| Position Summary: | Join the forefront of innovation at the University of Dayton Research Institute (UDRI) where cutting-edge research meets real-world impact. Our Advanced Manufacturing division seeks a talented **Additive Repair Engineer**. Position Summary: This position will support the Additive Repair Technologies Group in the Advance Manufacturing Division. The position will serve as a repair engineer for the CS technologies group developing test plans reports and repair procedures. The successful candidate will understand cold spray repair equipment and repair set-up and pre- and post-processing. This role will build and execute material test matrix on cold spray as well as assisting in developing novel testing methods. The majority of work will support government customers. |
|---|
| Minimum Qualifications: | BS in Engineering (Mechanical Aerospace Industrial Materials or Chemical Engineering or related engineering field)
2 years of experience working with Design of Experiments
A minimum of three (3) years of directly related experience is required at the R2 level
Proven ability to create read and interpret models technical drawings schematics and computer-generated reports
Proven experience in processing cold spray samples for metallurgical analysis
Working knowledge of materials testing standards and procedures
Proficient in 3D CAD modeling software and ability to generate drawing in accordance with ASTM Y14.5
Experience with Solid Works PDM
Proficient in Excel and other MS Office Suite programs
Due to the requirements of our research contracts with the U.S. federal government candidates for this position must be a U.S. citizen |
|---|
| Preferred Qualifications: | While not everyone may possess all of the preferred qualifications the ideal candidate will bring many of the following: Bachelors degree (Mechanical or Aerospace Engineering or related engineering field).
Masters degree (Materials Engineering)
6 years of experience with creating and executing component and system level validation and qualification test plans as well as analysis of test data and results
3 years experience with Solidworks 3D CAD modeling.
Experience with process documents generation for quality standards such as ISO9001 or AS9100
Effective interpersonal communication skills demonstrated at all levels of an organization
Self-motivated & organized with ability to work with minimal supervision
Demonstrated successful collaboration within a multi-disciplinary team
Demonstrated problem solving and time management skills
Experience in technical writing and technical proposal documentation and creation |
|---|
| Special Instructions to Applicants: | To apply please submit a cover letter addressing each minimum qualification and any applicable preferred qualifications that you meet. |
|---|
| Closing Statement: | Informed by its Catholic and Marianist mission the University is committed to the dignity of every human being. Informed by this commitment we seek to increase diversity in all of its forms achieve fair outcomes and model inclusion across our campus community. The University is committed to policies of affirmative action designed to increase the employment opportunities of individuals with disabilities and protected veterans in compliance with the Rehabilitation Act of 1973 and Vietnam Era Veterans Readjustment Assistance Act of 1973. |
|---|
Required Experience:
IC
Position Summary:Join the forefront of innovation at the University of Dayton Research Institute (UDRI) where cutting-edge research meets real-world impact. Our Advanced Manufacturing division seeks a talented **Additive Repair Engineer**.Position Summary: This position will support the Additive Rep...
| Position Summary: | Join the forefront of innovation at the University of Dayton Research Institute (UDRI) where cutting-edge research meets real-world impact. Our Advanced Manufacturing division seeks a talented **Additive Repair Engineer**. Position Summary: This position will support the Additive Repair Technologies Group in the Advance Manufacturing Division. The position will serve as a repair engineer for the CS technologies group developing test plans reports and repair procedures. The successful candidate will understand cold spray repair equipment and repair set-up and pre- and post-processing. This role will build and execute material test matrix on cold spray as well as assisting in developing novel testing methods. The majority of work will support government customers. |
|---|
| Minimum Qualifications: | BS in Engineering (Mechanical Aerospace Industrial Materials or Chemical Engineering or related engineering field)
2 years of experience working with Design of Experiments
A minimum of three (3) years of directly related experience is required at the R2 level
Proven ability to create read and interpret models technical drawings schematics and computer-generated reports
Proven experience in processing cold spray samples for metallurgical analysis
Working knowledge of materials testing standards and procedures
Proficient in 3D CAD modeling software and ability to generate drawing in accordance with ASTM Y14.5
Experience with Solid Works PDM
Proficient in Excel and other MS Office Suite programs
Due to the requirements of our research contracts with the U.S. federal government candidates for this position must be a U.S. citizen |
|---|
| Preferred Qualifications: | While not everyone may possess all of the preferred qualifications the ideal candidate will bring many of the following: Bachelors degree (Mechanical or Aerospace Engineering or related engineering field).
Masters degree (Materials Engineering)
6 years of experience with creating and executing component and system level validation and qualification test plans as well as analysis of test data and results
3 years experience with Solidworks 3D CAD modeling.
Experience with process documents generation for quality standards such as ISO9001 or AS9100
Effective interpersonal communication skills demonstrated at all levels of an organization
Self-motivated & organized with ability to work with minimal supervision
Demonstrated successful collaboration within a multi-disciplinary team
Demonstrated problem solving and time management skills
Experience in technical writing and technical proposal documentation and creation |
|---|
| Special Instructions to Applicants: | To apply please submit a cover letter addressing each minimum qualification and any applicable preferred qualifications that you meet. |
|---|
| Closing Statement: | Informed by its Catholic and Marianist mission the University is committed to the dignity of every human being. Informed by this commitment we seek to increase diversity in all of its forms achieve fair outcomes and model inclusion across our campus community. The University is committed to policies of affirmative action designed to increase the employment opportunities of individuals with disabilities and protected veterans in compliance with the Rehabilitation Act of 1973 and Vietnam Era Veterans Readjustment Assistance Act of 1973. |
|---|
Required Experience:
IC
View more
View less
Job Location:
Monthly Salary:
Not Disclosed
Posted on:
Yesterday
Vacancies:
1 Vacancy
