Control Valve Repair Technician Lead

Essential Duties

• Perform disassembly and assembly of control valves including:
  • Read interpret and respond accordingly to sales order and customer data sheet information
  • Identify various valves and accessories
  • Perform visual inspections during disassembly and reassembly to ensure all components of the assembly are correct and in good condition to perform as designed
  • Identify and initiate any changes that may need to occur within the sales order system to match the customer data sheet.
  • Take digital pictures and electronically transfer into the ERP system network folder to accurately track all assemblies.
• Safely disassemble valves and parts including various types of valves such as:
  • Sliding stem valves
  • Rotary ball valves
  • Rotary butterfly valves
  • High performance rotary butterfly valves
  • Various bolted bonnet gate globe and check valves
  • Soft-seated ball valves
  • Various pressure globe and rotary valves
• Safely disassemble actuators and parts including various types of actuators such as:
  • Double acting pneumatic sliding stem piston actuators
  • Double acting pneumatic rotary piston actuators
  • Single acting sliding stem spring and diaphragm actuators
  • Single acting rotary spring and diaphragm actuators
• Evaluate parts and maintain material awareness including:
• Mark parts correctly and maintain organization and segregation
• Perform chemical solvent cleaning when needed
  • Perform inspection of parts being used in assembly and ensure critical dimension requirements are being met where required

• Identify and utilize manufacturers nomenclature (i.e. literature including IOM inspection criteria part numbers and model numbers)
• Identify materials using approved PMI method alloy analyzer material markings material standards etc. including report completion
• Complete all quality control sheets including date sign-off status etc.
• Understand all special requirements needed for the assembly while maintaining compliance with all factories and or customer requirements.

• Safely and accurately perform some machining processes:
  • Use drill press or pneumatic tools for drilling and pinning stems for valve plugs
  • Use hand grinder for polishing some flange and sealing surfaces
• Safely assemble control valves from repair order instructions customer test-report/specification sheets and OEM IOM manuals; this includes performing all calibration of all positioners and or controllers.
• Valve types include:
  • Sliding stem plug valves
  • Rotary ball valves
  • Rotary butterfly valves
  • Soft-seated ball valves
• Install stem packing
• Safely and accurately attaches actuators to valves
• Sets correct valve travel
• Sets correct bench set on actuator
• Can accurately and efficiently tube up positioners and controllers to the actuator along with any other accessories on the assembly

• Safely test control valves according to applicable Code test requirements while applying and utilizing manufacturers manuals using compressed air water and nitrogen. Accurate and thorough completion of test reports with all required detail is essential.
• Ability to safely and accurately tube up calibrate and troubleshoot various pneumatic and digital positioners and controllers as per factory and or customer spec sheets including but not limited to the following:
• Fisher 3582 and 3582I sliding stem positioners
• Fisher 3610J 3610JPJP rotary positioners
• Fisher 3570 positioner
• DVC6200 positioner
• DVC2000 positioner
• Fisher C1P pressure controller
• Fisher 4195 pressure controller
• Fisher 4660 pressure controller
• Fisher 377 trip valves
• Fisher 2500 pneumatic level controller
• Fisher DLC digital level controllers
• Performs all calibration procedures for full Valvelink signatures required for all digital positioners on all AD and PD tier positioners.
• Ability to generate all reports and graphs associated with valve signatures for digital valve controllers.
• Ability to read and analyze all reports and graphs related to test performed using Valvelink software.

• Ability to troubleshoot and remedy any problems or errors encountered during the valve scan process.
• Perform complete final inspection once valve assembly has been completed including
• Testing and reports related to the assembly.
• Knowledge of software and operation of both 475 and TREX handheld communicators.
• Perform disassembly and assembly of new regulators and relief valves including:
• Direct operated regulators
• Pilot operated regulators
• Read interpret and respond accordingly to sales order and customer data sheet information and or any special customer requirements
• Understand and be able to explain purpose and functions of regulators and relief valves.
• Safely and accurately perform spring orifice and body changes to various types of regulators and relief valves.
• Safely and accurately test all regulators and relief valves
• Safely and accurately set regulators and relief valves to desired set point
• Complete all quality control sheets including date sign-off status etc.
• Safely perform final inspection process documenting any findings
• Understands and ensures that the JHC TCC (Total Customer Commitment) standards are upheld at all times
• Actively and enthusiastically supports JHC colleagues at all times
• Builds and cultivates solid relationships internally and externally
• Travels when required and applicable
• Regular and predictable attendance is essential for this position.

The above list of duties and responsibilities does not constitute the entire list and the list can be changed when necessary at the discretion of management when business needs customer demands and other industry or job- related circumstances arise.

Education and/or Work Experience

• High School or Equivalent
• A minimum of 7 years in the valve repair industry preferred
• TWIC OSHA Safety Security Passport
• Valid State-issued drivers license
• Knowledge of Machinery fundamentals including Control Valves Pneumatic Safety Systems and Rotary Valves.
• Ability to read and understand customer data spec sheets for final assembly of control valves and regulators.
• Knowledge of industrial and residential regulators
• Knowledge of Oil and Gas and processing plant equipment and processes.
• Knowledge of various digital positioners and controllers typically used on control valves including but not limited to Emerson Fisher Products typically used in the oil and gas industry
• Ability to use basic hand and pneumatic tools confidently and safely.
• Working as self-directed field/shop environment worker.

• Experience with bending and running tubing is preferred.
• Read and record measurements using standard measuring tools such as manual torque wrenches dial calipers Vernier calipers micrometers thread gauges tape measure and scale.
• Accurately perform final inspections for work completed by level I and level II techs.
• Ability and willingness to assist level I and II techs through the assembly build process
• Ability to read and record measurements using standard measuring tools such as manual torque wrenches dial calipers Vernier calipers micrometers thread gauges tape measure and scale

Supervisory Responsibilities

âNo

âYes please list direct reports titles

Travel

• As needed throughout Gulf Coast region

Competencies

• Demonstrate good Ethics Values and Integrity
• Professional in appearance and actions
• Customer Service
• Strong Mechanical Aptitude
• Demonstrated ability to read write and verbalize in a professional organized manner
• Moderate computer skills
• Self-Starter and Self-Directed
• Demonstrate problem solving abilities

This position has three levels within the job. Progression through each level depends on specific knowledge skills andabilities. Evaluations are conducted and employees are assessedon growth and major competencies. Level requirements can be found on the companys intranet.

Physical Requirements

N (Not Applicable) Activity is not applicable to this occupation

O (Occasionally) Occupation requires this activity up to 33% of the time (0 2.5 hrs. / day)

F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 5.5 hrs. / day)

C (Constantly) Occupation requires this activity more than 66% of the time (5.5 hrs. / day)

Required Experience:

IC