JOB TITLE: Apprentice
REPORTS TO: Job Site Foreman assigned to specific job site
SCOPE OF WORK:
Work responsibilities consist of installation of alterations to addition and/or repair of electrical systems including use of associated tools materials and equipment within the commercial and industrial electrical industries.
RESPONSIBILITIES:
- Demonstrate safe work habits and proper care of tools and equipment.
- Understand language nomenclature and terms associated with construction documents.
- Demonstrate skills in the proper selection of and use of tools on the job.
- Produce a quantity of work equal to the job requirements of the companys standards.
- Produce a quality work that meets or exceeds the National Electrical Code requirements and the companys standards.
- Maintain a positive attitude toward completing a given job and complying with all companys policies.
EMPLOYEE TRAITS:
- Punctuality
- Dependability
- Positive Attitude
- Takes Initiative
- Expresses Interest in Work
- Cooperative
- Adaptable/Teachable
EMPLOYEE REQUIREMENTS:
- Capable of following directions.
- Ability to work well with other employees and other building trades on the job.
- Capable of passing random drug screening tests.
- Attend instructional classes as required by his or her supervisor.
- Ability to take and act upon verbal and written direction.
LICENSES:
- A current drivers license
- Must have reliable transportation to various
- Evidence of U.S. citizenship or valid U.S. work permit.
ELECTRICAL EXPERIENCE:
No electrical work experience required. Full time work experience of some type is preferred.
EDUCATION:
Must possess a high school diploma GED or high school equivalent.
WORKING CONDITIONS:
- Job requires working in all elements (heat cold rain snow) depending on job location and time of year.
- Must be able to utilize construction site sanitary facilities (Porta-Jons).
- Job requires employees to own and have personal hand tools with them at all times. (A typical waist tool belt weighs approximately 30 lbs.)
- Work from all types of ladders (step (A frame) ladders up to 14 all sizes of extension ladders) and carry and relocate up to a 12 step ladder by ones self.
- Employees total weight with tools cannot exceed the weight limit of ladder. (Class 1-250 lbs. Class 1A-300 lbs.).
- Perform work at various heights (up to 90 above a finished floor or grade) fromladders scaffolds aerial lifts cat walks or other areas.
- Work in confined areas such as manholes utility tunnels crawl spaces attics etc.
- Wear personal protective equipment such as a hard hat safety glasses and work boots on a consistent basis and gloves respirators arc-flash protective gear etc. as conditions warrant their use.
- Repetitive use of arms hands and fingers and spending most of the work day standing kneeling standing on or traversing up and down a ladder.
- Able to work eight hours per day 40 hours per week including overtime as required and night shifts as appropriately scheduled.
PHYSICAL REQUIREMENTS AND SKILLS:
- Positively identify colors of wires.
- Have strength to bend conduit by hand with hand/foot benders up to 1-1/4 trade size E.M.T.
- Ability to utilize all power tools saws threaders wire tuggers hydraulic benders and knockout punches etc. as required.
- Capable of digging trenches either by use of hand tools or power equipment.
- Practice and comprehend safe work procedures per company policy.
- Operate two-handed tools/equipment cable cutters hammer drills compression tools jack hammers etc.
- Read and interpret maps instructional manuals specifications work site directions blue prints electrical schematics and written instructions.
- Operate and work from mechanical personnel lifts (electric or gas powered).
- Adaptability to new and changing requirements environments and/or information.
- Must be able to bend stoop squat crawl climb kneel balance push pull walk lift and reach overhead.
- Climb and descend ladders of all types safely.
- Complete overhead work for full-day assignments.
- Must be able to make transition from employee parking area or street into construction work areas and to gain access to all levels of building even if the only means of access is by O.S.H.A. approved site construction ladder or stairs still under construction but safe and acceptable for use.
- Possess good vision (normal or corrected) in marginally lit areas.
Required Experience:
Junior IC
JOB TITLE: ApprenticeREPORTS TO: Job Site Foreman assigned to specific job siteSCOPE OF WORK:Work responsibilities consist of installation of alterations to addition and/or repair of electrical systems including use of associated tools materials and equipment within the commercial and industrial ele...
