Nacelle & Hub Assembly Factory Officer

Job Purpose

The Nacelle & Hub Assembly Factory Officer is responsible for supporting the establishment construction commissioning and subsequent operation of the Nacelle and Hub Assembly Factory.

3. Key Responsibilities

3.1 Construction and Factory-Development Phase

1. Participate actively in the planning design construction and operational-readiness activities of the Nacelle and Hub Assembly Factory.

2. Review factory layouts drawings and technical submissions from an operational and production perspective.

3. Verify that the factory design supports the intended nacelle and hub assembly sequence production capacity manpower flow material flow and internal logistics.

4. Coordinate with the Project Construction Manager consultants contractors OEM specialists and factory management regarding the operational requirements of the facility.

1 Review and comment on

2 Production-area layouts

3 Workstation locations

4 Assembly-line configuration

5 Material receiving and inspection areas

6 Warehouse and line-side storage areas

7 Nacelle and hub assembly zones

8 Electrical and mechanical testing areas;

9 Preservation and finished-product storage areas

10 Internal roads and logistics routes

11 Personnel and material access routes

12 Crane coverage and lifting zones

13 Equipment foundations and anchor arrangements

14 Utility connection points

15 Maintenance access

16 Emergency access and evacuation routes

17 Waste-management and housekeeping areas.

18 Identify potential conflicts between the building design equipment layout production process material movement and maintenance requirements.

19 Maintain an operational-interface register covering building civil mechanical electrical utility and production-equipment requirements.

20 Follow up construction activities that may affect factory operation including:

21 Floor levels and floor-loading capacity;

22 Equipment foundations;

23 Crane rails and lifting coverage;

24 Doors and access openings;

25 Loading and unloading areas

26 Electrical power availability

27 Compressed-air systems

28 Industrial ventilation and air conditioning;

29 Lighting levels

30 Fire-protection systems;

31 Data and communication networks;

32 Earthing systems;

33 Water and drainage;

34 Equipment maintenance access;

Storage and preservation conditions.

Conduct regular factory walkdowns with construction engineering HSE and OEM representatives.

Record construction observations operational concerns incomplete works defects and interface issues.

Prepare and maintain an action tracker for construction-related matters affecting production readiness.

Escalate construction delays design deficiencies or incomplete interfaces that may affect equipment installation commissioning or start of production.

Participate in the preparation and review of factory completion handover and operational-readiness checklists.

Support the identification and closure of construction punch-list items before factory handover.

Confirm that production areas are safe accessible and suitable for equipment installation and assembly activities.

Participate in the phased handover of factory areas from the construction team to the factory operations team.

Support coordination of temporary arrangements required during installation and commissioning including temporary power access storage lifting and contractor work areas.

Ensure that the operational requirements of the Nacelle and Hub Factory are communicated early enough to avoid costly modifications after construction.

3.2 Production Equipment Tools and Facility Equipment

1 Coordinate the identification of equipment tools fixtures and supporting systems required for nacelle and hub assembly.

2 Prepare maintain and update the factory equipment master list.

3 Coordinate with production engineers OEM specialists maintenance personnel HSE quality and procurement teams to define equipment requirements.

4 Review and provide recommendations on the selection of:

5 Assembly workstations;

6 Torque tools and hydraulic-torque systems;

7 Bolt-tensioning equipment;

8 Lifting beams spreader beams and lifting accessories;

9 Hub-assembly fixtures;

10 Nacelle assembly fixtures;

11 Rotating stands and turning devices;

12 Hydraulic tools;

Electrical testing equipment;

Mechanical testing equipment;

Alignment and measurement instruments;

Oil-filling and filtration equipment;

Greasing and lubrication systems;

Cable-processing and termination tools;

Cleaning and preservation equipment;

Mobile platforms and access systems;

Forklifts and material-handling equipment;

Tool cabinets and line-side storage systems;

Workshop equipment;

Calibration equipment;

Waste-handling equipment;

Personal protective equipment.

Assist in preparing technical specifications data sheets scopes of supply and user requirements for factory equipment.

Assess whether proposed equipment is suitable for:

The nacelle and hub design;

Component dimensions and weights;

Required production capacity;

Duqm environmental conditions;

Applicable safety requirements;

Maintenance capability;

Availability of spare parts;

Local technical support;

Future product variants;

Workforce skill level.

Provide recommendations regarding equipment quantities capacities duty classes redundancy and workstation allocation.

Review supplier quotations and technical proposals together with Engineering Procurement Quality HSE and Maintenance teams.

Participate in technical clarification meetings with equipment suppliers.

Assist in preparing technical bid evaluations and supplier-comparison tables.

Identify potential equipment suppliers and alternative technical solutions including local and international sources.

Recommend opportunities for local sourcing standardization cost optimization and reduction of long-term dependence on overseas suppliers.

1 Monitor the procurement manufacturing inspection shipment delivery and installation status of factory equipment.

2 Coordinate equipment delivery priorities with the construction and production-readiness schedules.

3 Verify that foundations utilities lifting arrangements and access routes are ready before equipment delivery.

4 Participate in factory acceptance tests pre-shipment inspections installation inspections and site acceptance tests where assigned.

5 Follow up supplier documentation including:

6 Equipment drawings;

7 Technical manuals;

8 Certificates;

9 Inspection reports;

10 Calibration certificates;

11 Spare-parts lists;

12 Recommended consumables;

13 Preventive-maintenance schedules;

14 Training materials;

15 Warranty documentation.

16 Support the preparation of equipment installation commissioning and handover records.

17 Ensure that equipment is formally handed over to the responsible factory or maintenance team.

18 Maintain an equipment deficiency and warranty-action register during installation and commissioning.

3.3 Raw Materials Components and Consumables Supply

1 Coordinate the identification and planning of raw materials components consumables and operational supplies required for nacelle and hub assembly.

2 Support the preparation and verification of bills of materials production-consumption lists and material-requirement plans.

3 Coordinate with Engineering Production Quality Warehouse Supply Chain and OEM teams to define technical requirements for materials and consumables.

4 Provide recommendations regarding appropriate materials specifications quantities storage requirements and replenishment levels.

5 Coordinate requirements for items including:

6 Fasteners bolts nuts and washers;

7 Adhesives sealants and locking compounds;

8 Lubricants oils and greases;

Hydraulic fluids;

Electrical cables and connectors;

Cable ties glands and termination materials;

Cleaning chemicals and solvents;

Paints and touch-up coating materials;

Corrosion-protection materials;

Required Skills:

Job Purpose The Nacelle & Hub Assembly Factory Officer is responsible for supporting the establishment construction commissioning and subsequent operation of the Nacelle and Hub Assembly Factory. 3. Key Responsibilities 3.1 Construction and Factory-Development Phase 1. Participate actively in the planning design construction and operational-readiness activities of the Nacelle and Hub Assembly Factory. 2. Review factory layouts drawings and technical submissions from an operational and production perspective. 3. Verify that the factory design supports the intended nacelle and hub assembly sequence production capacity manpower flow material flow and internal logistics. 4. Coordinate with the Project Construction Manager consultants contractors OEM specialists and factory management regarding the operational requirements of the facility. 1 Review and comment on 2 Production-area layouts 3 Workstation locations 4 Assembly-line configuration 5 Material receiving and inspection areas 6 Warehouse and line-side storage areas 7 Nacelle and hub assembly zones 8 Electrical and mechanical testing areas; 9 Preservation and finished-product storage areas 10 Internal roads and logistics routes 11 Personnel and material access routes 12 Crane coverage and lifting zones 13 Equipment foundations and anchor arrangements 14 Utility connection points 15 Maintenance access 16 Emergency access and evacuation routes 17 Waste-management and housekeeping areas. 18 Identify potential conflicts between the building design equipment layout production process material movement and maintenance requirements. 19 Maintain an operational-interface register covering building civil mechanical electrical utility and production-equipment requirements. 20 Follow up construction activities that may affect factory operation including: 21 Floor levels and floor-loading capacity; 22 Equipment foundations; 23 Crane rails and lifting coverage; 24 Doors and access openings; 25 Loading and unloading areas 26 Electrical power availability 27 Compressed-air systems 28 Industrial ventilation and air conditioning; 29 Lighting levels 30 Fire-protection systems; 31 Data and communication networks; 32 Earthing systems; 33 Water and drainage; 34 Equipment maintenance access; Storage and preservation conditions. Conduct regular factory walkdowns with construction engineering HSE and OEM representatives. Record construction observations operational concerns incomplete works defects and interface issues. Prepare and maintain an action tracker for construction-related matters affecting production readiness. Escalate construction delays design deficiencies or incomplete interfaces that may affect equipment installation commissioning or start of production. Participate in the preparation and review of factory completion handover and operational-readiness checklists. Support the identification and closure of construction punch-list items before factory handover. Confirm that production areas are safe accessible and suitable for equipment installation and assembly activities. Participate in the phased handover of factory areas from the construction team to the factory operations team. Support coordination of temporary arrangements required during installation and commissioning including temporary power access storage lifting and contractor work areas. Ensure that the operational requirements of the Nacelle and Hub Factory are communicated early enough to avoid costly modifications after construction. 3.2 Production Equipment Tools and Facility Equipment 1 Coordinate the identification of equipment tools fixtures and supporting systems required for nacelle and hub assembly. 2 Prepare maintain and update the factory equipment master list. 3 Coordinate with production engineers OEM specialists maintenance personnel HSE quality and procurement teams to define equipment requirements. 4 Review and provide recommendations on the selection of: 5 Assembly workstations;