Pipe Welder

North Kingstown, RI - USA

Monthly Salary: Not Disclosed

Experience Required: 5years

Posted on: 3 hours ago

Vacancies: 1 Vacancy

Job Summary

We work nationwide on some of the most challenging exciting construction and maintenance projects in the industrial sector. We are currently hiring skilled pipe welders with experience across multiple sites in the US. If you are a hardworking person with the skills and ability to perform the job outlined below we would love to hear from you!

Essential Functions of this position may include but are not limited to:

Pipe welders should be qualified to perform 100% x-ray quality welds on chromes/stainless/Inconel/carbon/ nickel copper/copper nickel using GTAW process.
Work in other crafts at levels appropriate to training and skills as requested by project supervision.
Assist with joint fit-up and final weld joint alignment to include some rigging and lifting if necessary.
Ideal candidates will be proficient with SMAW/STICK GTAW/TIG 6G position
Performs welding processes on pipe; manual standard bevel
Plan lay out weld install and repair all types of pipe and similar tubular products in accordance with applicable plans specifications welding codes and industry standards utilizing a variety of handwelding or flamecutting equipment.
Use appropriate hand (i.e. wrap around files) and power tools (i.e. cutting torch) to properly measure cut assemble weld and install all types of structural steel components; install supports valves and other control equipment; test installed systems and install all other related items in accordance with the applicable plans and specifications; must be familiar with properties of metal machining weld shrinkage and welding techniques; bolts clamps or other welding related equipment; weld components according to specific process and code; and install all other items in accordance with the applicable plans and specifications. Weld components in flat vertical horizontal or overhead positions. Clamp hold tackweld heatbend grind or bolt component parts to obtain required configurations and positions for welding.
Must be able to set up the machine including safely running lines and be able to adjust gas flow and pressure so that desired flames are obtained. Knowledge of the operation of welding equipment electrodes fluxes shielded gases and welding processes.
Must be able to weld with a mirror.
Requires occasional working in a confined space work environment with the potential of extreme temperature exposure chemical exposure and radiation exposure during an 8-to-12-hour shift.
Welds on site must pass quality audits on a continuous basis.
Knowledge of carbon steel stainless steel copper nickel nickel copper Inconel and other alloy metals.
Understand support and follow lockout/tagout procedures. Attend site-specific training and ensure you follow all procedures as outlined in training.
Follow established safety rules and regulations and maintain a safe and clean work environment.
Use effective verbal and written communication skills. Add subtract multiply and divide whole numbers and fractions rapidly and accurately.
Produce quality work meeting the requirements of plans specifications and industry standards.
Read and understand plans and specifications including diagrams prints orthographic and isometric drawings and visualize two dimensional drawings in three dimensions.
Comply with the Company Code of Conduct and job site policies.
Perform all other job-related duties as requested by the supervisor.
Experience in submarine piping is a plus.

Please note that the essential job functions listed above are not intended to be all-encompassing. Employees may be asked to perform tasks that are not listed in this description but may also be considered essential for employment.

Requirements

Qualification education and experience requirements:

At least five years of pipe welding experience or an equivalent combination of education and experience in an industrial or shipyard setting.
Must pass the welding test on the specific procedures and welding code that is to be performed on the project.
Must have a strong working knowledge of the pipe welder craft and various welding codes and specifications.
Experience with EB ring consumable inserts is highly preferred.
Ability to understand and follow directions.

Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to: Practical skills COVID-19 other medical psychological (if required by site) background and substance abuse screening.

Weld Test Requirements:

GTAW welding of 1 Inconel butt weld with MIL-82H consumable insert ring and MIL-RN82H filler wire.
GTAW welding of 1 carbon steel butt weld with MIL-MS-2 consumable insert ring and ER70S-3 filler wire.
GTAW welding of 2 - CRES socket welds (4F/5F positions) with MIL-RN82H Inconel filler wire.
GTAW welding of 2 - carbon steel socket welds (4F/5F positions) with ER70S-3 filler wire.
All tests are restricted in accordance with NAVSEA Technical Publication S9074-AQ-GIB-010/248 Figure 21.

Physical Requirements:

* Lift and carry heavy items weighing up to 50 pounds.