JOB TITLE: Apprentice
REPORTS TO: Job Site Foreman assigned to specific job site
SCOPE OF WORK:
Work responsibilities consist of installation of alterations to addition and/or repair of electrical systems including use of associated tools materials and equipment within the commercial and industrial electrical industries.
RESPONSIBILITIES:
- Demonstrate safe work habits and proper care of tools and equipment.
- Understand language nomenclature and terms associated with construction documents.
- Demonstrate skills in the proper selection of and use of tools on the job.
- Produce a quantity of work equal to the job requirements of the companys standards.
- Produce a quality work that meets or exceeds the National Electrical Code requirements and the companys standards.
- Maintain a positive attitude toward completing a given job and complying with all companys policies.
EMPLOYEE TRAITS:
- Punctuality
- Dependability
- Positive Attitude
- Takes Initiative
- Expresses Interest in Work
- Cooperative
- Adaptable/Teachable
EMPLOYEE REQUIREMENTS:
- Capable of following directions.
- Ability to work well with other employees and other building trades on the job.
- Capable of passing random drug screening tests.
- Attend instructional classes as required by his or her supervisor.
- Ability to take and act upon verbal and written direction.
LICENSES:
- A current drivers license
- Must have reliable transportation to various
- Evidence of U.S. citizenship or valid U.S. work permit.
ELECTRICAL EXPERIENCE:
No electrical work experience required. Full time work experience of some type is preferred.
EDUCATION:
Must possess a high school diploma GED or high school equivalent.
WORKING CONDITIONS:
- Job requires working in all elements (heat cold rain snow) depending on job location and time of year.
- Must be able to utilize construction site sanitary facilities (Porta-Jons).
- Job requires employees to own and have personal hand tools with them at all times. (A typical waist tool belt weighs approximately 30 lbs.)
- Work from all types of ladders (step (A frame) ladders up to 14 all sizes of extension ladders) and carry and relocate up to a 12 step ladder by ones self.
- Employees total weight with tools cannot exceed the weight limit of ladder. (Class 1-250 lbs. Class 1A-300 lbs.).
- Perform work at various heights (up to 90 above a finished floor or grade) fromladders scaffolds aerial lifts cat walks or other areas.
- Work in confined areas such as manholes utility tunnels crawl spaces attics etc.
- Wear personal protective equipment such as a hard hat safety glasses and work boots on a consistent basis and gloves respirators arc-flash protective gear etc. as conditions warrant their use.
- Repetitive use of arms hands and fingers and spending most of the work day standing kneeling standing on or traversing up and down a ladder.
- Able to work eight hours per day 40 hours per week including overtime as required and night shifts as appropriately scheduled.
PHYSICAL REQUIREMENTS AND SKILLS:
- Positively identify colors of wires.
- Have strength to bend conduit by hand with hand/foot benders up to 1-1/4 trade size E.M.T.
- Ability to utilize all power tools saws threaders wire tuggers hydraulic benders and knockout punches etc. as required.
- Capable of digging trenches either by use of hand tools or power equipment.
- Practice and comprehend safe work procedures per company policy.
- Operate two-handed tools/equipment cable cutters hammer drills compression tools jack hammers etc.
- Read and interpret maps instructional manuals specifications work site directions blue prints electrical schematics and written instructions.
- Operate and work from mechanical personnel lifts (electric or gas powered).
- Adaptability to new and changing requirements environments and/or information.
- Must be able to bend stoop squat crawl climb kneel balance push pull walk lift and reach overhead.
- Climb and descend ladders of all types safely.
- Complete overhead work for full-day assignments.
- Must be able to make transition from employee parking area or street into construction work areas and to gain access to all levels of building even if the only means of access is by O.S.H.A. approved site construction ladder or stairs still under construction but safe and acceptable for use.
- Possess good vision (normal or corrected) in marginally lit areas.
Required Experience:
Junior IC
View more
View less