Environmental Health & Safety Manager T45 CLS Program NAS Meridian, MS

V2X is redefining the mid-level aerospace market with our agility rapid deployment capability and customized quality. Our international presence and a vast range of services distinguished us from competitors. We offer our customers a variety of global aerospace support including Systems Integration Fabrication contractor-operated and Maintained Base Supply Engineering Maintenance Modification Repair and Overhaul Training Support and all levels of Maintenance. For over forty years we have delivered high-quality aftermarket aerospace services that are affordable and customer-focused.

Principal Responsibilities and Accountabilities:

• Responsible for implementation and administration of the Environmental Health and Safety Program by all company federal state and air station directives regulations and laws.
• Reports directly to the Quality Manager on all matters.
• Develop and monitor safety and hazardous waste management programs to comply with federal state and military. Develop programs to comply with the above requirements in the absence of pre-existing programs
• Act as liaison with representatives of Base Safety Fire Department OSHA and other government organizations.
• The EHS Specialist shall possess knowledge of the Navy Fire Warden Program.
• Designated as Site Fire Warden Point Coordinator with specific responsibilities for the:
• Provision access and maintenance of waste storage and chemical storage areas.
• Routine inspection of all fire bottles and contractor held facilities.
• Post Fire Bill(s) (NAVFAC 3-11320/9) with correct building number and emergency telephone numbers in a conspicuous place and post Fire Wardens name and telephone number on unit bulletin boards.
• Observe the evacuation of assigned building(s) during emergencies and ensure personnel not assigned to a fire detail are instructed to close safes windows doors etc. and proceed to the nearest exit without delay. Fire Wardens will be required to take the online annual refresher training in the Navy program of record or attend an onsite annual Fire Warden training that specializes on developing and improving fire prevention skills.
• Ensure buildings are numbered with facility numbers. Position the number(s) on opposite corners of the structure so they are visible from at least two directions. If required place work request with Public Works to provide numbers. Size and color of numbers for buildings will comply with existing regulations.
• Assist the Fire Inspector during formal inspections to ensure adequacy of the inspection program.
• Represent the company during inspections and audits including corporate EH&S audits AMMT inspections ordnance inspections Navy Crane Center inspections etc. Recommends appropriate corrective action for any discrepancies identified.
• Monitor safety trends and construction projects on company-occupied facilities to recognize problem or hazard areas. Recommend corrective action to management.
• Formulate recommendations and justifications to management to validate the need for additional/ replacement tools equipment supplies facility modifications procedures and training requirements to ensure a quality product and a safe work environment.
• Works with subject matter experts to develop new or modify old safety equipment as needed to support our employees.
• Conduct work site surveys and daily facility inspections to ensure facility and procedural compliance with applicable regulations.
• Responsible for the establishment and maintenance of all required records and reports applicable to safety and hazardous waste programs.
• Manage and control the Respiratory Protection Program.
• Coordinate the use and care of personal protective equipment etc. Ensure adequate quantities of PPE are available.
• Monitor investigations of all incidents/accidents and recommend corrective actions.
• Investigate safety-related concerns and complaints reported by employees.
• Determine medical surveillance requirements for workers exposed to specific hazards by OSHA and Government/ Company requirements. Coordinate and track physical exams hearing evaluations audiometric testing and reporting requirements under the Hearing Conservation Program.
• Act as company representative at customer safety meetings.
• Coordinate the local Company Safety Committee and publish the meeting minutes and company-wide daily e-mail safety briefing.
• Assist in the development of the Chemical Waste Program develop local Maintenance Instructions and draft routine and continuing correspondence to all work centers detailing waste management procedures and requirements.
• Interface with base Public Works engineers and Government Contracts Monitoring Team to resolve problems with waste management procedures.
• Maintain working knowledge of complex and technical regulations including customers Hazardous Waste Management Plan OSHA Hazardous Material Transportation Act Resource Conservation and Recovery Act Spill Prevention Control and Countermeasures Plan Storm Water Pollution Prevention Plan and other applicable base state and federal regulations.
• Designated as On-Site Accumulation Point Coordinator with specific responsibilities:
• Provision access and maintenance of waste storage and chemical storage areas.
• Routine inspection of all waste storage areas to ensure compliance with storage requirements.
• Prepare and submit disposal turn-in documents.
• Ensure proper marking labeling and sealing of chemical waste containers.
• Determine the type and quantities of safety and emergency equipment required and submit purchase orders as required
• Prepare and manage a Spill Contingency Plan including the control of waste in emergencies i.e. fire hurricane etc.
• Responsible for the establishment and maintenance of all required records including a Chemical Waste Log Inspection Reports Chemical Inventories and Safety Data Sheets.
• Assist in the development of the Chemical Waste Program and local Maintenance Instructions. Draft routine and continuing correspondence to all work centers detailing waste management procedures and requirements.
• Accompany Government personnel (base officials EPA Inspectors etc.) when at contractor facilities.
• Monitor workers assigned to assist in waste preparation and disposal.
• Ensure training of personnel involved in waste disposal and handling.
• Assist in reviewing and developing maintenance instructions quality procedures etc.
• Maintain company safety bulletin boards.
• Periodically monitor the aircraft move crew when operating inside the hangar.
• Be thoroughly familiar with all requirements contained in government Instructions manuals and procedures that relate to the assignment of aircraft for scheduled missions.
• Maintain cleanliness of the work center and around your assigned work area.
• Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract facilities and job assignment.
• Document work accomplished on government and company electronic and/or manual Information Systems
• Assist in ensuring the safety security inventory and preservation of Government-owned and company-owned equipment.
• Ensure compliance with established Maintenance/Work Instructions and Company policies/procedures.
• Provide data for Government CDRLs (reports) as required by Contract.
• Must have an extensive working knowledge of COMNAVAIRFORINST 4790.2 series OPNAV 3750 series applicable ISO Federal Aviation Regulations and Navy Instructions.
• Must be able to utilize card files and common office equipment.
• Responsible for adherence to and enforcement of the Tool Control Program.
• Responsible for adherence to and enforcement of the FOD Prevention Program.
• Adhere to and enforce all Company and Government regulations to ensure personnel safety and the security and preservation of Government and Company-owned equipment.
• Ensure compliance with required Quality Control policies and inspections.
• Perform all other position-related duties as well as other projects and initiatives as assigned.
• Maintains the highest ethical personal and professional standards

