Department: Maintenance
Reporting to: Maintenance Supervisor
Purpose of the position:
The Electro-Mechanical Technician will perform a variety of technical and skilled electrical and mechanic functions for the machines equipment maintenance and building repair including but not limited to light and heavy factory equipment.
The holder of this positin will also ensure that machines and equipment are available for use and consistently maintained in an optimal safe and clean condition.
Duties and responsibilities:
Install calibrate and maintain electro-mechanical systems including motors drives sensors and control units
Quickly troubleshooting and diagnosing the root causes of electrical mechanical or hydraulic failures and carrying out targeted interventions.
Interpret technical schematics wiring diagrams and mechanical blueprints
Perform preventive maintenance tasks system upgrades by identifying signs of wear performing adjustments and making necessary repairs to prevent unexpected breakdowns.
Work with PLCs and control software to configure or reset automation systems
Use measurement and diagnostic tools (e.g. multimeters calipers)
Replace and align mechanical components such as belts chains sprockets gears and actuators
Document repairs maintenance logs and component replacements
Conducting tests and calibrations to ensure machines meet performance requirements.
Collaborate with engineers contractors and technicians during installations or system integration
Ensuring all interventions conform to current regulations to guarantee user safety compliance
Requirements
Skills and Education Qualifications:
Minimum of a Diploma in Electromechanical Technology Mechatronics Electrical Mechanical or Industrial Electronics
3 to 5 years of experience in a high-volume manufacturing environment (FMCG preferred)
Proficiency in electrical diagnostics and mechanical assembly
Familiarity with PLCs (e.g. Allen-Bradley Siemens Delta) motor controllers and sensors
Ability to read and interpret wiring diagrams and mechanical schematics
Skilled in using testing equipment and mechanical hand tools
Basic welding ability on Stainless steel Mild steel and cast iron
Knowledge of safety procedures and basic electrical code compliance
Key Competencies:
Strong analytical and troubleshooting ability
Clear communication with cross-functional teams
Adaptability in fast-paced or high-volume environments
Time management and ability to prioritize tasks independently
Required Skills:
Minimum of a Diploma in Electromechanical Technology Mechatronics Electrical Mechanical or Industrial Electronics 3 to 5 years of experience in a high-volume manufacturing environment (FMCG preferred) Proficiency in electrical diagnostics and mechanical assembly Familiarity with PLCs (e.g. Allen-Bradley Siemens Delta) motor controllers and sensors Ability to read and interpret wiring diagrams and mechanical schematics Skilled in using testing equipment and mechanical hand tools Basic welding ability on Stainless steel Mild steel and cast iron Knowledge of safety procedures and basic electrical code compliance
Required Education:
Minimum of a Diploma in Electromechanical Technology Mechatronics Electrical Mechanical orIndustrial Electronics 3 to 5 years of experience in a high-volume manufacturing environment (FMCG preferred) Proficiency in electrical diagnostics and mechanical assembly Familiarity with PLCs (e.g. Allen-Bradley Siemens Delta) motor controllers and sensors Ability to read and interpret wiring diagrams and mechanical schematics Skilled in using testing equipment and mechanical hand tool
Department: MaintenanceReporting to: Maintenance SupervisorPurpose of the position:The Electro-Mechanical Technician will perform a variety of technical and skilled electrical and mechanic functions for the machines equipment maintenance and building repair including but not limited to light and hea...
Department: Maintenance
Reporting to: Maintenance Supervisor
Purpose of the position:
The Electro-Mechanical Technician will perform a variety of technical and skilled electrical and mechanic functions for the machines equipment maintenance and building repair including but not limited to light and heavy factory equipment.
The holder of this positin will also ensure that machines and equipment are available for use and consistently maintained in an optimal safe and clean condition.
Duties and responsibilities:
Install calibrate and maintain electro-mechanical systems including motors drives sensors and control units
Quickly troubleshooting and diagnosing the root causes of electrical mechanical or hydraulic failures and carrying out targeted interventions.
Interpret technical schematics wiring diagrams and mechanical blueprints
Perform preventive maintenance tasks system upgrades by identifying signs of wear performing adjustments and making necessary repairs to prevent unexpected breakdowns.
Work with PLCs and control software to configure or reset automation systems
Use measurement and diagnostic tools (e.g. multimeters calipers)
Replace and align mechanical components such as belts chains sprockets gears and actuators
Document repairs maintenance logs and component replacements
Conducting tests and calibrations to ensure machines meet performance requirements.
Collaborate with engineers contractors and technicians during installations or system integration
Ensuring all interventions conform to current regulations to guarantee user safety compliance
Requirements
Skills and Education Qualifications:
Minimum of a Diploma in Electromechanical Technology Mechatronics Electrical Mechanical or Industrial Electronics
3 to 5 years of experience in a high-volume manufacturing environment (FMCG preferred)
Proficiency in electrical diagnostics and mechanical assembly
Familiarity with PLCs (e.g. Allen-Bradley Siemens Delta) motor controllers and sensors
Ability to read and interpret wiring diagrams and mechanical schematics
Skilled in using testing equipment and mechanical hand tools
Basic welding ability on Stainless steel Mild steel and cast iron
Knowledge of safety procedures and basic electrical code compliance
Key Competencies:
Strong analytical and troubleshooting ability
Clear communication with cross-functional teams
Adaptability in fast-paced or high-volume environments
Time management and ability to prioritize tasks independently
Required Skills:
Minimum of a Diploma in Electromechanical Technology Mechatronics Electrical Mechanical or Industrial Electronics 3 to 5 years of experience in a high-volume manufacturing environment (FMCG preferred) Proficiency in electrical diagnostics and mechanical assembly Familiarity with PLCs (e.g. Allen-Bradley Siemens Delta) motor controllers and sensors Ability to read and interpret wiring diagrams and mechanical schematics Skilled in using testing equipment and mechanical hand tools Basic welding ability on Stainless steel Mild steel and cast iron Knowledge of safety procedures and basic electrical code compliance
Required Education:
Minimum of a Diploma in Electromechanical Technology Mechatronics Electrical Mechanical orIndustrial Electronics 3 to 5 years of experience in a high-volume manufacturing environment (FMCG preferred) Proficiency in electrical diagnostics and mechanical assembly Familiarity with PLCs (e.g. Allen-Bradley Siemens Delta) motor controllers and sensors Ability to read and interpret wiring diagrams and mechanical schematics Skilled in using testing equipment and mechanical hand tool
Job Location:
Monthly Salary:
Experience Required:
Posted on:
Vacancies:
