Semiconductor Equipment Support Technologist Senior Semiconductor Equipment Support Technologist

We have an opening for a Semiconductor Equipment Support Technologist or Senior Semiconductor Equipment Support Technologist for the Equipment and Technical Support Team within the Center for Micro and Nano Technology (CMNT). You will provide hands-on maintenance troubleshooting repair installation and reliability improvement of semiconductor manufacturing and metrology equipment in support of research and development activities in a multi-user cleanroom environment. You will diagnose and restore equipment inside the cleanroom and this role is well suited for a technologist who enjoys understanding how complex tools work takes pride in tool performance and uptime and can balance troubleshooting with timely escalation to support original equipment manufacturers or vendors. The team supports approximately 200 nanofabrication and metrology tools and this position is in the Materials Engineering Division (MED) within the Engineering Directorate.

This position requires full-time on-site presence due to the nature of the work. 

This position will be filled at either level depending on your qualifications. Additional job responsibilities (outlined below) will be assigned if you are selected at the higher level.

You will

• Provide general hands-on electro-mechanical support for the setup maintenance troubleshooting repair installation removal and decommissioning of semiconductor manufacturing and metrology equipment including photolithography thin film deposition plasma etching wet processing metrology and related support systems.
• Diagnose failures and performance issues involving vacuum hardware pumps valves gas delivery pneumatics fluid systems RF and power-delivery subsystems motion systems robotic or stage mechanisms sensors interlocks electrical assemblies board-level electronics PLCs HMIs software interfaces and industrial or networked communications including CAN Modbus and Ethernet.
• Interpret mechanical drawings electrical schematics wiring diagrams manuals alarm histories service notes PLC I/O and data logs to determine root cause and corrective action.
• Perform preventive and corrective maintenance chamber cleaning and rebuilds calibrations recommissioning upgrades installations and equipment recovery activities.
• Work safely in a Class 100 cleanroom and related support spaces while following requirements for hazardous chemicals compressed and toxic gases vacuum high voltage RF power laser and other hazards as applicable.
• Write clear maintenance notes concise user-facing status updates vendor correspondence and SOPs or maintenance procedures that help the team troubleshoot consistently and communicate effectively.
• Track organize and recommend spare parts and critical components to reduce downtime improve repair readiness and support long-term tool reliability.
• Work effectively in a multidisciplinary environment with users technicians engineers EH&S partners service providers and vendors; balance changing priorities; proactively identify work that needs attention; and own assigned problems to closure.
• Support broader facility technical operations and perform other duties as assigned.
• Perform other duties as assigned.

Additional job responsibilities at the 533.3 Level

• Independently lead root-cause diagnosis and repair of complex tool problems that span multiple subsystems ambiguous failure modes or repeated recurrences.
• Plan and lead equipment installations upgrades rebuilds and reliability improvements; develop or refine maintenance recovery and troubleshooting procedures.
• Provide technical leadership by mentoring others sharing troubleshooting methodology and helping establish best practices for documentation repair quality and equipment care.
• Identify when escalation to OEMs or vendors will materially reduce downtime and coordinate those engagements effectively.

Qualifications :

• Ability to obtain and maintain a U.S. DOE Q-level security clearance which requires U.S. Citizenship.
• Associate degree in engineering mechatronics electronics instrumentation vacuum or mechanical technology or the equivalent combination of education and related experience.
• Intermediate and fundamental mechanical troubleshooting skills and understanding of electrical troubleshooting for complex electro-mechanical equipment.
• Experience troubleshooting and repairing moderately complex equipment in semiconductor manufacturing metrology vacuum systems industrial automation scientific instrumentation or a closely related technical environment.
• Ability to interpret mechanical drawings electrical schematics wiring diagrams manuals and service documentation.
• Experience using standard diagnostic tools and safely working around electrical mechanical and vacuum systems.
• Experience making independent decisions toward resolution of technical problems while recognizing when to consult teammates or engage OEM support.
• Effective written verbal and presentation communication skills including the ability to communicate clearly with technical users researchers vendors and teammates and to produce concise written documentation.
• Ability to work in a fast-paced multidisciplinary environment with many simultaneous tasks and occasional priority pivots.
• Intermediate knowledge of standard office computer software and maintenance documentation practices necessary to produce clear updates procedures and records.

