Engineer I-V, Metering & Automation (Depends on Experience)

Closing Date to Apply: Until Filled

Salary:

Engineer I:$72737.60 - $112028.80

Engineer II: $77105.60 - $118768.00

Engineer III: $91811.20 - $147804.80

Engineer IV: $103168.00 -$180523.20

Engineer V:$115960.00 - $202904.00

Typically selected candidates are hired at a salary rate between the minimum and midpoint of the range.

Benefits: This link below will provide you with Grant PUDs benefit that may be available if hired different employee types are eligible for different benefits.

Grant PUD Unified Insurance Program ()

Grant County PUD will be administering a background check as part of the hiring process if selected for this position.

Position Summary:

Be part of a Grid Optimization team responsible for designing developing implementing and maintaining electrical metering equipment within Grant County PUDs transmission and distribution systems as well as retail metering systems. This position is responsible for providing knowledge and expertise related to metering and power quality in distribution systems transmission systems and retail metering systems as well as other supporting facilities within Grant County PUDs Power Delivery Grid Optimization Department.

Essential Function:

Essential functions as defined under the Americans with Disabilities Act may include any of the following representative duties knowledge and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include but are not limited to the following:

General (applies to all levels)

• Active and regular collaboration with Power Delivery Engineering Meterman Meter Relay Technicians and Analysts to resolve issues found with metering systems or infrastructure.
• Collaborate with Meterman in the field with Customers experiencing an issue as needed. Acts as the point of communication with the customer in those situations.
• Demonstrated commitment to Grant PUDs mission vision values strategic plan and Grant PUD / IBEW Local 77 Code of Excellence. The incumbent should be familiar with these organizational priorities and behave in a way that aligns with these expectations.
• Understand and adhere to compliance requirements for this position that may include laws regulations security guidelines Grant PUD policies & Procedures.
• In this position if needed to operate a GPUD vehicle for business purposes please refer to the Vehicle/Asset Usage Policy IS-TA-POL-001.
• Actively participate in all aspects of our safety program including but not limited to:
  • Following all safety policies and procedures.
  • Alerting supervisors and coworkers to unsafe or hazardous working conditions.
  • Reporting any safety incidents or close calls within 24 hours to your supervisor.
  • Accepting feedback from supervisors and coworkers regarding your own safety performance.

Engineer I:

• Execution tasks for capital projects with direct oversite from supervisors and peers.
  • Low impact Metering system design.
  • Implementation of any communications device leveraging the AMI network.
• Basic understanding of metering equipment required for the safe and reliable operation of metering systems and infrastructure for Single Phase Self-Contained metering.
• Gain knowledge in skills related to best industry practice Utility Standards Codes or other Legal Standards that will be used to support Metering System projects and that are required for the safe and reliable operation of the equipment.
• Assist various groups and individuals with troubleshooting all District metering systems to ensure proper intended functionality.
• Learn Meter Programming applications/software i.e. MeterMate PC Pro Itron FDM etc.
• Gain knowledge of Meter testing and recording equipment i.e. WECO Warm-up boards Meter Farm Watt Net Revolution Bolt.
• Procures necessary meter testing equipment as necessary.

Engineer II:

• Support execution of capital projects with considerable guidance from supervisors and peers.
  • Low impact Metering system design.
  • Implementation of any communications device leveraging the AMI network.
• Research and support the implementation of new or existing materials and equipment.
• Basic understanding of metering equipment required for the safe and reliable operation of metering systems and infrastructure. That ranges from but is not limited to:
• Single Phase Self-Contained
• Three Phase Self-Contained
• Communications circuits and data telemetry
• Gain knowledge in skills related to best industry practice Utility Standards Codes or other Legal Standards that will be used to support Metering System projects and that are required for the safe and reliable operation of the equipment.
• Assist various groups and individuals with troubleshooting all District metering systems to ensure proper intended functionality.
• Collaborate with equipment manufacturers to resolve metering issues and/or system performance issues.
• Manage Meter Programming applications/software i.e. MeterMate PC Pro Itron FDM etc.
• Provide technical support for Meter testing and recording equipment i.e. WECO Warm-up boards Meter Farm Watt Net Revolution Bolt.
• Procures necessary meter testing equipment as necessary.