Position Scope and Charter

• Must show a certificate of satisfactory completion of U.S. Armed Forces Hazardous Waste courses or civilian schools with equivalent curriculum or two (2) years of verifiable on-the-job training/experience required.
• Must possess and maintain working knowledge of complex and technical regulations including customers Hazardous Waste Management Plan OSHA Hazardous Material Transportation Act Resource Conservation and Recovery Act and other applicable base state and federal regulations.
• Must posses or be able to complete course Afor Respiratory Protection Program Manger
• GSE licensing as required.
• Airfield operator license as required.
• Valid state operator license
• Must be able to obtain and maintain a DoD security clearance.
• Must meet any other qualification standards imposed by the government contract not covered by this agreement.
• Proficiency in Excel and PowerPoint to generate compile analyze and evaluate facts and data using statistical and research methodologies
• Must have excellent written and verbal communication skills and be able to effectively communicate using a two-way radio and/or intercom system.
• Must have the ability to develop professional relationships with management peers vendors subcontractors and customers
• Must be able to work weekends other shifts and overtime as required.
• Must be able to maintain confidentiality of sensitive information and Company proprietary data.
• Must adhere to Company policies/procedures and management instructions.
• Limited travel may be required.

Physical Requirements

• Must be able to work in a variety of environments including office aircraft hangar aircraft flight line and warehouse. Must be able to walk for long distances moving from one work site to another to monitor/inspect conditions. At times one must be able to climb bend kneel crouch balance and stoop. Must be able to lift/maneuver up to 50 pounds. Must be able to work in extreme heat and cold. Will be subject to noise and hazards such as proximity to moving mechanical parts moving vehicles and aircraft electrical current and working on maintenance stands and high places. Subject to atmospheric conditions such as fumes odors mists gases or poor ventilation. Must be able to work in narrow passageways. Must have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Must be able to communicate effectively.

• Benefits include the following:
• Healthcare coverage
• Retirement plan
• Life insurance AD&D and disability benefits
• Wellness programs
• Paid time off including holidays
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company consistent with the terms of any applicable compensation or benefit plans.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about discussed or disclosed their own pay or the pay of another employee or applicant. However employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information unless the disclosure is (a) in response to a formal complaint or charge (b) in furtherance of an investigation proceeding hearing or action including an investigation conducted by the employer or (c) consistent with the contractors legal duty to furnish information. 41 CFR 60-1.35(c)

Required Experience:

Manager