| Are you looking to take your career to new heights with a leader in healthcare SUNY Downstate Health Sciences University is one of the nations leading metropolitan medical centers. As the only academic medical center in Brooklyn we serve a large population that is among the most diverse in the world. We are also highly-ranked by Castle Connolly Medical a healthcare rating company for consumers among the top 5 leading U.S. medical schools for training doctors. |
Bargaining Unit: | CSEA |
Job Summary: | The Department of Facilities Management and Development at SUNY Downstate Health Sciences University is seeking a full-time Trades Specialist (Plumber/Steamfitter). Trades Specialists (Plumber & Steamfitter) perform journey-level plumbing and steamfitting work and may supervise others in the installation alteration and repair of pipes fittings and fixtures of heating ventilating heating control water and drainage systems according to specifications and plumbing codes. Illustrative Tasks - Repairs maintains and installs plumbing fixtures and appliances such as sinks shower baths commodes drinking fountains dishwashers valves including pneumatic controls gas and water meters gas hot water heaters and other gas appliances heating systems and controls and various steam equipment used in laundries kitchens and cafeterias water pumps irrigation and hydrotherapy equipment.
- In cases of malfunction or breakdown discusses problem with user visually inspects the fixtures or equipment and uses appropriate test equipment such as pressure and vacuum gauges to determine cause and location of trouble.
- Following technical manuals codes diagrams and previous experience plans work procedures to make repairs and orders replacement parts indicating quality and type and any other materials required.
- Makes necessary repairs or adjustments or directs others in performing such activities.
- Installs or directs the installation of plumbing fixtures and appliances following diagrams codes and previous experience.
- Plans and lays out the installation alteration and repair of high- and low-pressure pipe systems that carry water steam air or other liquids or gases.
- Plans new installations alterations to existing installations and major repairs consistent with specifications plans and plumbing codes.
- Reviews building plans and working drawings to determine work aids required and sequence of installation.
- Locates and marks position of pipes pipe connections and passage holes for pipes in walls and floors and cuts openings required to accommodate pipes and fittings.
- According to plan measures cuts threads and bends pipe to required angle.
- Assembles and installs a variety of metal and nonmetal pipe and pipe fittings.
- Joins piping by means of threaded caulked wiped soldered brazed fused or cemented joints.
- Tests pipe system for leaks by filling with liquid or air and reading pressure gauges.
- May weld holding fixtures to steel members.
- May draw rough sketches or prepare plans to scale from oral or written instructions to accomplish the project.
- From blueprints or specifications may estimate labor materials tools and equipment necessary for the project.
- Assembles materials tools and equipment required to complete the work according to plans.
- May supervise and instruct others in performing plumbing and steamfitting work; Assigns work to plumbing crew.
- Gives verbal instructions and/or demonstrates proper plumbing techniques and the use of plumbing and steamfitting tools and equipment.
- Observes and inspects the work while in progress and when completed to ensure that the work is done properly.
|
Required Qualifications: | - Non-competitive: 4 years of full-time experience in plumbing under a skilled tradesperson which would provide training equivalent to that given in a training apprenticeship or equivalent program or an equivalent combination of experience and training gained by completion of technical courses in plumbing at a school institute or branch of the Armed Services;
- OR successful completion of the two-year Trades Specialist (Plumber & Steamfitter) traineeship or a two-year plumbing training apprenticeship or equivalent program* such as the New York State Civil Service Employees Association-Partnership Applied Skilled Trades Traineeship and Certificate Program.
(* Successful completion of the traineeship and the training program includes a total of 288 hours of trade-specific class room instruction 45 hours of technical math course work 45 hours of technical communications course work and 15 hours of blueprint/schematic reading course work. Course work must be completed with an average of C or better. Additionally successful completion of the traineeship also includes 4000 hours of on-the-job training.) |
Preferred Qualifications: | |
55 B/C QUALIFICATIONS:
| - Individuals certified eligible for the 55 B/C program under the Governors Program to Hire Persons/Veterans with Disabilities pursuant to Section 55 B/C of the Civil Service Law will also be considered. To be considered you must provide a copy of your letter of eligibility with your response.
- It is essential that candidates clearly and concisely indicate exactly how they meet the above minimum qualifications in their resume. Failure to show how you meet the minimum qualifications above may result in disqualification and removal from consideration.
|
Work Schedule: | Variable Days; 7:30am to 4:00pm(Full-Time) |
Salary Grade/Rank: | SG-12 |
Salary Range: | As per civil service guidelines |
Executive Order: | Pursuant to Executive Order 161 no State entity as defined by the Executive Order is permitted to ask or mandate in any form that an applicant for employment provide his or her current compensation or any prior compensation history until such time as the applicant is extended a conditional offer of employment with compensation. If such information has been requested from you before such time please contact the Governors Office of Employee Relations ator via email at. |
Equal Employment Opportunity Statement: | SUNY Downstate Health Sciences University is an affirmative action equal opportunity employer and does not discriminate on the basis of race color national origin religion creed age disability sex gender identity or expression sexual orientation familial status pregnancy predisposing genetic characteristics military status domestic violence victim status criminal conviction and all other protected classes under federal or state laws. Women minorities veterans individualswith disabilities and members of underrepresented groups are encouraged to apply. If you are an individual with a disability and need a reasonable accommodation for any part of the application process or in order to perform the essential functions of a position please contactHuman Resources at . |
Required Experience:
IC
Are you looking to take your career to new heights with a leader in healthcare SUNY Downstate Health Sciences University is one of the nations leading metropolitan medical centers. As the only academic medical center in Brooklyn we serve a large population that is among the most diverse in the world...
