NDT Inspector Level 3 Day Shift

Located in Kent Washington Protective Coatings Inc. is a leading provider of full service finishing for the aerospace electronics and medical industries in both commercial and defense applications. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting passivation cadmium and nickel zinc plating chromic sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Organic coating includes the application and testing of multiple resin systems such as epoxies phenolics polyurethanes polyesters elastomerics intumescents lacquers alkyds acrylics dry-film lubricants powder coatings and Teflon. Current approvals include the National Aerospace and Defense Contractors Accreditation Program (NADCAP) Boeing Commercial Aircraft Company Boeing Defense and Space Boeing/Philadelphia Boeing Long Beach Grumman Gulfstream Lockheed Martin Goodrich Bombardier Cessna and Sikorsky among much else.

Founded in 1976 Protective Coatings Inc. was later acquired by Precision Castparts in 2012 and became part of the Aerostructures Division. As a defense contractor Protective Coatings Inc. is registered with the Directorate of Defense Trade Controls as a subsidiary of Precision Castparts Corp and is fully compliant with all relevant facets of the International Traffic in Arms Regulations and the Export Administration Regulations.

Position Summary:

Candidates for NDT Inspector Level 3 will possess the skills and knowledge to perform all the duties of a trainee Level 1-Limited and Level 2 and can also independently inspect parts make evaluations perform required process tests and document results. Selected candidates as a Level 3 Inspector shall be knowledgeable in all NDT methods used by Protective Coatings and have familiarity with other NDT methods as represented in Level 3 ASNT testing. A Level 3 Inspector shall at times perform inspections on chemically treated metallic and nonmetallic parts and assemblies under fluorescent or black lighting for defects such as fissures weld breaks or fractures using magnetic particle inspection (MAG) and liquid penetrant inspection (FPI) processes and equipment. The Level 3 will be responsible for maintaining all NDT training qualification certification and performance levels of active NDT personnel. Candidates must be self-disciplined and self-motivated individuals with strong accountability (attention to details) skills. Candidates of this position must have strong leadership qualities excellent communication skills and the ability to work in a team environment. A Level 3 candidate will be expected to perform a variety of tasks and supervisory roles which include but are not limited to: performing specific calibrations tests and evaluations on production aerospace parts; perform Formal and Practical training; establish and approve written NDT procedures and work instructions; assigning and directing work. As a condition of assignment Level 3 candidates may be expected to process product controlled under in International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). As such these candidates may be required to provide proof of U.S. Citizenship Legal Permanent Residence or protected status as a Non-Citizen National of the U.S.

Primary Duties & Responsibilities:

• Supports supervision of 10-30 employees in the NDT/MAG/Penetrant areas. Carries out responsibilities in accordance with the organizations policies and applicable laws.
• Conduct or direct the training examination and certification of personnel in the method certified.
• Establish and approve NDT procedures and other NDT related work instructions for technical adequacy and compliance to requirements.
• Maintain and review NDT personnel qualification and certification files and review performance levels of active NDT personnel.
• Examines parts under fluorescent or black lighting to detect surface defects using one of two methods: FPI (Fluorescent Penetrant Inspection) or (MAG) Magnetic Particle Inspection.
• Provide detailed information concerning processing techniques findings evaluation of indications and part condition/disposition recommendations.
• Actively participate and assist in and appropriately respond to NDT system auditing (internal and external).
• Reviews NDT process Rejection Reports.
• Set up and calibrate equipment conduct tests and interpret evaluate and document inspection results.
• Will require use of personal protective equipment (PPE) during certain tasks (goggles safety glasses aprons boots gloves hearing protection etc) and be expected to comply with safety directives and policy.
• Will be exposed to chemicals/solvents and occasional fumes wet/humid conditions low-level lighting and moderate noise level.
• Will at times require heavy lifting or use of mechanical hoist for the aid in lifting objects.
• Work closely with inspectors and Management to complete work and prioritize tasks.
• Clean organize and maintain work area as prescribed by supervision.
  
  

Required Skills:

• Ability to independently perform and train personnel in all the duties of an NDT Helper (entry level position) Level 1-Limited Operator and Level 2 Inspector.
• Specific vision abilities required by this job include close vision color vision and peripheral vision. The ability to successfully pass a Jaeger eye exam with corrected or uncorrected vision.
• Familiarity of codes standards and specification such as NAS 410 BSS 7698 and BAERD GEN-012.
• Blueprint reading and interpretation skills pertaining to aerospace production detail parts and sub-assemblies.
• Basic mathematic skills: add subtract multiply and divide using whole numbers common fractions and decimals.
• Ability to interpret and explain an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables applying the mechanics of Algebra and Geometry.
• Ability to define problems collect data establish facts and draw valid conclusions.
• Basic computer skills in MS Doc and MS Excel.
• Ability to write routine reports and correspondence.
• Familiarity with CAPA (Corrective Action / Preventative Action) implementation and response.
• Ability to speak effectively before groups of customers or employees of organization.
• Good communication skills.
• Ability to work alone or as a member of a team good cooperative skills.
• Ability to read write and communicate in English. Specifically applicants must be able to read and understand written or verbal instructions.
• Ability to lift and carry up to 35 lbs.
• Demonstrated ability to work effectively in a fast paced and changing environment with multiple priorities.

Required Experience:

• Experience relative to (1) year minimum specific to non-inspection functions of the NDT department as an NDT Helper in the entry level position.
• Formal and Practical training is required for both FPI and MAG Inspection years ranging from 1-4 years in order to meet Level 3 Qualification & Certification depending on level of formal education (see below).

Level of Education:

• A combination of college technical school and/or experience requirements as outlined in PCI NDT Procedure PCP801-3 Qualification & Certification of NDT Personnel for meeting minimum specific training and certification requirements.
• Level 2 NDT Certification and Level 3 NDT Certification from the previous employer for each NDT method practiced is required.
  
  Note: Prior training and experience of acquired Level 3 Inspection status must be verified and documented in writing by the previous employer or training agency. Any claimed training and experience which cannot be verified and documented shall be considered invalid and applicant must require additional training as recommended by the Responsible Level 3. All previous training must be verified by the Responsible Level 3. Selected candidates shall be subjected to examinations administered by the Responsible Level 3 at the time of hire to verify the physical and technical qualifications of the NDT candidate. Exams will consist of a vision test a general exam a specification exam and a practical examination.