Position Summary |
Plan and conduct work requiring judgment in the independent evaluation selection and substantial adaptation and modification of standard techniques procedures and criteria. Devise new approaches to problems encountered. Develop and sustain electrical products offered by the company. |
Job Functions/Duties (may be assigned other duties by management) |
- Work as a key resource in the Manufacturing department generating innovative ideas and engineering solutions to support our downhole electrical/electronic products aimed for oil and gas production wells
- Be the primary Engineering support of our Electronic and Motor Lead Extension manufacturing to resolve issues with manufacturing testing or operation of electrical products
- Develop assembly and testing procedures for motor leads electronic assemblies and their sub-components/systems
- Propose create and implement solutions to support electronic manufacturing operations
- Develop assembly fixtures or tooling to allow expedient and safe processing of orders through manufacturing
- Maintain software that controls our electronics testing stations (C# preferred)
- Read and understand electrical schematics for the purpose of troubleshooting issues with products
- Work with suppliers to specify appropriate components and suitable substitutes for electronic products
- Manage multiple projects or issues taking responsibility for on time and on budget delivery of proven design solutions
- Perform analysis to verify effectiveness and suitability of proposed design solutions
- Exercise of judgment is required on details of work in making selections and adaptations of engineering alternatives and in making decisions about project management and scheduling
- Generate test plans and contribute in test equipment design verification
- Carry out any necessary test programs to ensure reliability and sustainability of the product
- Compile engineering reports and present data where necessary to the management team
- Work within defined parameters to make decisions and apply concepts to issues of moderate complexity
- Resolve issues through immediate action or short-term planning
- Generate Bill of Material for the assigned project and prepare Quality Control Plan
- Support fabrication of equipment including troubleshooting product improvement and product inspection
- Personally observe safety and security procedures and proper use of equipment and material. Actively promote safety processes and report any safety issues to proper channels for action.
|
Qualifications/Education Requirements |
- Proficient computer skills with knowledge of MS Office and/or company specific databases
- Ability to read and understand electrical circuit diagrams
- Ability to use multimeters and other test equipment to troubleshoot malfunctioning electronics
- Circuit design and PCB layout experience optional but preferred
- Experience with software development (C# preferred)
- Understanding of basic mechanical engineering concepts and mechanical aptitude
- Proficient in programing of electronics and electrical devices
- Good oral and written communication and analytical skills
- Ability to handle multiple projects simultaneously with stringent deadlines and working in an environment which requires flexibility innovation superb customer service skills and organization
- Understanding of both theories and principles
- Ability and willingness to learn new skills as required
- Bachelors degree or higher in Electrical or Mechanical Engineering required
- Minimum of 5 years in electrical engineering role in design or manufacturing required
- Willingness or interest in international relocation is preferred but not required
|
Working Conditions & Physical Requirements |
- Normal office environment and exposure to test well environment
- Working in test well with high voltage and pressure equipment
- Routinely required to move about the facility
- Occasional travel and on call required
- Use of personal protective equipment is mandatory
- This is a safety sensitive position
|
Required Experience:
IC
Position SummaryPlan and conduct work requiring judgment in the independent evaluation selection and substantial adaptation and modification of standard techniques procedures and criteria. Devise new approaches to problems encountered. Develop and sustain electrical products offered by the company.J...
Position Summary |
Plan and conduct work requiring judgment in the independent evaluation selection and substantial adaptation and modification of standard techniques procedures and criteria. Devise new approaches to problems encountered. Develop and sustain electrical products offered by the company. |
Job Functions/Duties (may be assigned other duties by management) |
- Work as a key resource in the Manufacturing department generating innovative ideas and engineering solutions to support our downhole electrical/electronic products aimed for oil and gas production wells
- Be the primary Engineering support of our Electronic and Motor Lead Extension manufacturing to resolve issues with manufacturing testing or operation of electrical products
- Develop assembly and testing procedures for motor leads electronic assemblies and their sub-components/systems
- Propose create and implement solutions to support electronic manufacturing operations
- Develop assembly fixtures or tooling to allow expedient and safe processing of orders through manufacturing
- Maintain software that controls our electronics testing stations (C# preferred)
- Read and understand electrical schematics for the purpose of troubleshooting issues with products
- Work with suppliers to specify appropriate components and suitable substitutes for electronic products
- Manage multiple projects or issues taking responsibility for on time and on budget delivery of proven design solutions
- Perform analysis to verify effectiveness and suitability of proposed design solutions
- Exercise of judgment is required on details of work in making selections and adaptations of engineering alternatives and in making decisions about project management and scheduling
- Generate test plans and contribute in test equipment design verification
- Carry out any necessary test programs to ensure reliability and sustainability of the product
- Compile engineering reports and present data where necessary to the management team
- Work within defined parameters to make decisions and apply concepts to issues of moderate complexity
- Resolve issues through immediate action or short-term planning
- Generate Bill of Material for the assigned project and prepare Quality Control Plan
- Support fabrication of equipment including troubleshooting product improvement and product inspection
- Personally observe safety and security procedures and proper use of equipment and material. Actively promote safety processes and report any safety issues to proper channels for action.
|
Qualifications/Education Requirements |
- Proficient computer skills with knowledge of MS Office and/or company specific databases
- Ability to read and understand electrical circuit diagrams
- Ability to use multimeters and other test equipment to troubleshoot malfunctioning electronics
- Circuit design and PCB layout experience optional but preferred
- Experience with software development (C# preferred)
- Understanding of basic mechanical engineering concepts and mechanical aptitude
- Proficient in programing of electronics and electrical devices
- Good oral and written communication and analytical skills
- Ability to handle multiple projects simultaneously with stringent deadlines and working in an environment which requires flexibility innovation superb customer service skills and organization
- Understanding of both theories and principles
- Ability and willingness to learn new skills as required
- Bachelors degree or higher in Electrical or Mechanical Engineering required
- Minimum of 5 years in electrical engineering role in design or manufacturing required
- Willingness or interest in international relocation is preferred but not required
|
Working Conditions & Physical Requirements |
- Normal office environment and exposure to test well environment
- Working in test well with high voltage and pressure equipment
- Routinely required to move about the facility
- Occasional travel and on call required
- Use of personal protective equipment is mandatory
- This is a safety sensitive position
|
Required Experience:
IC
View more
View less
Job Location:
Yearly Salary:
Posted on:
Yesterday
Vacancies:
1 Vacancy
