OVERALL PURPOSE OF THE ROLE
To Run Production Equipment in the most efficient effective and safest manner to meet/Surpass the target throughput as well as perform daily equipment autonomous/preventive maintenance (Daily cleaning checking lubricating & tightening to prevent deterioration)
Duties Related to the respective Key Results Areas
|
- Competently perform machine operation functions.
- Test the machine before main work begins to be sure that its in good condition for production
- Competently Perform daily equipment autonomous maintenance activities: - Daily cleaning checking lubricating and tightening to prevent deterioration. Record the results of daily inspections in the provided machine check sheets.
- Account for your Shift production by ensuring that all products are weighed and properly recorded. During local/fine points production45k or 75% of the machines target should be packed.
- Timely/real time updating of the PDS (Production data sheet) to ensure accurate capturing of all downtimes scrap and production.
- Monitor machines during production to ensure optimum running
- Periodic inspections or equipment diagnosis to measure deterioration
- Load Components into the Machine Hoppers as required
- Promptly report to the process optimizer/technician in case of any Machine malfunction and raise a works order request.
- Strictly adhere to the laid down safe working procedures while carrying out your Responsibilities-Remember Safety First in whatever you do
- Assist in performing color changeovers
- Ensure that allocated machine is producing quality products by managing periodic checks on output
- No mix-up of Components during production runs-Use the right components without fail.
- Promptly liaise with the Process Optimizer/Q.C Inspector in case of any off-spec component and ensure an internal customer complaints form is raised.
- Avoid generation of waste by doing right things first time and segregating accordingly.
- Any unavoidable waste generated should be segregated booked in the PDS and put in the respective crates.
- Use all the safety gears/PPEs provided as required.
- with all OHS/EHS stipulated rules/Regulations
- Attend and participate in daily safety briefings
- Adhere to Good Housekeeping and defined 5S practices always.
- Follow stipulated work procedures and SOPS.
- Promptly report any hazard to the shift process optimizer.
- Conduct smooth and meaningful hand over to the incoming machine operatorto be done at the workstation.
- Update all the relevant documents e.g. PDS sheets & machine check sheets.
- Promptly report any issues to the Process Optimizer
- Promptly report any issues to the Process Optimizer
- Other related duties as may be assigned to you from time to time
KEY PERFORMANCE INDICATORS (KPIs)
Adherence to production levels
Achievement of targeted production targets
Continuous improvement savings
Minimal Scrap level
Ensuring Compliance i.e. HSE policies and procedures & SOPS.
|
Requirements
- Minimum KCSE D and a certificate in Engineering or production related field
- Diploma in any production related filed is an added advantage
|
- 3 years experience as an operator
- should possess a technical diploma qualification in either Electrical or Mechanical disciplines to meet the requirements of the role.
|
- Strong knowledge of local state and federal health and safety regulations
- Strict adherence to company standards and safety procedures
- A depth understanding of business process and principles
- Attention to detail and familiarity with industrial equipment
- Excellent physical condition and coordination
|
OVERALL PURPOSE OF THE ROLETo Run Production Equipment in the most efficient effective and safest manner to meet/Surpass the target throughput as well as perform daily equipment autonomous/preventive maintenance (Daily cleaning checking lubricating & tightening to prevent deterioration)Duties Relate...
OVERALL PURPOSE OF THE ROLE
To Run Production Equipment in the most efficient effective and safest manner to meet/Surpass the target throughput as well as perform daily equipment autonomous/preventive maintenance (Daily cleaning checking lubricating & tightening to prevent deterioration)
Duties Related to the respective Key Results Areas
|
- Competently perform machine operation functions.
- Test the machine before main work begins to be sure that its in good condition for production
- Competently Perform daily equipment autonomous maintenance activities: - Daily cleaning checking lubricating and tightening to prevent deterioration. Record the results of daily inspections in the provided machine check sheets.
- Account for your Shift production by ensuring that all products are weighed and properly recorded. During local/fine points production45k or 75% of the machines target should be packed.
- Timely/real time updating of the PDS (Production data sheet) to ensure accurate capturing of all downtimes scrap and production.
- Monitor machines during production to ensure optimum running
- Periodic inspections or equipment diagnosis to measure deterioration
- Load Components into the Machine Hoppers as required
- Promptly report to the process optimizer/technician in case of any Machine malfunction and raise a works order request.
- Strictly adhere to the laid down safe working procedures while carrying out your Responsibilities-Remember Safety First in whatever you do
- Assist in performing color changeovers
- Ensure that allocated machine is producing quality products by managing periodic checks on output
- No mix-up of Components during production runs-Use the right components without fail.
- Promptly liaise with the Process Optimizer/Q.C Inspector in case of any off-spec component and ensure an internal customer complaints form is raised.
- Avoid generation of waste by doing right things first time and segregating accordingly.
- Any unavoidable waste generated should be segregated booked in the PDS and put in the respective crates.
- Use all the safety gears/PPEs provided as required.
- with all OHS/EHS stipulated rules/Regulations
- Attend and participate in daily safety briefings
- Adhere to Good Housekeeping and defined 5S practices always.
- Follow stipulated work procedures and SOPS.
- Promptly report any hazard to the shift process optimizer.
- Conduct smooth and meaningful hand over to the incoming machine operatorto be done at the workstation.
- Update all the relevant documents e.g. PDS sheets & machine check sheets.
- Promptly report any issues to the Process Optimizer
- Promptly report any issues to the Process Optimizer
- Other related duties as may be assigned to you from time to time
KEY PERFORMANCE INDICATORS (KPIs)
Adherence to production levels
Achievement of targeted production targets
Continuous improvement savings
Minimal Scrap level
Ensuring Compliance i.e. HSE policies and procedures & SOPS.
|
Requirements
- Minimum KCSE D and a certificate in Engineering or production related field
- Diploma in any production related filed is an added advantage
|
- 3 years experience as an operator
- should possess a technical diploma qualification in either Electrical or Mechanical disciplines to meet the requirements of the role.
|
- Strong knowledge of local state and federal health and safety regulations
- Strict adherence to company standards and safety procedures
- A depth understanding of business process and principles
- Attention to detail and familiarity with industrial equipment
- Excellent physical condition and coordination
|
View more
View less
Job Location:
Monthly Salary:
Posted on:
Yesterday
Vacancies:
1 Vacancy