* Stand Kneel Bend Stoop move in and around confined and cluttered places and uneven areas see and hear naturally or with correction.

* Full range of motion and flexibility consistent with requirements of the job duties.

* Requires using hands to handle control or feel objects tools or controls according to a set procedure.

* Requires repetitive movement.

* Climb and maintain balance on steel framework stairs ladders and scaffolds.

* Work up to a 12-hour shift doing hard physical labor in varying temperature extremes and other outside conditions.

Work Environment:

* Typical construction site environment

* Requires working in cramped workspaces and getting into awkward positions.

* Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust wind snow rain etc.

* Requires working in extremely bright or inadequate lighting conditions

* Includes exposure to sounds and noise levels that are distracting or uncomfortable.

* Work around hazardous equipment.

Citizenship/ Work Authorization Requirements:

Proof of Identification - Drivers license or any other identification card issued by the federal state or local government that contains a photograph and the persons name date of birth gender height eye color and street address.
Must be a citizen of the US its possessions or territories or a lawful permanent resident as defined by USC 1101(a)(20) or a protected individual as defined by USC 1324b(a)(3)

Proof of US Citizenship (must provide one)

U.S. birth certificate (birth documents issued by a hospital notifications of birth registrations) and Puerto Rico birth certificates issued before July 1 2010 are not accepted
Valid unexpired U.S. passport or U.S. passport card
U.S. Certificate of Citizenship or Certificate of Naturalization
A record of Military Processing-Armed Forces of the United States (Form DD 1966) provided it reflects U.S. citizenship.

Required Skills:

Qualification education and experience requirements: At least five years of pipe welding experience or an equivalent combination of education and experience in an industrial or shipyard setting. Must pass the welding test on the specific procedures and welding code that is to be performed on the project. Must have a strong working knowledge of the pipe welder craft and various welding codes and specifications. Experience with EB ring consumable inserts is highly preferred. Ability to understand and follow directions. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to: Practical skills COVID-19 other medical psychological (if required by site) background and substance abuse screening. Weld Test Requirements: GTAW welding of 1 Inconel butt weld with MIL-82H consumable insert ring and MIL-RN82H filler wire. GTAW welding of 1 carbon steel butt weld with MIL-MS-2 consumable insert ring and ER70S-3 filler wire. GTAW welding of 2 - CRES socket welds (4F/5F positions) with MIL-RN82H Inconel filler wire. GTAW welding of 2 - carbon steel socket welds (4F/5F positions) with ER70S-3 filler wire. All tests are restricted in accordance with NAVSEA Technical Publication S9074-AQ-GIB-010/248 Figure 21. Physical Requirements: * Lift and carry heavy items weighing up to 50 pounds. * Stand Kneel Bend Stoop move in and around confined and cluttered places and uneven areas see and hear naturally or with correction. * Full range of motion and flexibility consistent with requirements of the job duties. * Requires using hands to handle control or feel objects tools or controls according to a set procedure. * Requires repetitive movement. * Climb and maintain balance on steel framework stairs ladders and scaffolds. * Work up to a 12-hour shift doing hard physical labor in varying temperature extremes and other outside conditions. Work Environment: * Typical construction site environment * Requires working in cramped workspaces and getting into awkward positions. * Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust wind snow rain etc. * Requires working in extremely bright or inadequate lighting conditions * Includes exposure to sounds and noise levels that are distracting or uncomfortable. * Work around hazardous equipment. Citizenship/ Work Authorization Requirements: Proof of Identification - Drivers license or any other identification card issued by the federal state or local government that contains a photograph and the persons name date of birth gender height eye color and street address. Must be a citizen of the US its possessions or territories or a lawful permanent resident as defined by USC 1101(a)(20) or a protected individual as defined by USC 1324b(a)(3) Proof of US Citizenship (must provide one) U.S. birth certificate (birth documents issued by a hospital notifications of birth registrations) and Puerto Rico birth certificates issued before July 1 2010 are not accepted Valid unexpired U.S. passport or U.S. passport card U.S. Certificate of Citizenship or Certificate of Naturalization A record of Military Processing-Armed Forces of the United States (Form DD 1966) provided it reflects U.S. citizenship.