Engineer III:

• Support execution of capital projects with considerable guidance from supervisors and peers.
  • Retail Metering system design.
  • Substation Metering system design.
  • Implementation of any communications device leveraging the AMI network.
• Research and support the implementation of new or existing materials and equipment.
• Advanced understanding of metering equipment required for the safe and reliable operation of metering systems and infrastructure. That ranges from but is not limited to:
• Single Phase Self-Contained
• Three Phase Self-Contained
• Single Phase Instrument Rated
• Three Phase instrument Rated
• Communications circuits and data telemetry
• RF propagation and dispersion
• Data management
• Gain knowledge in skills related to best industry practice Utility Standards Codes or other Legal Standards that will be used to support Metering System projects and that are required for the safe and reliable operation of the equipment.
• Assist various groups and individuals with troubleshooting all District metering systems to ensure proper intended functionality.
• Collaborate with equipment manufacturers to resolve metering issues and/or system performance issues.
• Manage Meter Programming applications/software i.e. MeterMate PC Pro Itron FDM etc.
• Manage and create meter specific programs.
• Provide technical support for Meter testing and recording equipment i.e. WECO Warm-up boards Meter Farm Watt Net Revolution Bolt.
• Procures necessary meter testing equipment as necessary.
• Active and regular collaboration with Power Delivery Engineering Meterman Meter Relay Technicians and Analysts to resolve issues found with metering systems or infrastructure.
• Collaborate with Meterman in the field with Customers experiencing an issue as needed. Acts as the point of communication with the customer in those situations.
• Provide training and support for Meter Relay Technicians and Meterman as needed/requested.
• Collaborates with warehouse on appropriate MinMax levels based on the needs of the electric system related to all metering and the AMI system.
• Monitor failure rates of equipment related to all District metering systems and initiate adequate purchasing of replacement equipment to ensure system stability and performance.
• Leverages Advanced Metering Infrastructure data to locate potential system losses and works to correct those system losses when feasible.
• Active and regular collaboration with Customer Solutions concerning Advanced Metering Infrastructure data in analytical headend and Meter Data Management systems.
• Performs analysis of power quality recording device data installed in the field for troubleshooting customer or systems issues.

Engineer IV:

• Lead execution of capital projects with little guidance from supervisors and peers.
  • Retail Metering system design.
  • Substation Metering system design.
  • Interchange Metering system design with support from supervisors and peers.
  • Implementation of any communications device leveraging the AMI network.
• Manage the Districts Advanced Metering Infrastructure SEL and station indicating metering systems and legacy MV90 system.
• As needed reviews the work of Grid Optimization Analysts and makes recommendations for system inspections investigations and corrections related to Metering or the Electrical Distribution System working closely with the Systems Engineer.
• Research and support the implementation of new or existing materials and equipment.
• Expert understanding of metering equipment required for the safe and reliable operation of metering systems and infrastructure. That ranges from but is not limited to:
• Single Phase Self-Contained
• Three Phase Self-Contained
• Single Phase Instrument Rated
• Three Phase instrument Rated
• Communications circuits and data telemetry
• RF propagation and dispersion
• Data management
• Knowledge and skills related to best industry practice Utility Standards Codes or other Legal Standards that will be used to support Metering System projects and that are required for the safe and reliable operation of the equipment.
• Lead various groups and individuals with troubleshooting all District metering systems to ensure proper intended functionality.
• Collaborate with equipment manufacturers to resolve metering issues and/or system performance issues.
• Manage Meter Programming applications/software i.e. MeterMate PC Pro Itron FDM etc.
• Manage and create meter specific programs.
• Provide technical support for Meter testing and recording equipment i.e. WECO Warm-up boards Meter Farm Watt Net Revolution Bolt.
• Procures necessary meter testing equipment as necessary.
• Collaborate with Meterman in the field with Customers experiencing an issue as needed. Acts as the point of communication with the customer in those situations.
• Provide training and support for Meter Relay Technicians and Meterman as needed/requested.
• Collaborates with warehouse on appropriate MinMax levels based on the needs of the electric system related to all metering and the AMI system.
• Monitor failure rates of equipment related to all District metering systems and initiate adequate purchasing of replacement equipment to ensure system stability and performance.
• Leverages Advanced Metering Infrastructure data to locate potential system losses and works to correct those system losses when feasible.
• Active and regular collaboration with Customer Solutions concerning Advanced Metering Infrastructure data in analytical headend and Meter Data Management systems.
• Performs analysis of power quality recording device data installed in the field for troubleshooting customer or systems issues.
• Performs other duties as assigned.
• Demonstrate commitment to Grant PUDs mission vision values and strategic plan. The employee should be familiar with these organizational priorities and behave in a way that aligns with these expectations. Understand and adhere to compliance requirements for this position that may include laws regulations security guidelines Grant PUD policies and procedures.
• Actively participate in all aspects of our safety program including but not limited to:
• Following all safety policies and procedures.
• Alerting supervisors and coworkers to unsafe or hazardous working conditions.
• Reporting any safety incidents or close calls within 24 hours to your supervisor.
• Accepting feedback from supervisors and coworkers regarding your own safety performance.

