Aerospace Plating Operator Level 3 Swing Shift

Located in Kent Washington Protective Coatings Inc. is a leading provider of full service finishing for the aerospace electronics and medical industries in both commercial and defense applications. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting passivation cadmium and nickel zinc plating chromic sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Organic coating includes the application and testing of multiple resin systems such as epoxies phenolics polyurethanes polyesters elastomerics intumescents lacquers alkyds acrylics dry-film lubricants and Teflon. Current approvals include the National Aerospace and Defense Contractors Accreditation Program (NADCAP) Boeing Commercial Aircraft Company Boeing Defense and Space Boeing/Philadelphia Boeing Long Beach Grumman Gulfstream Lockheed Martin Goodrich Bombardier Cessna and Sikorsky among much else.

Founded in 1976 Protective Coatings Inc. was later acquired by Precision Castparts in 2012 and became part of the Aerostructures Division.

Position Summary:
Selected candidates for a Plating Operator Level 3 position will be expected to successfully apply Plating and Passivate applications to variety of simple to complex steel detail part configurations. Candidates must be familiarized in Cadmium Copper and Zinc/Nickel plating applications the application of Post Chromate Conversion Coatings in both manual and tank processing and methods of ferrous cleaning and Passivation applications. Level 3 Plating Operators shall be competent in all racking techniques and pre-cleaning operations such as vapor degreasing and solvent cleaning. Operators will be expected to perform mathematic calculations to determine part surface area for the aid of plating applications and will be required to use measuring tools such as micrometers and Permascopes to determine pre and post dimensions of part features. Candidates must be self-disciplined and self-motivated individuals with strong accountability (attention to details) skills. Candidates must have the ability and desire to be flexible and adaptable in a fast-paced production environment be resourceful and innovative along with presenting a strong business ethic and compliance to leadership and company policies and a good communicator with the ability to represent the company in a positive manner. A Level 3 Plating Operator candidate will be expected to perform a variety of tasks which include but are not limited to: cleaning of plating equipment and tooling racking and unracking of parts for processing inspections of finished product and provide guidance to other lower level plating operators.

Primary Duties & Responsibilities:

• Reviewing and assimilating work instructions relating to racking unracking cleaning passivate and plating operations.
• Perform receiving inspections (before processing) as needed and immediately report any damage or discrepancy.
• Perform Cadmium plate Copper plate and Zinc/Nickel plate process applications in accordance with specification requirements.
• Perform manual (localize touch up) and tank process applications of Post Chromate (chromate conversion coating) in accordance with specification requirements.
• Gathers supplies such as racks tooling baskets carts (etc).
• Racking of production parts for cleaning plating and passivate operations.
• Cleaning of production parts which include vapor degrease solvent cleaning and ferrous (acid) cleaning.
• Maintenance of racks and racking implements (stripping and repair).
• Pre and Post measuring and calculations of part surfaces and features for the purposes of control of dimensioned tolerances during plating applications.
• Will require use of personal protective equipment (PPE) during certain tasks (goggles safety glasses aprons boots gloves hearing protection etc) and be expected to comply with safety directives and policy.
• Will be exposed to chemicals/solvents and occasional fumes wet/humid conditions and moderate noise level.
• Will at times require heavy lifting or use of mechanical hoist for the aid in lifting objects.
• Work closely with area leadership to complete work and prioritize tasks.
• Clean organize and maintain work area as prescribed by supervision.
• Complete documentation counting of production parts computer scanning package to protect and transport and other assigned tasks.
• Studies production schedules and estimates worker hour requirements for completion of job assignment.
• Establishes or adjusts work procedures to meet production schedules.
• Requisitions plating materials and tooling required to meet production goals.
• Must be able to mentor and train other employees.

Required Skills:

• Basic mathematic skills: add subtract multiply and divide using whole numbers common fractions and decimals.
• Ability to stand for prolonged periods with limited movement.
• Good communication skills.
• Ability to work alone or as a member of a team good cooperative skills.
• Ability to successfully apply Cadmium plate Copper plate and Zinc/Nickel plate to a wide variety of production aerospace parts in accordance with Boeing Military and other specifications.
• Ability to successfully perform Passivation process.
• Demonstrate various techniques in racking and plating applications to achieve complete coverage (i.e. use of anodes barrel plating applied method for high current density areas).

• Must have strong leadership skills ability to speak in front of a group provide direction and guidance to lower level employees and contributes to building a positive team spirit.

• Ability to read write and communicate in English. Specifically applicants must be able to read and understand written procedures and instructions.
• Ability to lift and carry up to 35 lbs.
• Demonstrated ability to work effectively in a fast paced and ever-changing environment with multiple priorities.
• Demonstrated ability to effectively facilitate the implementation of significant changes in large organization.

• Must be able to perform basic in process inspection duties as required.

• Ability to provide good quality workmanship and have a strong attention to detail.

Required Experience:

• (3) years minimum experience in the application of Cadmium Copper and Zinc/Nickel plating ferrous cleaning and Passivation processing and the support functions associated with the Plating department.

Level of Education:

• General Standard education including the ability to read and write in English.

Shift:

• Monday through Friday from 2pm to 10:30pm