Summary:
The Final Assembly I technician plays a critical role in assembling heavy-duty backup power systems. Working in areas such as Tank Prep Engine Prep and Engine Finish this position involves installing components interpreting blueprints and ensuring high-quality builds of custom enclosures for diesel turbine generators. This hands-on role supports production continuity and client reliability during power outages.
Accountabilities:- Install generator components including exhaust piping fuel lines and air/hydraulic lines.
- Assemble fuel system components such as air tubes breathers heat shields dosing systems and urea tanks.
- Mount generator hardware including isolators battery racks engine rails and drain lines.
- Install radiator systems and fill with coolant.
- Secure generator and housing units to tanks according to specifications.
- Use hand tools power tools and equipment such as grinders die grinders crimpers and impact tools.
- Operate forklifts and scissor lifts (certification required).
- Complete assigned tasks including general prep door hardware fuel systems and battery rack installation.
- Read and interpret engineering drawings and blueprints.
- Follow specific safety requirements and regulations for the assigned work area.
- Report near misses and potential danger areas to maintain a safe work environment.
- Maintain a clean and organized work area.
- Collaborate with team members and supervisors to meet production goals.
- Perform other duties as assigned to support the final assembly team.
|
| Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. |
| Attributes |
- Safety First: Follows all safety protocols reports hazards and ensures a safe working environment.
- Have Humanity: Works respectfully and collaboratively with team members to meet production goals.
- Be Transparent: Communicates clearly about task progress challenges and safety concerns.
- Drive Innovation: Suggests improvements to assembly processes and tools to enhance efficiency.
- Be Resilient: Adapts to changing priorities and production demands with a positive attitude.
- Always Reliable: Consistently completes tasks with accuracy and attention to detail.
- Grit: Tackles physically demanding tasks with persistence and pride in craftsmanship.
Required Knowledge/Experience:- High school diploma or equivalent required.
- 12 years of mechanical experience preferred.
- Ability to read blueprints and use a tape measure accurately.
- Forklift and scissor lift certification preferred.
- Basic welding and plumbing knowledge is beneficial.
- Familiarity with engineering drawings and mechanical systems.
- Strong mechanical aptitude and attention to detail.
- Reliable responsible and respectful team player.
- Must wear required personal protective equipment (PPE) and follow all safety protocols.
|
| Work Environment and Physical Demands |
- FLSA executive and professional positions paid on a salary basis where project requirements and tight client deadlines may require workweeks over forty (40) hours (including weekends or holidays).
- This role is primarily based in a manufacturing environment with exposure to indoor and outdoor conditions.
- Mobility: Ability to stand kneel stoop or crouch for 810 hours per day.
- Manual Dexterity: Frequent use of hands to handle tools and components.
- Lifting: Must be able to lift up to 50 lbs and push/pull up to 100 lbs. All lifting should follow OSHA standards.
- Visual and Auditory Requirements: Must be able to see and hear well enough to navigate the plant safely and communicate effectively with team members.
- Must pass a background check and drug screening.
|
| Other Duties |
| Please note this job description is not designed to cover or contain a comprehensive listing of activities duties or responsibilities that are required of the employee for this job. Duties responsibilities and activities may change at any time with or without notice. |
Required Experience:
Junior IC
Summary: The Final Assembly I technician plays a critical role in assembling heavy-duty backup power systems. Working in areas such as Tank Prep Engine Prep and Engine Finish this position involves installing components interpreting blueprints and ensuring high-quality builds of custom enclosures fo...
Summary:
The Final Assembly I technician plays a critical role in assembling heavy-duty backup power systems. Working in areas such as Tank Prep Engine Prep and Engine Finish this position involves installing components interpreting blueprints and ensuring high-quality builds of custom enclosures for diesel turbine generators. This hands-on role supports production continuity and client reliability during power outages.
Accountabilities:- Install generator components including exhaust piping fuel lines and air/hydraulic lines.
- Assemble fuel system components such as air tubes breathers heat shields dosing systems and urea tanks.
- Mount generator hardware including isolators battery racks engine rails and drain lines.
- Install radiator systems and fill with coolant.
- Secure generator and housing units to tanks according to specifications.
- Use hand tools power tools and equipment such as grinders die grinders crimpers and impact tools.
- Operate forklifts and scissor lifts (certification required).
- Complete assigned tasks including general prep door hardware fuel systems and battery rack installation.
- Read and interpret engineering drawings and blueprints.
- Follow specific safety requirements and regulations for the assigned work area.
- Report near misses and potential danger areas to maintain a safe work environment.
- Maintain a clean and organized work area.
- Collaborate with team members and supervisors to meet production goals.
- Perform other duties as assigned to support the final assembly team.
|
| Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. |
| Attributes |
- Safety First: Follows all safety protocols reports hazards and ensures a safe working environment.
- Have Humanity: Works respectfully and collaboratively with team members to meet production goals.
- Be Transparent: Communicates clearly about task progress challenges and safety concerns.
- Drive Innovation: Suggests improvements to assembly processes and tools to enhance efficiency.
- Be Resilient: Adapts to changing priorities and production demands with a positive attitude.
- Always Reliable: Consistently completes tasks with accuracy and attention to detail.
- Grit: Tackles physically demanding tasks with persistence and pride in craftsmanship.
Required Knowledge/Experience:- High school diploma or equivalent required.
- 12 years of mechanical experience preferred.
- Ability to read blueprints and use a tape measure accurately.
- Forklift and scissor lift certification preferred.
- Basic welding and plumbing knowledge is beneficial.
- Familiarity with engineering drawings and mechanical systems.
- Strong mechanical aptitude and attention to detail.
- Reliable responsible and respectful team player.
- Must wear required personal protective equipment (PPE) and follow all safety protocols.
|
| Work Environment and Physical Demands |
- FLSA executive and professional positions paid on a salary basis where project requirements and tight client deadlines may require workweeks over forty (40) hours (including weekends or holidays).
- This role is primarily based in a manufacturing environment with exposure to indoor and outdoor conditions.
- Mobility: Ability to stand kneel stoop or crouch for 810 hours per day.
- Manual Dexterity: Frequent use of hands to handle tools and components.
- Lifting: Must be able to lift up to 50 lbs and push/pull up to 100 lbs. All lifting should follow OSHA standards.
- Visual and Auditory Requirements: Must be able to see and hear well enough to navigate the plant safely and communicate effectively with team members.
- Must pass a background check and drug screening.
|
| Other Duties |
| Please note this job description is not designed to cover or contain a comprehensive listing of activities duties or responsibilities that are required of the employee for this job. Duties responsibilities and activities may change at any time with or without notice. |
Required Experience:
Junior IC
View more
View less
Job Location:
Monthly Salary:
Not Disclosed
Posted on:
20 hours ago
Vacancies:
1 Vacancy