Engineer V:

• Lead capital execution of projects and mentor others as it relates to Metering system design materials equipment. Direct the development of processes focusing on operations and engineering practices that drive strong reliability and performance related to metering systems.
• Lead and mentor the Grid Optimization team towards establishment of technical qualifications and policies. Develop and teach the specifications of the equipment.
• Coordinate with different stakeholders and provide direct input to metering project plans. Collaborate with responsible groups and facilitate smooth transition of the design to implementation.
• Develop design requirements relating to the application of metering equipment in substations and for our retail metering systems. Interpretation and communication of company policies and procedures to internal stakeholders and external project support partners.
• Develop technical specification and standards for ordering metering equipment and parts and utilize new technology and best practices during design.
• Provide technical expertise and/or team leadership as needed. Develop trainings for engineers/partner groups and assist less experienced colleagues in planning conceptual/detail engineering and the field.
• Engage with manufacturers and suppliers (plant/factory visits project site visits) and represent Grid Optimization department on new equipment and vendor evaluations.
• Engage in industry forums and events. Support the Grid Optimization team at commission meetings and community open houses.
• Facilitate Metering equipment specification and drawings review coordinate with manufacturers and vendors to make sure they adhere to the company requirements.
• Review existing materials components and design standards for process improvements cost savings etc. Perform independent and/or collaborative research to find innovative and cost-effective engineering solution to operational problems.
• Serve as a management consultant on complex systematic engineering problems and issues. Control technical financial and service commitments to internal and external customers.
• Strong Project Management Support that includes budget forecasts scheduling coordination construction/commissioning for medium/large-sized projects.
• This position will be an expert in utilizing skills related to best industry practice Utility Standards Codes or other Legal Standards that are required for the safe and reliable operation of the metering systems.

Engineer I

Required Qualifications:

• Bachelors degree in electrical engineering or engineering technology field OR 4 additional years of relevant experience in lieu of degree.

Preferred Qualifications:

• Bachelors degree in electrical engineering
• Experience with Meter Programming and Meter Data analysis.
• Experience with Customer Power Quality issues and Power Quality recording instruments.

Engineer II

Required Qualifications:

• Bachelors degree in electrical engineering or engineering technology field OR 4 additional years of relevant experience in lieu of degree.
• 1 years of work experience in electric distribution at a Utility

Preferred Qualifications:

• Bachelors degree in electrical engineering
• Experience with Meter Programming and Meter Data analysis.
• Experience with Customer Power Quality issues and Power Quality recording instruments.
• 1 years of work experience in electric distribution at a Utility

Engineer III

Required Qualifications:

• Bachelors degree in electrical engineering or engineering technology field OR 4 additional years of relevant experience in lieu of degree.
• 3-5 years of work experience in electric distribution at a Utility
• Experience with Meter Programming and Meter Data analysis.
• Experience with Customer Power Quality issues and Power Quality recording instruments.

Preferred Qualifications:

• Bachelors degree in electrical engineering
• Masters degree.
• Experience with RF Propagation .
• Experience using a Spectrum Analyzer.
• 3 years relevant work experience as a Metering Engineer.

Engineer IV

Required Qualifications:

• Bachelors degree in electrical engineering or engineering technology field OR 4 additional years of relevant experience in lieu of degree.
• 6 years of relevant work experience (Metering Engineer) or demonstrated equivalent.
• Experience with Customer Power Quality issues and Power Quality recording instruments.
• Experience managing the analysis of Meter Data.

Preferred Qualifications:

• Masters degree
• Experience creating Meter Program specifications.
• Experience with RF Propagation.
• Field experience using a Spectrum Analyzer.
• Experience with Meter Data Management systems.
• A Washington State Engineering in Training
• Professional Engineer (PE).

Engineer V

Required Qualifications:

• Bachelors degree in electrical engineering or engineering technology field OR 4 additional years of relevant experience in lieu of degree.
• 10 years of relevant work experience (Metering Engineer) or demonstrated equivalent which includes experience in creating meter program specifications meter data management systems and RF propagation.
• Experience with Customer Power Quality issues and Power Quality recording instruments.
• Experience managing the analysis of Meter Data.
• Experience with Meter Data Management systems.

Preferred Qualifications:

• Masters
• Field experience using a Spectrum Analyzer.
• Professional Engineer (PE).

Other Knowledge Skills and Abilities

• Knowledge of NERC standards and regulatory compliances.
• Knowledge of concepts principles theories and methods surrounding electrical engineering industry standards and best practices (NEC IEEE NFPA ANSI).
• Ability to perform work in the field and work in construction environments.
• Skill in problem-solving and thinking critically.
• Written and oral interpersonal communication; workflow and time management.
• Knowledge of meter forms and applications.

Physical Requirements

• Position may be eligible for partial hybrid work arrangement: âYes âNo
• Majority of work is performed in a standard office
• Some field work that may require operation of a district
• Typical shifts of employees in this position: â8 hours â9 hours â10 hours â12 hours

*applicant/incumbent should refer to the Physical Capacity Evaluation (PCE).

The statements contained herein reflect general details as necessary to describe the principal functions for this job the level of knowledge and skill typically required and the scope of responsibility but should not be considered an all-inclusive listing of work requirements. Individuals may perform other duties as assigned including work in other functional areas.