| Are you looking to take your career to new heights with a leader in healthcare SUNY Downstate Health Sciences University is one of the nations leading metropolitan medical centers. As the only academic medical center in Brooklyn we serve a large population that is among the most diverse in the world. We are also highly-ranked by Castle Connolly Medical a healthcare rating company for consumers among the top 5 leading U.S. medical schools for training doctors. |
Bargaining Unit: | CSEA |
Job Summary: | The Department of Facilities Management and Development at SUNY Downstate Health Sciences University is seeking a full-time Trades Specialist (Plumber/Steamfitter). Trades Specialists (Plumber & Steamfitter) perform journey-level plumbing and steamfitting work and may supervise others in the installation alteration and repair of pipes fittings and fixtures of heating ventilating heating control water and drainage systems according to specifications and plumbing codes. Illustrative Tasks - Repairs maintains and installs plumbing fixtures and appliances such as sinks shower baths commodes drinking fountains dishwashers valves including pneumatic controls gas and water meters gas hot water heaters and other gas appliances heating systems and controls and various steam equipment used in laundries kitchens and cafeterias water pumps irrigation and hydrotherapy equipment.
- In cases of malfunction or breakdown discusses problem with user visually inspects the fixtures or equipment and uses appropriate test equipment such as pressure and vacuum gauges to determine cause and location of trouble.
- Following technical manuals codes diagrams and previous experience plans work procedures to make repairs and orders replacement parts indicating quality and type and any other materials required.
- Makes necessary repairs or adjustments or directs others in performing such activities.
- Installs or directs the installation of plumbing fixtures and appliances following diagrams codes and previous experience.
- Plans and lays out the installation alteration and repair of high- and low-pressure pipe systems that carry water steam air or other liquids or gases.
- Plans new installations alterations to existing installations and major repairs consistent with specifications plans and plumbing codes.
- Reviews building plans and working drawings to determine work aids required and sequence of installation.
- Locates and marks position of pipes pipe connections and passage holes for pipes in walls and floors and cuts openings required to accommodate pipes and fittings.
- According to plan measures cuts threads and bends pipe to required angle.
- Assembles and installs a variety of metal and nonmetal pipe and pipe fittings.
- Joins piping by means of threaded caulked wiped soldered brazed fused or cemented joints.
- Tests pipe system for leaks by filling with liquid or air and reading pressure gauges.
- May weld holding fixtures to steel members.
- May draw rough sketches or prepare plans to scale from oral or written instructions to accomplish the project.
- From blueprints or specifications may estimate labor materials tools and equipment necessary for the project.
- Assembles materials tools and equipment required to complete the work according to plans.
- May supervise and instruct others in performing plumbing and steamfitting work; Assigns work to plumbing crew.
- Gives verbal instructions and/or demonstrates proper plumbing techniques and the use of plumbing and steamfitting tools and equipment.
- Observes and inspects the work while in progress and when completed to ensure that the work is done properly.
|
Required Qualifications: | - Non-competitive: 4 years of full-time experience in plumbing under a skilled tradesperson which would provide training equivalent to that given in a training apprenticeship or equivalent program or an equivalent combination of experience and training gained by completion of technical courses in plumbing at a school institute or branch of the Armed Services;
- OR successful completion of the two-year Trades Specialist (Plumber & Steamfitter) traineeship or a two-year plumbing training apprenticeship or equivalent program* such as the New York State Civil Service Employees Association-Partnership Applied Skilled Trades Traineeship and Certificate Program.
(* Successful completion of the traineeship and the training program includes a total of 288 hours of trade-specific class room instruction 45 hours of technical math course work 45 hours of technical communications course work and 15 hours of blueprint/schematic reading course work. Course work must be completed with an average of C or better. Additionally successful completion of the traineeship also includes 4000 hours of on-the-job training.) |
Preferred Qualifications: | |
55 B/C QUALIFICATIONS:
| - Individuals certified eligible for the 55 B/C program under the Governors Program to Hire Persons/Veterans with Disabilities pursuant to Section 55 B/C of the Civil Service Law will also be considered. To be considered you must provide a copy of your letter of eligibility with your response.
- It is essential that candidates clearly and concisely indicate exactly how they meet the above minimum qualifications in their resume. Failure to show how you meet the minimum qualifications above may result in disqualification and removal from consideration.
|
Work Schedule: | Variable Days; 7:30am to 4:00pm(Full-Time) |
Salary Grade/Rank: | SG-12 |
Salary Range: | As per civil service guidelines |
Executive Order: | Pursuant to Executive Order 161 no State entity as defined by the Executive Order is permitted to ask or mandate in any form that an applicant for employment provide his or her current compensation or any prior compensation history until such time as the applicant is extended a conditional offer of employment with compensation. If such information has been requested from you before such time please contact the Governors Office of Employee Relations ator via email at. |
Equal Employment Opportunity Statement: | SUNY Downstate Health Sciences University is an affirmative action equal opportunity employer and does not discriminate on the basis of race color national origin religion creed age disability sex gender identity or expression sexual orientation familial status pregnancy predisposing genetic characteristics military status domestic violence victim status criminal conviction and all other protected classes under federal or state laws. Women minorities veterans individualswith disabilities and members of underrepresented groups are encouraged to apply. If you are an individual with a disability and need a reasonable accommodation for any part of the application process or in order to perform the essential functions of a position please contactHuman Resources at . |
Required Experience:
IC
View more
View less