Machinist

Depending upon the assignment duties may include but are not limited to the following:

• Perform precise repair maintenance and installation work on a variety of waterworks and City facilities.
• Set up and operate a variety of stationary and portable machine tools such as metal lathes mills drill presses grinders and other machine shop equipment in manufacturing fabricating and repairing machinery and equipment such as large industrial pumps compressors hydraulic equipment motors valves chlorinators clarifiers gauges chemical feeders engines hoists and blowers.
• Utilize troubleshooting equipment and procedures for vibration monitoring of rotating machinery.
• Cut and shape metal to precise dimensions within close tolerances.
• Sharpen and repair machine shop tools.
• May assist with training and directing work of new and lower-level staff; make certain proper safety precautions are followed.
• Install dismantle maintain inspect and repair equipment used with water gas oil chemical heating and sewage systems.
• Observe and listen to operating machines or equipment to diagnose malfunctions and determine need for adjustment or repairs.
• Work from sketches drawings blueprints and written or verbal instructions; prepares scaled sketches of work to be performed and/or documented.
• Perform acetylene tungsten inert gas metal inert gas and electric arc welding and cutting operations.
• Maintain and manufacture parts for mechanical systems of water treatment drainage and wastewater facilities.
• Maintain HVAC systems and air dryers.
• Install pipe-lines valves chemical feeders screens gates tanks and bases.
• Make concrete forms; mix and pour concrete for installation or repair of equipment or facilities.
• Operate machinery to load and unload trucks carrying hazardous materials; work on operating systems containing hazardous materials.
• Drive and operate trucks and trailers dump trucks and cranes with a Gross Vehicle Weight Rating (GVWR) under 26000 pounds.
• Perform load planning and load rigging functions.
• Write reports and maintain records of projects and maintenance.
• Write and complete corrective and preventative maintenance work orders including any root cause analysis results related to equipment failures.
• Coordinate with internal and external staff to ensure proper facility operations.
• Respond to emergencies on an on-call or standby basis as required.
• Performs other or related duties as assigned.

Knowledge of:

• Standard practices materials tools and methods of the Machinists trade.
• Mechanics shop mathematics metal properties layout and machining procedures.
• Occupational hazards and safety requirements of the trade.
• Qualities adaptabilities and uses of a variety of metals and alloys.
• Welding techniques and practices.
• Modern predictive maintenance tooling and asset management procedures.

• Perform a wide range of machinist and mechanical repair and maintenance activities using standard methods and equipment.
• Interpret and work from sketches plans blueprints and worn or broken parts.
• Do precision work within close tolerances.
• Diagnose and troubleshoot problems in operating machinery.
• Work in confined spaces on temporary scaffolding on high structures and in sewage wet pits.
• Recognize and deal with hazardous situations.
• Read and write the English language at a level necessary for efficient job performance.
• Estimate labor and materials for proposed work and keep complete and accurate records.
• Use computerized maintenance management software (CMMS).
• Work in high pressure situations.
• Work effectively with others.

• Setting up and operating a variety of machine tools and equipment.
• The care and maintenance of machine tools and equipment.
• Diagnoses of problems in machinery.
• The repair of a variety of machinery equipment and facilities.
• Use of standard hand electric and pneumatic tools of the mechanical trades.
• Oral and written communications.

COMPARABLE CLASSIFICATION SPECIFICATION

To see the classification specification for the comparable classification of Machinist Helper please click here.

SPECIAL QUALIFICATIONS

Driver License:

Possession of a valid California Class C Driver License at the time of appointment. Individuals who do not meet this requirement due to physical disability will be reviewed on a case-by-case basis. Loss of the Class C license is cause for discipline.

Certifications:

Possession of a Water Distribution Operator Grade II Certification issued by the State of California is highly desirable.

Respiratory Protective Equipment:

Work in this class requires wearing respiratory protective equipment at times. When assigned to such work facial hair must be shaven when it interferes with the safe fitting of respiratory protective equipment.

Residency Requirement:

Employees in this classification must reside within thirty-five (35) air miles from the freeway interchange at W-X Streets 29th - 30th Streets within one year following appointment.

PROBATIONARY PERIOD:

Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status.

Please note the City of Sacramentos preferred method of communication with applicants is via e-mail. As such please ensure you verify the e-mail address on your application and check your e-mailfrequently including your spam and junk folders. All e-mail notifications can also be accessed through the applicant inbox.

1. Application:(Pass/Fail) All applicants must complete and submit online a City of Sacramento employment application to the Employment Office by the final filing deadline;

• Employment applications must be submitted online; paper applications will not be accepted.
• Employment applications will be considered incomplete and will be disqualified:
  • If applicants do not list current and past job-related experience in the duties area of the Work Experience section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week).
  • If see resume is noted in the Work Experience section; a resume will not substitute for the information required in the Work Experience section.
• Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position.
• If youre requesting Veterans credit a copy of your DD214 must be submitted onlinewith your application or emailed to the Employment Office by the final filing deadline. Information regarding the use of Veterans credit can be found in the Civil Service Board rules under rule 4.9C.
• Applicants are responsible for attaching a copy of their DD214 to each position for which they apply.

3. Screening For Most Qualified:(Pass/Fail) In the event of a large candidate pool each candidates Work Experience section of the application will be evaluated and rated. Only those candidates determined to be the most qualifiedwill proceed to the next step in the selection process. A resume will not substitute for the information required in the Work Experience section of the application.

4. Performance Test: (Weighted 100%) Qualified candidates will be notified by email of the test date time and location approximately one to two weeks prior to the test. The performance test will be job related and may include but not limited to the knowledge and abilities as outlined above. The performance exam will be administered in English only.

TEST EXEMPTION - If you have previously taken the Machinist exam within the past year of the final filing date of this postingyou may be considered exempt from taking the Machinist Exam.

The City of Sacramentos Human Resources Department will verify applicants eligibility at the time of the final filing deadline of this job posting.

5. Eligibility - Candidates who pass the performance test will be placed on an eligible list. The hiring department may contact those on the eligible list for an interview at any time during the life of the one-year list. Candidates eligibility expires year from the date of notification of a passing score for the Machinist examination. Candidates can take the examination at any time to maintain eligibility.

• If you are currently on an active eligible list for the Machinist classification it is unnecessary to retake the examination.
• The eligible list is effective one year from the date of passing the examination for the Machinist.
• If you are hired from the eligible list you will no longer have active status on the eligible list per Civil Service Board Rule 5.7(i). Applicants interested in maintaining their eligibility will need to take and pass the exam after their hire date.

QUESTIONS:
For questions concerning this job announcement and the application process:

• Please visit for a comprehensive step-by-step guide to the application process.
• For technical support between 6 AM - 5 PM PT contact Live Applicant Support at .
• Visit the City of Sacramento Human Resources Department website at
• Send an email to ;
• Call the Human Resources Department at