Electrical Installation Lead- Devices & Controls, OMHS
Job Location:
Job Location:
Erlanger, KY - USA
Monthly Salary:
Not Disclosed
Monthly Salary:
Posted on:
3 days ago
Posted on:
Vacancies:
1 Vacancy
Vacancies:
Job Summary
Amazon is seeking an Electrical Installation Lead Low Voltage Devices & Controls to drive the successful installation configuration and validation of field devices and low-voltage control systems for automation and material handling equipment across multiple greenfield and brownfield fulfillment center sites. This role provides field-based technical leadership focused specifically on low-voltage device installation sensor deployment VFD configuration E-stop systems fieldbus cabling and device commissioning readiness.
The Electrical Installation Lead Low Voltage Devices & Controls will directly manage installation crews responsible for all field device mounting wiring configuration and validation on MHE systems. This includes photo eyes proximity sensors encoders limit switches E-stop devices pull cords safety devices scanners VFDs I/O blocks zone controllers actuators operator stations stack lights and industrial communication/fieldbus cabling (Ethernet/IP Profinet EtherCAT AS-i). You will ensure all devices are installed correctly parameters are set accurately and systems are ready for controls commissioning and system energization.
This role reports to the Site Deployment Manager and follows the Power Distribution & Infrastructure lead through each zone your team mobilizes once conduit panels and heavy wire are in place. You are the last electrical installation step before controls commissioning making precision attention to detail and commissioning readiness the defining measures of success.
Location: Anywhere in the United States
Travel: Up to 50% domestic travel required; may exceed 50% with short notice
Key job responsibilities
Device Installation Leadership
Lead and manage electrical installation crews focused on low-voltage device installation and configuration for MHE systems across North American facilities
Direct installation of field devices including photo eyes proximity sensors encoders limit switches E-stop devices pull cords safety devices and barcode scanners
Oversee VFD installation mounting power connections and control wiring
Manage I/O block installation wiring and terminal connections per I/O lists and wiring diagrams
Direct installation of zone controllers actuators operator stations and stack lights
Oversee E-stop cable system installation including cable runs tensioning I-bolt and pulley placement and pull cord routing
Manage sensor mounting orientation and alignment to ensure proper detection coverage
Direct 24VDC control circuit wiring device terminations and panel-to-device connections
Oversee fieldbus and industrial communication cabling installation (Ethernet/IP Profinet EtherCAT AS-i) with attention to routing labeling addressing and termination quality
Configuration Commissioning Readiness & QC
Manage parameter setting and programming for all field devices including dip switches photo eye training sensor calibration and VFD configuration
Oversee match-mark cable connections to verify correct device-to-panel wiring
Lead electrical QC activities including I/O verification checking for shorts breaks stretched wires and confirming wire labels match drawings
Manage E-stop system testing and verification across all installed zones
Verify sensor functionality detection ranges and operational parameters before handoff to controls commissioning
Oversee side cover installation on completed conveyor sections
Manage electrical device punchlist identification and repair
Partner with controls commissioning team to validate system readiness for energization
Ensure cable management wire labeling and device labeling meet standards before zone closeout
Technical Leadership & Standards
Provide technical expertise for low-voltage control systems 24VDC circuits field devices and industrial communication networks
Review and interpret device layout drawings I/O lists wiring diagrams control panel drawings and fieldbus addressing schedules
Follow and help develop device installation standards and best practices
Create and maintain technical documentation including device installation SOPs configuration checklists and QC verification procedures
Identify troubleshoot and resolve device installation issues that may impact commissioning readiness or system functionality
Support development of scalable installation practices and field standards across multiple sites
Recommend and implement process improvements to increase device installation efficiency and first-pass quality
Coordination & Communication
Coordinate device installation activities with power distribution teams mechanical installation controls engineering IT/network teams and vendors
Manage zone sequencing with the Power Distribution & Infrastructure lead device installation begins once conduit panels and wire are in place
Coordinate with controls commissioning on energization readiness I/O verification results and open items
Track device installation progress risks blockers and quality issues escalating when support is needed
Participate in project-level technical reviews installation readiness reviews and commissioning readiness reviews
Manage relationships with device vendors OEMs integrators and internal project stakeholders
Participate in daily business reviews with installation progress and commissioning readiness updates
Maintain accurate field documentation including punch lists issue logs QC observations and turnover documentation
A day in the life
Your day starts at the site coordination meeting where you review which zones have completed power infrastructure installation and are ready for device mobilization. You walk the floor with your device crew verifying photo eye mounting positions against device layout drawings checking sensor orientation and alignment and confirming that I/O blocks are properly wired to the correct panel terminals. You oversee VFD installation and verify that dip switches and parameter settings match the configuration schedule. You check E-stop cable installation verifying proper tension I-bolt placement and pull cord routing meets Amazon safety standards. Mid-day you inspect fieldbus cabling installations verifying Ethernet/IP or Profinet routing cable labeling addressing and termination quality. By afternoon youre working with your QC crew to validate I/O verification results checking for shorts verifying wire labels match drawings confirming sensor functionality and ensuring side cover installations are complete. You coordinate with the controls commissioning team on upcoming energization zones and close out at the daily business review with readiness status and any open items.
