Technician I III-Op&Main (Naples)

Responsible for operating and monitoring plant equipment outside of the control room. Records operational data and reports any abnormalities. May perform minor maintenance tasks such as adjustments add/change lubricants preventative and predictive maintenance. Typically reports to the Control Room Operator. Operates remote units independently from CRO at times and will operate base plant under directions of the Control Room Operator.

• Operates steam combustion and hydroelectric turbines aligns drains and makes all necessary adjustments while working in operations. Performs minor and major mechanical maintenance on all plant equipment while working in maintenance. Performs maintenance calibration and repair on plant control electrical and communications systems hardware and software while working as an instrumentation technician.
• Inspects all plant equipment inside and outside checks and lubricates equipment in accordance with the prescribed procedure periodically records readings on log sheets as directed and reports all non-routine items found.
• Utilizes AECCs Enterprise Asset Management System to identify the need for maintenance and track all activities and statistics required to support maintenance and operations functions.
• Travels to remotely located hydroelectric turbine and combustion turbine plants and performs work as directed.
• Participates in the training program and continually seeks to improve skills required.
• Cleans assigned area as directed.
• Maintains familiarity with observes and practices all safety precautions. Maintains familiarity with and abides by all applicable internal AECC policies and procedures regarding NERC and FERC compliance.
• Performs duties in such a manner that applicable laws regulations and permit requirements including environmental permit requirements are adhered to.
• Performs water tests as directed and operates water treatment equipment such as demineralizers reverse osmosis units and filtration systems.
• Carries out security duties as necessary and as directed including screening/identifying visitors and performing security patrols to enforce security policies.
• Assists with equipment lockout/Tagout for maintenance by positioning energy isolation devices as directed.
• Performs preventive maintenance on all plant equipment in accordance with schedules to ensure reliable equipment operation.
• Directs other technicians in accordance with Maintenance Supervisors instructions while working in maintenance.
• Performs maintenance tasks in the area of specialized skills (welding machinist) while working in maintenance if applicable.
• Maintains plant continuous emissions monitoring systems as required for compliance with State and Federal regulations while working as an instrument technician.
• Maintains and utilizes historical plant performance database interprets control system software and performs data analysis as needed to support plant systems troubleshooting maintenance troubleshooting or engineering evaluation while working as an instrument technician.
• Assists in the firing of the boiler and all duties related to burning fuel oil including unloading and transferring oil cleaning strainers and spill cleanup.
• Performs any and all other tasks assigned by the line of supervision that the employee is physically able to perform with or without reasonable accommodation.
• Due to our obligation to provide continuous reliable electric service to our customers the ability to maintain regular and punctual attendance and the ability to work outside your regularly scheduled office hours when necessary is an essential function of the job.

• The ability to handle stress and work well with others are essential functions of this position.
• Perform any other related duties as required or assigned.
• Maintain awareness of and compliance with applicable laws and regulations from various regulatory entities internal policies procedures and directives. Ensure ongoing monitoring and timely incorporation of any changes to maintain adherence to compliance standards.

• Tech I - High school or GED with particular emphasis during high school in office skills shop skills or others plus 2 years related experience and/or training or equivalent combination of education and experience.
• Tech II - High school or GED plus night trade extension or correspondence school specialized training equal to two years of college plus 4 years related experience and/or training or equivalent combination of education and experience.
• Tech III - High school or GED plus night trade extension or correspondence school specialized training equal to two years of college plus 5 years related experience and/or training or equivalent combination of education and experience.

• Valid drivers license.
• Welding certification is required for qualification as a welder.

• Industrial electricians license preferred for qualification as instrument technician.

The following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the functions of this job the employee is regularly exposed to work near moving mechanical parts extreme heat risk of electrical shock; frequently exposed to work in high precarious places wet or humid conditions vibration; and occasionally exposed to fumes or airborne particles toxic or caustic chemicals outdoor weather conditions. The noise level in the work environment is usually loud.

The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations.

Moderate diversity moderately physical. Work activities which allow for a moderate amount of diversity in the performance of tasks which requires somewhat diversified physical demands of the employee.

While performing the functions of this job the employee is continuously required to talk or hear; regularly required to stand walk use hands to finger handle or feel reach with hands and arms climb or balance stoop kneel crouch or crawl; and occasionally required to sit taste or smell. The employee must occasionally lift and/or move more than 100 pounds; frequently lift and/or move up to 50 pounds; regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision; distance vision; color vision; peripheral vision; depth perception; and ability to adjust focus

• This position is designated as safetysensitive based on the duties performed. Employees in safetysensitive positions must comply with the Cooperatives fitnessforduty requirementand all applicable federal and state regulations governing workplace substance use and safety.
• Shift work required while working in operations.
• Must be qualified by AECC as either (1) maintenance technician and junior operator or (2) special skills machinist special skills welder instrument technician lead hydro plant operator or lead CT plant operator.