the bas...

MISSION:To assemble moderately complex wax components including gating systems to produce mold forms to be invested.PRINCIPAL ACCOUNTABILITIES:Preparation.Objective: to inspect patterns and determine assembly methods.Typical Activities:Pre-inspects pattern and gating components prior to start of ass...

DEPT: 161SCHEDULE: Training: Monday- Friday 6:00am-2:30pmWork: Monday-Friday 2:45pm-10:45pmMISSION:To repair castings to meet customer specifications by replacing metal in defective areas using various welding techniques.PRINCIPAL ACCOUNTABILITIES:WeldingObjective: to weld castings to customer and P...

SCHEDULE: Dayshift 6:00am - 2:30pmPURPOSE:To provide assistance to operators and other more skilled personnel in the Rapid Prototype Department including delivery staging moving and storing materials operating and cleaning equipment; learning the basic operations of the department. Assists with comp...

SCHEDULE: Dayshift 6:00am - 2:30pmPURPOSE:To provide assistance to operators and other more skilled personnel in the Rapid Prototype Department including delivery staging moving and storing materials operating and cleaning equipment; learning the basic operations of the department. Assists with comp...

Location: SSBO (Clackamas Oregon)Work Schedule: Monday - Friday 2:30pm - 10:30pmNote: Candidates with additional qualifications and experience may be considered as a Millwright-LME.Candidates with less qualifications or experience may be considered as a Maintenance Mechanic I II or III.MISSION:To in...

Location: SSBO (Clackamas Oregon)Work Schedule: Monday - Friday 2:30pm - 10:30pmNote: Candidates with additional qualifications and experience may be considered as a Millwright-LME.Candidates with less qualifications or experience may be considered as a Maintenance Mechanic I II or III.MISSION:To in...