This team is able to hire anywhere in the USA.
About the team
OneMHS (One Material Handling Systems) is Amazons in-house program for designing procuring and installing material handling equipment across its fulfillment network. Rather than relying solely on external integrators OneMHS brings the full lifecycle of MHE deployment under Amazons direct control from final engineering and equipment procurement through mechanical and electrical installation controls integration and commissioning. The program supports both greenfield builds and brownfield retrofits deploying conveyor systems sorters induction systems and robotic work cells at scale. OneMHS enables Amazon to deliver faster more cost-effective installations while maintaining higher quality and safety standards.
- Experience in engineering including a supervisory role managing people
- Experience in a fast-paced automated industrial logistics production or manufacturing environment
- 5 years of experience in industrial electrical installation controls installation automation deployment or a similar technical environment
- Experience leading or supervising electrical device installation crews controls technicians or field execution teams
- Experience reading and interpreting device layout drawings I/O lists wiring diagrams and control panel drawings
- Experience with low-voltage control systems including 24VDC circuits field devices sensors VFDs and industrial communication networks
- Ability to travel up to 50% domestically; travel may exceed 50% in some instances with short notice
- Experience of automated equipment including packaging machinery sortation and conveyor systems
- Experience in preventative maintenance systems
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status disability or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process including support for the interview or onboarding process please visit for more information. If the country/region youre applying in isnt listed please contact your Recruiting Partner.
The Electrical Installation Lead Low Voltage Devices & Controls will directly manage installation crews responsible for all field device mounting wiring configuration and validation on MHE systems. This includes photo eyes proximity sensors encoders limit switches E-stop devices pull cords safety devices scanners VFDs I/O blocks zone controllers actuators operator stations stack lights and industrial communication/fieldbus cabling (Ethernet/IP Profinet EtherCAT AS-i). You will ensure all devices are installed correctly parameters are set accurately and systems are ready for controls commissioning and system energization.
This role reports to the Site Deployment Manager and follows the Power Distribution & Infrastructure lead through each zone your team mobilizes once conduit panels and heavy wire are in place. You are the last electrical installation step before controls commissioning making precision attention to detail and commissioning readiness the defining measures of success.
Location: Anywhere in the United States
Travel: Up to 50% domestic travel required; may exceed 50% with short notice
Key job responsibilities
Device Installation Leadership
Lead and manage electrical installation crews focused on low-voltage device installation and configuration for MHE systems across North American facilities
Direct installation of field devices including photo eyes proximity sensors encoders limit switches E-stop devices pull cords safety devices and barcode scanners
Oversee VFD installation mounting power connections and control wiring
Manage I/O block installation wiring and terminal connections per I/O lists and wiring diagrams
Direct installation of zone controllers actuators operator stations and stack lights
Oversee E-stop cable system installation including cable runs tensioning I-bolt and pulley placement and pull cord routing
Manage sensor mounting orientation and alignment to ensure proper detection coverage
Direct 24VDC control circuit wiring device terminations and panel-to-device connections
Oversee fieldbus and industrial communication cabling installation (Ethernet/IP Profinet EtherCAT AS-i) with attention to routing labeling addressing and termination quality
Configuration Commissioning Readiness & QC
Manage parameter setting and programming for all field devices including dip switches photo eye training sensor calibration and VFD configuration
Oversee match-mark cable connections to verify correct device-to-panel wiring
Lead electrical QC activities including I/O verification checking for shorts breaks stretched wires and confirming wire labels match drawings
Manage E-stop system testing and verification across all installed zones
Verify sensor functionality detection ranges and operational parameters before handoff to controls commissioning
Oversee side cover installation on completed conveyor sections
Manage electrical device punchlist identification and repair
Partner with controls commissioning team to validate system readiness for energization
Ensure cable management wire labeling and device labeling meet standards before zone closeout
Technical Leadership & Standards
Provide technical expertise for low-voltage control systems 24VDC circuits field devices and industrial communication networks
Review and interpret device layout drawings I/O lists wiring diagrams control panel drawings and fieldbus addressing schedules
Follow and help develop device installation standards and best practices
Create and maintain technical documentation including device installation SOPs configuration checklists and QC verification procedures
Identify troubleshoot and resolve device installation issues that may impact commissioning readiness or system functionality