Additional Qualifications at the 533.3 Level

• Advanced ability to independently troubleshoot complex mechanical electrical vacuum controls software and networking problems and implement durable solutions.
• Significant hands-on experience with semiconductor manufacturing or metrology equipment or similarly complex high-vacuum and automated systems.
• Experience with board-level electrical troubleshooting signal tracing electrical I/O diagnosis PLCs HMIs motion control and industrial communications.
• Ability to create or revise complex procedures engineering notes SOPs sketches drawings and maintenance documentation.
• Demonstrated ability to lead repairs coordinate vendors or OEMs effectively and mentor less-experienced staff.
• Experience planning leading and executing complex long-term technical tasks involving the coordination of personnel resources and procurements such as the installation of a new instrument.

Qualifications We Desire

• Experience with semiconductor manufacturing and metrology equipment. 
• Experience working in cleanroom operations or a shared-user facility. 
• Experience with high-vacuum systems pumps chambers gas handling chillers RF power delivery and materials compatibility or cleanliness-sensitive assemblies.
• Experience with CAN Modbus Ethernet or other industrial or network communications used in complex equipment.
• Experience with board-level troubleshooting oscilloscope use soldering or rework or similar electrical diagnostics.
• Experience with motion systems robotics aligners or stages and other precision mechatronic subsystems.
• Experience with toxic gas systems and other hazardous process support infrastructure.
• Experience with spare-parts strategy preventative maintenance programs and equipment reliability improvement.
• Demonstrated initiative strong ownership meticulous troubleshooting and consistent follow-through.
• Experience with microfabrication and a record of sustained hands-on technical learning through prior roles projects or other relevant experience.

Pay Range

$43.55 - $63.97 Hourly

$43.55 - $53.36 Hourly for the 533.2 level

$52.23 - $63.97 Hourly for the 533.3 level

This is the lowest to highest salary we in good faith believe we would pay for this role at the time of this posting.  An employees position within the salary range will be based on several factors including but not limited to specific competencies relevant education qualifications certifications experience skills seniority geographic location performance and business or organizational needs.

Additional Information :

#LI-Onsite

Position Information

This is a Career Indefinite position open to Lab employees and external candidates.

Why Lawrence Livermore National Laboratory

• Included in 2026 Best Places to Work by Glassdoor!
• Flexible Benefits Package
• 401(k)
• Relocation Assistance
• Education Reimbursement Program
• Flexible schedules (*depending on project needs)
• Our values - visit  Clearance

  This position requires a Department of Energy (DOE) Q-level clearance.  If you are selected we will initiate a Federal background investigation to determine if you meet eligibility requirements for access to classified information or matter. Also all L or Q cleared employees are subject to random drug testing.  Q-level clearance requires U.S. citizenship. 

  Pre-Employment Drug Test

  External applicant(s) selected for this position must pass a post-offer pre-employment drug test. This includes testing for use of marijuana as Federal Law applies to us as a Federal Contractor.

  Wireless and Medical Devices

  Per the Department of Energy (DOE) Lawrence Livermore National Laboratory must meet certain restrictions with the use and/or possession of mobile devices in Limited Areas. Depending on your job duties you may be required to work in a Limited Area where you are not permitted to have a personal and/or laboratory mobile device in your possession.  This includes but not limited to cell phones tablets fitness devices wireless headphones and other Bluetooth/wireless enabled devices.  

  If you use a medical device which pairs with a mobile device you must still follow the rules concerning the mobile device in individual sections within Limited Areas.  Sensitive Compartmented Information Facilities require separate approval. Hearing aids without wireless capabilities or wireless that has been disabled are allowed in Limited Areas Secure Space and Transit/Buffer Space within buildings.

  How to identify fake job advertisements

  Please be aware of recruitment scams where people or entities are misusing the name of Lawrence Livermore National Laboratory (LLNL) to post fake job advertisements. LLNL never extends an offer without a personal interview and will never charge a fee for joining our company. All current job openings are displayed on the Career Page under Find Your Job of our website. If you have encountered a job posting or have been approached with a job offer that you suspect may be fraudulent we strongly recommend you do not respond.

  To learn more about recruitment scams:  Employment Opportunity

  We are an equal opportunity employer that is committed to providing all with a work environment free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race color religion marital status national origin ancestry sex sexual orientation gender identity disability medical condition pregnancy protected veteran status age citizenship or any other characteristic protected by applicable laws.

  Reasonable Accommodation

  Our goal is to create an accessible and inclusive experience for all candidates applying and interviewing at the Laboratory.  If you need a reasonable accommodation during the application or the recruiting process please use our online form to submit a request. 

  California Privacy Notice

  The California Consumer Privacy Act (CCPA) grants privacy rights to all California residents. The law also entitles job applicants employees and non-employee workers to be notified of what personal information LLNL collects and for what purpose. The Employee Privacy Notice can be accessed here.

  
  

  Remote Work :

  No

  
  

  Employment Type :

  Full-time