Finishing Operator| 5th Shift

Position Objectives: Assemble sample boards label Hard Surface samples and pack samples for shipping ensuring samples are free from defects. Position will require working at different stages of assembly according to production needs.

Swatch Assembler:

Set up totes in correct order checking with the go-by board to ensure order and colors are correct. Place the swatches in position as the empty binder/board is conveyed through the workstation. Inspect work. Look for correct swatch alignment and color in board and check for excessive glue under/oversized swatch cutting obvious material defects etc. Inspect boards during processing and upon completion for defects. Rework swatches/boards as needed. Retrieve tops and topping supplies for sample boards as needed. Adjust back glue head as needed. Install tops using glue or posts as called for by work order.

8.Ensure materials are correct for order to be ran.

9.Set up glue heads and ensure glue is shooting on boards correctly.

10.Clean off lint and debris from the swatched binder/board using a vacuum.

11.Check gluepot and fill as needed.

12.Determine box size package into box secure with tape or strapping and stackonto pallet.

Hard Surface Labeling:

Stage work area with all required materials ie. labels swatches work order etc. Inspect all labeling production and samples for quality defects. Place the appropriate label on the back of the sample. Place appropriate face sticker(s) on front of board if required. Place appropriate product ID sticker on Mezz chips. Fill glue reservoir tray on Gluefast machine with cold glue. Refill throughout day as necessary. Inspect work watching for obvious material defects to ensure that the finished sample will be of the highest quality. Neatly restack all labeled work onto buggies or pallets. Thoroughly clean Gluefast machine at end of shift. Must use ink stamp to apply w/o number on all finished boards. Put plastic handles on wood panels where oval shaped hole has been routed out.Plastic handles snap together.

Must have basic knowledge of computer operation:

Hard Surfaces Packing

Obtain boards that are to be packed from designated area. Each buggy / pallet retrieved should be identified by a traveler and pulled up by promise date unless otherwise directed by lead or manager. If theres no buggy in staging area consult Lead. Verify that the traveler and label on board are same. All boards planks etc. must have w/o number on it. Make sure the amount of boards / panels match with the amount printed on the traveler. Assemble all boards / panels for an order together. Package as needed. Attach shipping labels on the box(es). Packer must always be aware of the condition of the boards and check for defects and incorrect labels. Packer will printer and apply correct box stickers. Packer is responsible to move full pallets to staging / pick up area beyond assembly tables. Put plastic handles on wood panels where oval shaped hole has been routed out. Plastic handles snap together.

15. Must have basic knowledge of computer operation

16. Responsible for pulling and stocking mezz panels as necessary.

17. Responsible for running the edge staining machine.

ALL:

Must meet production standards. Key in production in computer throughout the day. Set-up materials for subsequent jobs. Rework samples or boards as needed. Must adhere to the normal work schedule i.e. starting and stopping times. Attend job on a regular basis and comply with the Corporate Absenteeism and Tardiness Policy. Must be flexible and work at different stages of assembly as requested by Supervisor or Lead.

Clean work area at end of shift and periodically during shift. Any duties found necessary to aid in a safe and efficient operation. Will be required to participate in stretching exercises as directed by the supervisor or lead.

Physical Requirements:

Standing during entire shift. Walking as needed to move material for rework or set-up in between orders. Squatting as needed to move materials. Lifting totes of swatches for set-up weighing an average 10 lbs. Lifting up to 50 lbs. of Hard Surfaces boxes Continual use of arms and hands lifting samples boards placing swatches. Pushing buggy or pallet jack. Must be able to exert a maximum of 17 lbs. of downward force to push pallet jack handle down and approximately 50 lbs. of pushing force when moving loaded buggies. Must be able to work in a manufacturing environment.

Shaw Employee Benefits:

Health Dental and Vision Insurance

Health Savings Account

Shaw Family Health and Dental Centers (Dalton & Cartersville)

Behavioral and Mental Health Support

Paid Time Off

Bereavement and Holiday Pay

Paid Parental Leave and Leave of Absence Pay

Employee Discounts

Wellness Incentive Program

Career Development & Education Assistance

401K Retirement Savings Plan

Disability & Life Insurance

Financial and Retirement Planning

Medical & Social Security Assistance

And More!

Monday-Thursday 10 Hours 2:45pm-12:45am