Support development of scalable installation practices and field standards across multiple sites
Recommend and implement process improvements to increase device installation efficiency and first-pass quality
Coordination & Communication
Coordinate device installation activities with power distribution teams mechanical installation controls engineering IT/network teams and vendors
Manage zone sequencing with the Power Distribution & Infrastructure lead device installation begins once conduit panels and wire are in place
Coordinate with controls commissioning on energization readiness I/O verification results and open items
Track device installation progress risks blockers and quality issues escalating when support is needed
Participate in project-level technical reviews installation readiness reviews and commissioning readiness reviews
Manage relationships with device vendors OEMs integrators and internal project stakeholders
Participate in daily business reviews with installation progress and commissioning readiness updates
Maintain accurate field documentation including punch lists issue logs QC observations and turnover documentation
A day in the life
Your day starts at the site coordination meeting where you review which zones have completed power infrastructure installation and are ready for device mobilization. You walk the floor with your device crew verifying photo eye mounting positions against device layout drawings checking sensor orientation and alignment and confirming that I/O blocks are properly wired to the correct panel terminals. You oversee VFD installation and verify that dip switches and parameter settings match the configuration schedule. You check E-stop cable installation verifying proper tension I-bolt placement and pull cord routing meets Amazon safety standards. Mid-day you inspect fieldbus cabling installations verifying Ethernet/IP or Profinet routing cable labeling addressing and termination quality. By afternoon youre working with your QC crew to validate I/O verification results checking for shorts verifying wire labels match drawings confirming sensor functionality and ensuring side cover installations are complete. You coordinate with the controls commissioning team on upcoming energization zones and close out at the daily business review with readiness status and any open items.
This team is able to hire anywhere in the USA.
About the team
OneMHS (One Material Handling Systems) is Amazons in-house program for designing procuring and installing material handling equipment across its fulfillment network. Rather than relying solely on external integrators OneMHS brings the full lifecycle of MHE deployment under Amazons direct control from final engineering and equipment procurement through mechanical and electrical installation controls integration and commissioning. The program supports both greenfield builds and brownfield retrofits deploying conveyor systems sorters induction systems and robotic work cells at scale. OneMHS enables Amazon to deliver faster more cost-effective installations while maintaining higher quality and safety standards.
- Experience in engineering including a supervisory role managing people
- Experience in a fast-paced automated industrial logistics production or manufacturing environment
- 5 years of experience in industrial electrical installation controls installation automation deployment or a similar technical environment
- Experience leading or supervising electrical device installation crews controls technicians or field execution teams
- Experience reading and interpreting device layout drawings I/O lists wiring diagrams and control panel drawings
- Experience with low-voltage control systems including 24VDC circuits field devices sensors VFDs and industrial communication networks
- Ability to travel up to 50% domestically; travel may exceed 50% in some instances with short notice
- Experience of automated equipment including packaging machinery sortation and conveyor systems
- Experience in preventative maintenance systems
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status disability or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process including support for the interview or onboarding process please visit for more information. If the country/region youre applying in isnt listed please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience qualifications and location. Amazon also offers comprehensive benefits including health insurance (medical dental vision prescription Basic Life & AD&D insurance and option for Supplemental life plans EAP Mental Health Support Medical Advice Line Flexible Spending Accounts Adoption and Surrogacy Reimbursement coverage) 401(k) matching paid time off and parental leave. Learn more about our benefits at KY Erlanger - 91800.00 - 137700.00 USD annually
USA MI CALEDONIA - 91800.00 - 137700.00 USD annually
USA MI Caledonia - 91800.00 - 137700.00 USD annually
USA MI Romulus - 91800.00 - 137700.00 USD annually
USA TN NASHVILLE - 82600.00 - 123900.00 USD annually
USA TN Nashville - 82600.00 - 123900.00 USD annually
USA TX AUSTIN - 91800.00 - 137700.00 USD annually
USA TX Austin - 91800.00 - 137700.00 USD annually
USA WA BELLEVUE - 91800.00 - 137700.00 USD annually
USA WA Bellevue - 91800.00 - 137700.00 USD annually
About Company
Free shipping on millions of items. Get the best of Shopping and Entertainment with Prime. Enjoy low prices and great deals on the largest selection of everyday essentials and other products, including fashion, home, beauty, electronics, Alexa Devices, sporting goods, toys, automotive ... View more
